Walk-In Showers & Shower Remodeling in Kings Point, FL
Walk-in showers & shower remodeling in Kings Point, FL typically runs $4,500-$12,000 for a full installation or gut renovation, with most projects taking 10-18 business days from demolition to final inspection. If you’re replacing an existing tub or shower in one of Kings Point’s 1970s-era condos or villas, expect the timeline to stretch longer than a standard Delray Beach single-family job due to Kings Point association notification and quiet-hours requirements. Call (844) 665-0162 and we’ll walk through your unit’s specific constraints on a free on-site estimate.
How We Approach Walk-In Showers & Shower Remodeling
We’ve done enough bathroom work in Kings Point to know the sequence by heart. Here’s what actually happens, and where your decisions matter most.
Stage 1: Association package and pre-demo survey (2-5 days)
Before we touch a tile, we submit your project to the Kings Point condo/HOA association with full plans, material specs, and our insurance documentation. While that processes, we survey your unit’s existing plumbing - in buildings from this era, we regularly find galvanized supply lines or early CPVC that won’t survive a modern pressure-balancing valve. You’ll decide now whether to replace visible plumbing only, or open walls to upgrade the full riser. That choice alone can shift your budget by $800-$2,400.
Stage 2: Demolition and rough-in (2-4 days)
We remove the existing enclosure, pan, and surrounding wallboard down to studs. In Kings Point’s CBS construction, we often hit concrete block behind the wet wall rather than wood framing, which changes how we anchor grab bars, niche shelves, and glass hardware. If you’re keeping your drain in place, we verify pitch with a laser level; if you’re moving it, we cut the slab and reroute, which adds a day and requires a separate plumbing inspection.
Stage 3: Waterproofing and prep (1-2 days)
This is where corners get cut on cheaper jobs, and we don’t. We use liquid-applied or sheet membrane systems rated for flood testing, with seams taped and corners reinforced. You’ll see us flood-test the pan overnight before any tile goes up. The decision here is membrane type: liquid is more forgiving on irregular block surfaces common in these buildings; sheet offers faster cure times but demands flatter substrates.
Stage 4: Tile, fixtures, and glass (3-6 days)
Your tile layout gets dry-fitted first. We set a ledger, work out from the bottom, and use epoxy grout in the pan area for stain resistance. Fixture mounting happens after tile cure - pressure-balancing valve, handheld or rain head, and any body sprays. Glass enclosure measurement comes last, after tile is fully set; frameless requires tighter tolerances and typically adds 7-10 days to the overall timeline since it’s fabricated to order.
Stage 5: Final inspection and walkthrough (1-2 days)
Kings Point projects often need two inspections: plumbing rough and final. We schedule around association access windows and quiet-hours rules, which means final sign-off can land a few days after work completes. We do our own punch list first, then walk the job with you.
The Spec Choices That Define Your Walk-In Shower
Every walk-in shower & shower remodeling job in Kings Point involves a handful of decisions that determine how the space functions and what it costs. Here’s where our clients typically land:
- Shower pan material: Acrylic or fiberglass bases run $400-$900 installed and work well for standard sizes. Custom tile pans with linear drains start around $1,800 but let you shape the footprint and eliminate the curb entirely for true zero-entry access. The trade-off is maintenance: acrylic is forgiving, tile demands consistent grout sealing.
- Wall surround: Large-format porcelain or ceramic tile dominates our Kings Point jobs, typically $8-$22 per square foot material. Solid surface panels (Corian, Swanstone) cost more upfront, install faster, and have no grout lines to maintain. We see solid surface chosen most often by seasonal residents who lock up their unit for months at a time.
- Fixtures and valves: Pressure-balancing valves are code minimum; thermostatic valves maintain temperature within 1-2 degrees and cost $200-$400 more. For seniors or anyone with neuropathy, thermostatic is worth the upgrade. Handheld wands on slide bars add $150-$350 and improve accessibility without a full ADA retrofit.
- Glass enclosure: Framed sliding doors ($600-$1,200) seal better and handle out-of-plumb walls common in older buildings. Frameless hinged doors ($1,400-$3,200) need walls within 1/8″ of true, which sometimes means skim-coating block before tile. Semi-frameless splits the difference.
- Grab bars and accessories: Decorative grab bars in finishes matching your fixtures ($80-$200 each) let you future-proof without institutional aesthetics. We block for them during rough-in even if you don’t install immediately.
Our Bathroom Remodeling in Kings Point crew can fold these choices into a wider project if you’re also replacing vanity, flooring, or layout. But walk-in showers & shower remodeling stands on its own as a defined scope.
What Walk-In Showers & Shower Remodeling Costs in Kings Point, FL
Walk-in shower installation and shower remodeling in Kings Point, FL ranges from $4,500 to $12,000. Here’s what pushes you toward either end:
| Cost Factor | Low-End Impact | High-End Impact |
|---|---|---|
| Keeping existing drain location | Saves $800-$1,500 | Moving drain adds slab work + plumbing inspection |
| Plumbing condition | Visible-only replacement | Full riser upgrade in galvanized/CPVC buildings |
| Wall substrate | Standard cement board | Block wall prep, skim-coating, waterproofing |
| Fixture grade | Builder-grade chrome | Thermostatic valves, designer finishes |
| Glass enclosure | Framed sliding door | Frameless custom, heavy glass |
| Association timeline | Minimal - villa with quick approval | Condo with neighbor notification, quiet-hours scheduling |
A written estimate from us includes demolition, disposal, rough and finish plumbing, waterproofing, tile or surround installation, fixtures, glass, and final cleanup. It does not include permit fees (typically $150-$400 in Palm Beach County), association application costs, or any structural repairs discovered after demo. We flag likely contingencies during our first site visit so you’re not surprised.
Many homeowners doing walk-in showers & shower remodeling also update exterior protection while trades are coordinated. We handle Roof Replacement & Installation in Kings Point and Metal Roofing in Kings Point through the same project team, which matters in a community where aging flat roofs and hurricane-code upgrades are ongoing concerns.
What Kings Point Specifically Does to This Job
Kings Point isn’t Delray Beach with a different ZIP. The 33484 community’s 55+ association structure changes how walk-in showers & shower remodeling actually gets built.
Every project clears the Kings Point condo/HOA approval process first. That means architectural review, proof of insurance, and defined work hours - typically 8 a.m. to 4 p.m. weekdays, no weekends. Because unit walls are shared, neighbor notification is mandatory, and we’ve learned to pad timelines by 3-5 days for association processing alone. The quiet-hours scheduling is non-negotiable; we’ve seen contractors locked out mid-job for violating it.
The housing stock matters too. These 1970s-early 1980s CBS buildings often have concrete block wet walls rather than wood studs. That affects waterproofing adhesion, grab-bar anchoring, and whether we can chase new plumbing without core-drilling block. Original galvanized or early CPVC plumbing is common, and in our experience, about half the shower remodels we quote in Kings Point need at least partial supply-line replacement once we open walls.
Palm Beach County’s humidity and hurricane exposure add another layer. Post-1994 Florida building codes don’t automatically apply to cosmetic work, but any plumbing relocation or electrical upgrade triggers current compliance review. We plan for that in our initial scope so you’re not mid-project when an inspector flags an issue that should have been caught at design.
We cover Kings Point from our Fort Lauderdale base, and our Bathroom Remodeling team knows the association rhythms here well enough to schedule realistically.
Serving Kings Point, FL - Our Local Coverage Area
We’re based in the Kings Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Walk-In Showers & Shower Remodeling in Kings Point
Most projects run 10-18 business days from demolition to final inspection, but Kings Point association approval and quiet-hours scheduling typically add 3-5 days compared to an equivalent job in unregulated Delray Beach. Call (844) 665-0162 and we’ll confirm your building’s current association timeline.
Yes, Palm Beach County requires plumbing permits for drain relocation, valve replacement, or any new supply lines, plus a final inspection. Your Kings Point association also requires its own approval before work begins. We handle both permit packages as part of our standard process.
Usually, yes. Keeping the drain and valve in place saves $800-$1,500 and avoids slab cutting. The limitation is layout: you’re locked into your current footprint, which may not accommodate a zero-entry pan or larger enclosure. We map this out during your free estimate.
A walk-in shower is any curbless or low-curb enclosure designed for step-in access; a tub-to-shower conversion specifically removes an existing tub and replaces it with a shower. In Kings Point’s compact 1970s bathrooms, conversions often free 6-10 square feet of floor space, but they require drain relocation more frequently than replacing an existing shower.
We warranty our workmanship on waterproofing, tile installation, and plumbing connections. Fixture warranties come from the manufacturer - typically 5 years to lifetime depending on brand and finish. We register these for you and keep records on file, which helps if you’re a seasonal resident filing a claim from out of state.
Get Your Free Estimate for Walk-In Showers & Shower Remodeling in Kings Point
Call (844) 665-0162 to schedule a free on-site estimate. We’ll survey your existing bathroom, check accessible plumbing, review your association requirements, and deliver a written scope with line-item pricing. No deposit required to book; we start when you’re ready and the association approves.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Kings Point and South Florida.