Fast, Reliable Windows & Doors Across Wilton Manors
Window and door replacement in Wilton Manors runs $4,500-$25,000 depending on scope, with impact-rated installations making up most of what we do here. We’re based in Fort Lauderdale and regularly on-site in Wilton Manors within the hour, especially for the flood-zone and wind-load requirements that make this city’s permitting different from anywhere else in Broward County. Call (844) 665-0162 for a free estimate.
Our Windows & Doors team knows the Island City’s building stock inside out: the 1950s-1960s CBS ranches along NE 26th Street and the river-fork streets, the original jalousie windows that fail every inspection, the moisture-damaged block cores we find behind the stucco. You don’t need a contractor who learns Wilton Manors on your dime. You need someone who walks in knowing why your slab shifts, why your door sticks after rain, and why the permit office will reject standard fasteners on a flood-zone home.
Why Groundwork Construction Co. of South Florida Is Wilton Manors’s Preferred Windows & Doors Company
We’ve worked the tight lots and zero-setback lines from the northeast quadrant down to the South Fork of the Middle River. Raymond Estevez built Groundwork on the principle that one contractor should handle every phase of a project, and in Wilton Manors that discipline matters more than most places. A window swap here almost always triggers electrical upgrades, structural remediation, and flood-assembly compliance. Juggling three separate trades on a small CBS lot is a scheduling nightmare we eliminate.
Our crews carry Broward County product approval documentation for every window and door brand we install. That’s not optional here. Post-Hurricane Irma enforcement means inspectors red-tag jobs with missing paperwork, and we’ve seen contractors from outside the county get stuck for weeks trying to backfill approvals. We arrive with Andersen, Pella, Marvin, Milgard, Jeld-Wen, Simonton, PGT, and CGI documentation already in the permit packet.
Response time to Wilton Manors averages under an hour from our Fort Lauderdale base. For impact-window emergencies after a storm, or when a sticking door frame turns out to be slab settlement threatening the whole opening, that speed matters. We stock common impact-rated sizes and hardware for the Island City’s predominant ranch footprint, so most jobs finish in one trip.
Our Windows & Doors Services in Wilton Manors
Window Installation
New window installation in Wilton Manors starts around $4,500 for vinyl replacements on a standard CBS ranch, climbing to $15,000 for full-house impact-rated upgrades. Every job we pull a permit for here has to account for the flood-zone assembly requirements that surround the city. We specify windows with proper sill pan flashing, sealed rough openings, and drainage planes that move water out even when the water table rises. On river-adjacent streets, we also inspect block-core moisture before sealing anything new into the opening.
Door Installation
Entry and patio door installation in Wilton Manors runs $2,500-$8,000 for standard units, more for custom impact-rated entries with sidelights. The Island City’s shifting slabs are the enemy of door longevity. We see frames rack and stick constantly on NE 26th Street and similar low-lying blocks where seasonal flooding and king tides undermine the slab. Our installs include adjustable thresholds, composite shims that won’t rot, and proper fastening into reinforced block rather than the corroded original anchors that fail within a season.
Window Replacement
Full window replacement on a typical Wilton Manors CBS ranch costs $4,500-$15,000. Most of these homes still run original jalousie windows or early aluminum single-hungs that leak air and water and can’t survive a wind-load inspection. We replace them with impact-rated vinyl or aluminum units that meet Broward’s post-Irma standards, and we size for the existing rough openings when possible to avoid the structural headaches that come with enlarging window bays on load-bearing CBS walls.
Impact Windows & Doors
Impact window and door installation is our most requested service in Wilton Manors, typically $8,000-$25,000 for a full-home package. The Island City’s FEMA flood-zone status and strict wind-load enforcement make impact-rated products the practical default, not a luxury upgrade. We specify PGT and CGI for the hurricane-rated performance most insurers now require, with Andersen and Pella options for homeowners who want architectural-grade aesthetics with the same impact resistance. Every unit carries the Miami-Dade or Florida Product Approval number the permit office demands.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilton Manors
We work with eight window and door manufacturers spanning mainstream through impact-rated and architectural lines: Andersen, Pella, Marvin, Milgard, Jeld-Wen, Simonton, PGT, and CGI. For the Island City’s flood-zone homes, we keep PGT and CGI hardware and replacement parts on our Fort Lauderdale trucks, along with common impact-rated sash and frame components. That inventory means we don’t order-and-wait for a broken latch or failed seal in storm season. For interior trim and surrounding finishes on full replacements, we also specify James Hardie siding, KraftMaid and Wellborn cabinetry for adjacent kitchen or bath work, and Cambria surfaces when window walls open into renovated living space. You choose the brand that fits your budget and taste. We handle the build.
Common Windows & Doors Problems We See in Wilton Manors Homes
- Jalousie windows rattle and leak during every downpour. The original 1950s louvered units on CBS ranches can’t compress weatherstripping properly, and their thin aluminum frames fail wind-load testing outright. We replace them with impact-rated horizontal rollers or picture windows that seal tight and pass inspection.
- Door frames rack and stick after heavy rain. On river-fork streets like NE 26th St, slab settlement from flood-prone soils throws door openings out of square. We diagnose the root cause, reframe if needed, and install adjustable systems that tolerate ongoing minor movement.
- Steel anchors and hinge screws corrode inside block cores. Salt-laden air and standing water attack standard fasteners in months, not years. We use stainless or coated hardware rated for coastal exposure, and we open the core to remediate corrosion before installing anything new.
- Permit pulls trigger mandatory electrical upgrades. The undersized panels common to 1960s Wilton Manors ranches don’t meet current code once a substantial renovation permit is active. We coordinate the electrical work so your window or door project isn’t held up by a panel swap you didn’t plan for.
Pricing for Windows & Doors in Wilton Manors, FL
Here’s what we see on the Island City’s window and door market. These are installed, permitted, and inspected prices for typical CBS ranch homes in the 33305 zip code.
| Service | Typical Range in Wilton Manors |
|---|---|
| Impact Window Installation | $8,000-$25,000 |
| Window Replacement | $4,500-$15,000 |
| Custom Windows & Doors | $4,500-$25,000 |
What moves you within these ranges? Unit count, of course, but also the condition of your block cores, whether we need to reframe out-of-square openings, and whether the permit triggers that electrical panel upgrade. Flood-zone homes on the northeast quadrant near the river forks almost always need more remediation than properties on higher ground toward the center of the island. We price upfront after a site visit, not from a satellite photo. Estimates are free. Call (844) 665-0162 to schedule.
We Also Serve Cities Near Wilton Manors
Our Fort Lauderdale base puts us within easy reach of Wilton Manors neighbors in Sunrise, North Andrews Gardens, Oakland Park, and Lauderdale-by-the-Sea. Each city has its own permitting quirks and housing stock, but the same Broward County wind-load standards apply across the board. If you’re outside the Island City limits, we still carry the same product approvals and flood-zone expertise.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Windows & Doors in Wilton Manors
Yes. Broward County’s wind-borne debris region covers the entire county, including the Island City, and post-Hurricane Irma enforcement requires impact-rated products or permanent shutters on all exterior openings. Your distance from the beach doesn’t exempt you. Call (844) 665-0162 and we’ll confirm the exact product approval your permit needs.
Yes, and it’s one of the most common upgrades we do in Wilton Manors. The rough opening usually needs reframing and the block core may need moisture remediation, but the slider itself installs cleanly once that’s addressed. We handled exactly this on a 1957 ranch on NE 26th Street, reinforcing the opening and sealing to flood-zone standards in one trip.
Slab settlement on flood-prone soils throws door frames out of square, and moisture swells any wood components in the jamb. In Wilton Manors, this is especially common on river-adjacent streets where the water table sits high. We diagnose whether it’s a framing issue, a slab issue, or both, then fix the root cause rather than just planing the door.
Yes. The City of Wilton Manors requires permits for all window and door replacements, and because most properties are in FEMA flood zones, the permit also triggers flood-resistant assembly inspections that wouldn’t apply in non-flood-zone Fort Lauderdale blocks. We pull permits as standard practice and include that coordination in our project management.
Usually yes. Terrazzo is common in 1950s-1960s Wilton Manors ranches and runs right up to the original door track. We cut carefully around the existing floor, set the new slider threshold to match, and patch with matching material when needed. We’ve preserved terrazzo through dozens of slider replacements on the Island City.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Wilton Manors since our Fort Lauderdale founding.