Full Kitchen Remodeling in Country Club: What It Costs, How Long It Takes, and What Changes
Country Club Kitchen Remodeling typically runs $14,000-$45,000 and takes 6-10 weeks from permit approval to final inspection. We’re talking about stripping the room to studs, replacing or relocating everything that isn’t structural, and rebuilding with new cabinets, countertops, appliances, lighting, and flooring. Call (844) 665-0162 and we’ll walk your space, talk through what’s actually possible with your existing layout, and give you a written estimate with line-item pricing.
This isn’t a refresh. Kitchen Remodeling means the sink might move, the wall oven becomes a range, the fluorescent box disappears in favor of recessed and pendant lighting, and that 1989 drywall gives way to something you actually want to look at while you make coffee. In Country Club, where much of the housing stock was built between 1985 and 2005, we regularly open walls to find aluminum wiring, inadequate circuits for modern appliances, and original cabinets that have absorbed three decades of South Florida humidity.
How a Full Kitchen Remodel Actually Unfolds
We’ve refined this into five clear stages. Each one has a duration, a decision deadline, and a point where the homeowner needs to be available or have made a choice.
Stage 1: Demo and discovery (3-5 days)
We strip cabinets, countertops, flooring, appliances, and fixtures down to the studs. This is where we find what the home inspection missed: corroded cast-iron drain lines, ungrounded outlets, or a load-bearing wall that the original builder didn’t bother to mark. In Country Club’s CBS construction, we also check for moisture intrusion at exterior walls where stucco meets the block. You’ll need to have decided on your cabinet line by day two of this stage, because lead times for KraftMaid or Wellborn run 6-8 weeks and we need to order immediately.
Stage 2: Rough mechanicals and structural work (5-10 days)
Electricians run new 20-amp circuits for the range, microwave, and garbage disposal. Plumbers relocate drain lines if you’re moving the sink or adding a prep sink on the island. If we’re removing a wall to open to the living area, a structural engineer stamps the beam plan and we install a flush LVL or steel header. This stage can’t overlap with inspections, and Miami-Dade requires electrical and plumbing rough-ins to pass separately before insulation or drywall goes in.
Stage 3: Drywall, paint, and flooring prep (4-7 days)
New drywall goes up where we opened walls, followed by primer and two coats of paint on ceilings and any walls not getting tile. Flooring gets prepped: if you’re doing tile, we lay cement board; if luxury vinyl plank, we check slab flatness to 3/16″ over 10 feet. This is when you finalize your backsplash tile selection and appliance delivery dates, because both need to arrive before cabinets do.
Stage 4: Cabinet and countertop installation (7-14 days)
Cabinets go in first, leveled and screwed to blocking in the CBS walls. We template for countertops immediately after, then Cambria, Silestone, or your chosen surface fabricates off-site for 1-2 weeks. Appliance hookups happen as units arrive. The sink and faucet get connected once countertops are secured. This is the stage where most homeowners feel the project “becomes real” - and where delays hurt most if a cabinet shipment slips.
Stage 5: Finish work, inspection, and punch list (3-5 days)
Backsplash tile goes up, final electrical fixtures and under-cabinet lighting get connected, and we run the full appliance test. Miami-Dade requires a final inspection for any permitted electrical or plumbing work. We walk the space with you, note anything that needs adjustment, and typically return within 48 hours to close the punch list.
The Real Choices You’ll Make for Full Kitchen Remodeling
Every decision below moves your number and your daily experience. We don’t default you to mid-grade; we show you the trade-off and let you allocate where it matters.
- Cabinet construction: Stock particleboard boxes with thermofoil doors start around $4,000-$6,000 for a typical Country Club kitchen. Semi-custom plywood boxes with hardwood doors from KraftMaid or Wellborn run $8,000-$13,000. Full custom hits higher, but for most 1980s-1990s homes with standard ceiling heights, semi-custom gives you the storage optimization without paying for bespoke dimensions you don’t need.
- Countertop material: Laminate at $40-$60 per square foot installed is functional but dated quickly. Engineered quartz from Cambria or Silestone at $75-$120 per square foot resists etching and doesn’t need sealing, which matters in a kitchen that sees daily use. Natural granite runs similar to quartz but requires annual sealing. We see Country Club homeowners split about 70/30 toward quartz for durability in humid air.
- Appliance tier: Builder-grade stainless packages run $3,000-$5,000. Professional-style ranges and built-in refrigeration push to $12,000-$20,000. The real question isn’t prestige; it’s whether your existing electrical and gas service can support a 48-inch dual-fuel range without a panel upgrade.
- Layout changes: Keeping the sink, range, and refrigerator in their existing locations saves $2,000-$5,000 in plumbing and electrical relocation. Moving any one of them across the room means trenching in the slab, which in Country Club’s high water table conditions can mean dewatering and same-day concrete repair to prevent groundwater seepage.
- Island addition: A fixed island with storage and seating runs $3,000-$10,000 depending on size, countertop overhang, and whether we’re running electrical for outlets or a cooktop. In open-concept conversions common here, the island becomes the kitchen’s work surface and social anchor.
What Full Kitchen Remodeling Costs in Country Club, FL
Full kitchen remodeling in Country Club runs $14,000-$45,000. Where you land depends on five variables we assess during your on-site estimate.
| Cost Driver | Low-End Impact | High-End Impact |
|---|---|---|
| Kitchen size (sq ft) | 100 sq ft galley, minimal material | 300+ sq ft with island, extensive surfaces |
| Existing condition | Post-2000 build, modern electrical | Pre-1994 build, aluminum wiring, corroded drains |
| Plumbing/electrical relocation | Fixtures stay put | Sink moves across room, panel upgrade needed |
| Material grade | Stock cabinets, laminate counters | Semi-custom cabinets, quartz, professional appliances |
| Permit and code scope | Cosmetic replacement, no structural | Wall removal, HVHZ compliance triggers |
The low end of our range assumes a compact kitchen, stock cabinets, minimal layout changes, and a home that doesn’t surprise us behind the drywall. The high end covers large kitchens with island additions, professional appliances, structural modifications, and the code compliance layers that Miami-Dade’s HVHZ jurisdiction can require when work touches load-bearing elements or the exterior envelope.
Our written estimates include demo, disposal, all materials with specified brands, labor, permits, and inspections. What typically isn’t included: appliance costs (you purchase separately or we source at your direction), temporary kitchen setup, and any repair work outside the kitchen footprint discovered during demo. We flag likely contingencies before we start, not after.
What Country Club Homes Specifically Do to This Job
Our Country Club service area sits in ZIP 33015, inside Miami-Dade County’s High-Velocity Hurricane Zone - the strictest wind-load jurisdiction in the United States. This isn’t abstract code language. It means that any full kitchen remodeling project that touches a structural wall, modifies the roofline for a clerestory or skylight, or alters window openings triggers full current HVHZ compliance, even in a 1987 tract home built to far looser standards.
We’ve worked on plenty of kitchens in the subdivisions off NW 186th Street and around Country Club Drive where the original build predates Hurricane Andrew. Homeowners often assume a kitchen is “interior” and exempt from the hurricane code that dominates roofing conversations. But remove a wall to open the kitchen to the family room, and the inspector wants to see how that beam ties into the lateral load path. Add a window over the sink where there wasn’t one, and suddenly you’re in NOA-product territory for Impact Windows & Doors in Country Club that a Broward County neighbor would never face.
The other Country Club reality is below your feet. This area sits on porous Miami Limestone with a water table that can rise to within 18-24 inches of grade during the wet season. Any plumbing relocation that requires trenching in the slab - moving the sink to an island, for instance - needs to happen in the drier months when possible, with same-day concrete repair and positive drainage planning to prevent groundwater from finding its way through your new flooring six months later. We’ve learned to sequence slab work carefully here, and we build that timing into our project schedule from day one.
Finally, most Country Club neighborhoods carry HOA deed restrictions with architectural review requirements. Exterior changes from kitchen work - new window styles, exhaust vent locations, any stucco repair - need HOA approval in parallel with Miami-Dade permits. We handle both tracks, but it adds 2-4 weeks to pre-construction that homeowners in unregulated areas don’t face.
Serving Country Club, FL - Our Local Coverage Area
We’re based in the Country Club area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Full Kitchen Remodeling in Country Club
From permit approval to final inspection, 6-10 weeks. Pre-construction adds 3-6 weeks for HOA approval, cabinet lead times, and Miami-Dade permit review. Call (844) 665-0162 and we can give you a realistic timeline for your specific kitchen and season.
Yes, for any electrical, plumbing, or structural work - which covers virtually every full remodel. Miami-Dade requires permits for circuit additions, fixture relocation, and wall modifications. We pull permits as part of our standard process and schedule inspections so you don’t have to coordinate with the county.
Absolutely, and it saves significant cost and time. Keeping the sink, dishwasher, range, and refrigerator in their existing locations avoids slab trenching and structural engineering. Many Country Club homeowners choose this path, especially in galley kitchens where the layout already functions. We still achieve a complete transformation with new cabinets, countertops, lighting, and appliances.
Relocating the sink, range, or major appliances typically adds $2,000-$5,000 per fixture in plumbing and electrical work, plus potential slab repair. Removing a load-bearing wall for an open concept adds $3,000-$8,000 for engineering and beam installation. For a precise breakdown on your kitchen, call (844) 665-0162 - estimates are free.
We warranty our workmanship for one year on installation and assembly. Manufacturer warranties apply to cabinets, countertops, and appliances - typically 5 years to lifetime depending on the brand and product tier. We register all warranties in your name and provide documentation at project closeout.
Get Your Full Kitchen Remodeling Estimate in Country Club
Call (844) 665-0162 to schedule a free on-site estimate for full kitchen remodeling in Country Club. Raymond Estevez or a senior project lead will walk your space, measure, photograph existing conditions, and talk through what’s possible with your layout and budget. You’ll receive a written estimate with line-item pricing within 48 hours - no deposit required to review.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Country Club and South Florida homeowners since our founding.