Window Replacement in Wellington - Same-Day Service, Done Right the First Time

Window Replacement in Wellington, FL: What It Costs and How Long It Takes

Window replacement in Wellington, FL typically runs $4,500-$15,000 for a full-home project and takes 2-5 days from demo to final trim. Most homes in our market need impact-rated or HVHZ-compliant units to satisfy post-Andrew code. Call (844) 665-0162 and we’ll walk your property with you, measure every opening, and deliver a written estimate with line-item pricing by the next business day.

Call (844) 665-0162

How We Handle a Window Replacement from Start to Finish

We’ve replaced windows across Berkshire Park, Sugar Pond Manor, and the Lakefield West area enough times to know the rhythm of this job. Here’s what actually happens, and what you’ll need to decide at each point.

Stage 1: Opening assessment and final spec lock (Day 1, 2-3 hours)

We arrive with laser measures and a Palm Beach County permit checklist. Your existing frames tell us whether we’re doing a pocket replacement or a full-frame tearout. Most Wellington homes built in the 1980s and 1990s have original aluminum frames set into CBS block with stucco returns, so we check for stucco cracking, moisture intrusion at the sill, and whether the block is plumb enough for a new nail fin. You’ll decide: pocket vs. full-frame, and whether to match existing room paint or resync your exterior color scheme. We photograph every opening and note any rotted wood or compromised flashing.

Stage 2: Demo and rough opening prep (Day 1-2, 4-6 hours per opening)

We remove sashes, frames, and exterior trim. On CBS construction, this means cutting stucco carefully to preserve the surrounding finish, then sealing the block edge with fluid-applied flashing. If we’re in a full-frame scenario, we expose the structural opening and install a new sill pan sloped to drain. You’ll need to decide now if you want to widen any openings, which triggers structural review and adds permit scope. We protect floors with Masonite and set up HEPA vacuums, dust containment is non-negotiable in occupied homes.

Stage 3: Window setting and mechanical fastening (Day 2-3, 3-4 hours per unit)

Each window gets shimmed plumb and level, then fastened through the jambs or nail fin per manufacturer spec, Miami-Dade HVHZ or FBC approval tags visible for inspection. We use low-expansion foam for air sealing, never fiberglass batt stuffed into a gap that’ll settle. At this point you’ll confirm hardware finish, if you haven’t already, brushed nickel and oil-rubbed bronze are the two we see most in Laurel Estates and Manchester Greens. We also verify egress compliance for bedrooms; older Wellington homes often have non-conforming openings that need enlargement.

Stage 4: Exterior integration and weatherproofing (Day 3-4, 2-3 hours per opening)

Stucco patch, new trim, or both. We match your existing texture, float finish, and paint, or install PVC trim if you want a maintenance-free solution that’ll hold up to Wellington’s wet season and sun exposure. The critical detail is the head flashing, we integrate it with your housewrap or existing weather barrier so water sheets over, not behind, the window. This is where cheap jobs fail, and where we spend time most homeowners never see.

Stage 5: Interior trim, cleanup, and final walkthrough (Day 4-5, 1-2 hours per unit)

Interior casing goes in, caulked and painted to match. We operate every sash, lock, and screen, check weep hole clearance, and confirm argon fill integrity on double-pane units with a thermal scanner. You sign off on a punch list, we schedule Palm Beach County final inspection if required, and we leave with debris hauled and floors vacuumed. The whole sequence from contract to final walkthrough is usually 3-4 weeks including permit procurement.

The Window Choices You’ll Actually Pick Between

We don’t show up with one brand and one style. Our Windows & Doors crew works with Andersen, Pella, Marvin, Milgard, Jeld-Wen, Simonton, PGT, and CGI, and we’ll spec across that range based on what your house needs and what you want to spend. Here are the real decisions:

• Vinyl framed, non-impact: Lowest cost, lowest maintenance, but won’t pass HVHZ inspection for most of Wellington. Fine for interior replacements or non-habitable spaces if your local code allows. Thermal performance is solid, color choices are limited to factory finishes.
• Vinyl framed, impact-rated: The sweet spot for most Wellington homeowners we work with in subdivisions like Brindlewood and Paddock Park. Laminated glass, reinforced frames, meets FBC and Miami-Dade requirements. Mid-range pricing, 15-20 year realistic lifespan in South Florida sun before frame chalking becomes visible.
• Aluminum framed, impact-rated: Slim sightlines, maximum glass area, but conducts heat. We specify thermal breaks on every unit, bare aluminum is a mistake in this climate. Higher cost than vinyl impact, better for architectural modern homes or where you want minimal frame visual weight.
• Fiberglass or composite framed, impact-rated: Premium tier. Marvin’s fiberglass and Pella’s Impervia lines hold paint better than vinyl, expand and contract less, and tolerate Wellington’s humidity without warping. You’ll pay 30-50% more than vinyl impact. Best for homeowners planning to stay 15+ years or matching high-end exterior trim like James Hardie siding.
• Single-hung vs. casement vs. fixed: Single-hung is standard, cost-effective, and what most replacements use. Casement seals tighter and catches cross-breezes off the wetlands, but costs more and has more moving parts. Fixed picture units are cheapest per square foot, obviously, but you need operable windows for egress and ventilation code.
• Glass packages: Low-E coating is standard. Argon fill adds thermal performance we recommend for west-facing walls that bake all afternoon. Laminated impact glass is non-negotiable for HVHZ compliance, but you choose tint level, clear, gray, or bronze, which affects both heat gain and how your exterior reads from the street.

Our approach is simple: you choose the brand and spec, we handle the build. That means no proprietary lock-in to a single manufacturer’s product line.

What Window Replacement Costs in Wellington, FL

Full-home window replacement in Wellington typically falls between $4,500 and $15,000. Here’s what moves you within that range:

A written estimate from us includes: all windows, frames, hardware, screens, low-E/argon glass, installation labor, rough and finish carpentry, stucco patch and paint match, permit fees, and debris removal. What it typically doesn’t include: interior repainting beyond the immediate window surround, window treatments, or landscaping repair if we need equipment access through planted beds. We flag these before you sign, not after.

Call (844) 665-0162 for an exact quote on your specific openings, estimates are free and we measure every unit in person.

Why Wellington Homes Make This Job Different

Wellington’s housing stock is remarkably consistent: CBS block, stucco exterior, built between the late 1970s and early 2000s, originally fitted with aluminum-framed single-pane windows that predate every modern energy and impact code. Drive through Sugar Pond Manor or along Belvedere Road and you’ll see the same construction DNA repeated with minor variation. That uniformity is useful, we know before we arrive what we’re likely to find, but it also means nearly every window replacement here triggers the same two complications.

First, the original aluminum frames are embedded in stucco returns that crack with thermal cycling. Pocket replacement is often impossible without destroying the surrounding finish, so we budget for full-frame work and stucco patch more often than not. Second, Palm Beach County enforces HVHZ (High Velocity Hurricane Zone) requirements strictly, even though Wellington sits just west of the direct coastal zone. Every replacement window needs either impact-rated glass or approved shutters, and the county inspector will check manufacturer approval numbers and fastening patterns at final. We’ve worked with enough Wellington properties to know which inspectors prioritize frame integration details and which focus on operability clearances.

The water table here is also unforgiving. While window replacement doesn’t involve foundation work, we see moisture damage at sills more frequently than in drier markets, especially on north-facing walls that never fully dry during wet season. Our prep includes probing for soft block and recommending sill pan upgrades where drainage has failed.

And yes, we’ve worked on equestrian properties near The Trace and on estate homes where the construction scope included both residential window packages and barn ventilation systems. That dual-track experience, common in Wellington and virtually nonexistent in neighboring Greenacres or Royal Palm Beach, shapes how we think about airflow, humidity control, and material durability on every job we take here.

Frequently Asked - Window Replacement in Wellington

Ready to Replace Your Windows in Wellington?

Call (844) 665-0162 to schedule a free, on-site estimate for window replacement in Wellington. We’ll walk your property, measure every opening, discuss material options from our full brand roster, and deliver a written quote with line-item pricing. No deposit required to schedule, and we coordinate Palm Beach County permits and inspections as part of every project. If you’re considering a broader exterior update, we can also discuss how this fits as part of a full Windows & Doors in Wellington project, or coordinate with our Vinyl Fence in Wellington or Aluminum Fence in Wellington crews if you’re refreshing multiple exterior elements. We serve Wellington and surrounding communities including Loxahatchee and Greenacres.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Wellington since our South Florida launch.