What Does a Paver Driveway Cost and Take in Lantana?
Paver driveway installation in Lantana typically runs $7,000-$18,000 for a standard residential project, with most builds completing in 4-7 business days from excavation to final compaction. We’re Groundwork Construction Co., and you can reach our driveway crew at (844) 665-0162 for a free on-site estimate that breaks down your specific scope. Every paver driveway we build in Lantana starts with a soil and drainage assessment, because this close to the Intracoastal, water management isn’t optional.
How We Build a Paver Driveway in Lantana
We’ve refined our paver driveway process across Palm Beach County into five clear stages. Here’s what actually happens, and what you’ll need to decide at each point.
Stage 1: Site assessment and utility locate (Day 1)
We mark utilities, photograph the existing surface, and measure slope toward the street. In Lantana’s older neighborhoods, we’re often working against flat yards that pool water during summer downpours, so we note where French drains or channel drains may need tying in. You’ll decide whether to keep your existing driveway footprint or expand toward the garage or walkway. This takes 2-3 hours; you don’t need to be home if we have yard access.
Stage 2: Demolition and rough excavation (Days 1-2)
We remove asphalt, concrete, or old pavers, then excavate to 8-10 inches below finished grade depending on expected vehicle load. For the 1950s-1970s CBS homes common in Lantana, we frequently find shallow original driveways with no proper base course. We haul everything off-site same-day. You’ll confirm the final driveway dimensions and any radius or border details before we cut the edge.
Stage 3: Base installation and compaction (Days 2-3)
We lay geotextile fabric, then build the structural base in two lifts of crushed limestone (typically #57 stone, then screenings), compacting each layer with a plate compactor and checking with a laser level. In Lantana’s low-lying areas, we may increase base depth or add a permeable base detail to help with stormwater. You’ll choose your paver pattern and border style at this stage if you haven’t already; production holds until we confirm material delivery.
Stage 4: Bedding sand, paver laying, and edge restraint (Days 3-5)
We screed 1 inch of coarse bedding sand, lay pavers to pattern, cut border pieces with a wet saw, and install aluminum or concrete edge restraints spiked into the compacted base. For driveways seeing daily vehicle traffic, we recommend herringbone or basketweave patterns over running bond; the interlock handles torque better. You’ll do a walkthrough before we move to final compaction.
Stage 5: Compaction, joint sand, and cleanup (Day 5-7)
We run the plate compactor across the finished field, sweep polymeric joint sand into gaps, compact again, and blow off excess. The driveway is usable immediately, though we ask you to avoid sharp turns or heavy braking for 48 hours while the joint sand sets. We leave you with care instructions and our project closeout packet.
The Paver Choices You’ll Actually Decide Between
Not all pavers suit every Lantana driveway. Here’s what we see homeowners weighing:
- Standard concrete pavers (2 3/8″ thickness, $7,000-$11,000 typical): The practical choice for most Lantana homes. Brands like Belgard’s Bergerac or Tremron’s Oakleaf handle Florida UV without significant fading, and the 2 3/8″ profile carries standard passenger vehicles fine. Trade-off: edges can chip if you regularly park heavy trucks or trailers.
- Thick vehicular pavers (3 1/8″ thickness, $9,500-$14,000 typical): We spec these for driveways with boat or RV parking, or where the approach angle from the street is steep and creates point loads. The added material cost is 15-20%, but the reduced replacement risk pays back over a decade. Trade-off: fewer color and texture options in the thicker profile.
- Porcelain pavers ($12,000-$18,000 typical): Low water absorption, near-zero salt staining, and modern large-format looks. In Lantana’s salt-air environment, this matters more than inland. Trade-off: requires a stiffer base and precise bedding; not forgiving of subgrade movement. We only recommend these where drainage is already proven.
- Permeable paver systems ($10,000-$16,000 typical): Open-graded base and wider joints let rainfall percolate through, reducing runoff toward the street. Palm Beach County’s stormwater rules make these increasingly relevant for larger driveways or corner lots. Trade-off: requires periodic vacuuming or power-washing to prevent joint clogging with sand and leaf debris.
- Border and inlay detailing: A contrasting soldier course or decorative inlay adds 8-15% to material cost but defines the driveway visually against Lantana’s common flat-roofed, stucco-heavy architecture. We typically mock this in chalk before ordering.
Our Driveway & Pavers crew keeps sample boards from Belgard, Unilock, Tremron, and Techo-Bloc on the truck, so you’re choosing from actual products, not a catalog photo.
What Paver Driveways Cost in Lantana, FL
| Scope | Typical Range |
|---|---|
| Standard single-car driveway (10′ x 20′) | $7,000-$10,500 |
| Two-car driveway (20′ x 20′) | $11,000-$16,000 |
| Two-car with walkway or apron extension | $13,500-$18,000 |
| Existing concrete removal and haul-away | $800-$2,200 |
| Drainage correction or channel drain add | $900-$2,500 |
Five factors push your number up or down:
1. Existing surface condition. Removing thin, cracked concrete costs less than breaking out thick, steel-reinforced slabs or dealing with asphalt over concrete “sandwich” construction.
2. Driveway size and geometry. Straight rectangles are efficient. Radius cuts, circular turnarounds, or integrating with an existing Driveway & Pavers in Lantana patio add labor.
3. Material grade and pattern complexity. Basic running bond in a standard color sits at the low end. Multi-piece random patterns with custom borders move you toward the top.
4. Drainage requirements. Flat lots near the Intracoastal often need catch basins, channel drains, or regrading tied to the municipal storm system. We price this from survey, not guesswork.
5. Permit and inspection scope. Palm Beach County requires permits for driveway replacement when the work exceeds 200 square feet or changes the impervious surface ratio. We handle submittals, but the permit fee and required inspections add $350-$700 depending on project value.
Our written estimates itemize base work, materials, drainage, permit, and finish. What typically isn’t included: tree or stump removal, relocating sprinkler heads beyond three, or repairing damage to underground utilities that weren’t properly marked.
What Lantana’s Conditions Mean for Your Driveway
Lantana’s housing stock shapes nearly every paver driveway we quote here. The town is built out with post-WWII concrete block stucco homes from the 1950s through 1970s, many on original driveways that were poured thin with no reinforcement and no drainage planning. We regularly work on streets like Hypoluxo Island and near the Ocean Avenue corridor, where the combination of flat lots, original built-up roofs, and aging infrastructure means water has nowhere to go.
The salt-laden air this close to the Atlantic corrodes standard steel edge restraints within three to five years. We spec aluminum or stainless edging as standard, not an upgrade. And because so much of Lantana sits in FEMA AE flood zones, any substantial improvement project that crosses the 50% assessed-value threshold triggers full flood-elevation compliance. A paver driveway alone won’t push you there, but homeowners often bundle driveway replacement with other exterior work, and that’s where the math matters. We pull the flood map and property appraiser records before we write a contract, not after.
Palm Beach County’s post-Andrew wind code doesn’t directly govern driveway construction, but it does affect any attached structures, gates, or columns integrated with the driveway edge. If you’re considering a motorized gate or pillar-mounted lighting as part of the project, we’ll flag the impact-rated requirements early.
Homeowners in Lantana sometimes pair exterior hardscape work with ADU Design & Permitting in Lantana or Garage Conversion ADU in Lantana, since both trigger the same flood-code scrutiny and it’s efficient to align the permitting. Our Lantana team coordinates across these project types under one contract.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Paver Driveways in Lantana
Most residential paver driveways in Lantana finish in 4-7 business days, assuming no utility conflicts or weather delays. Summer afternoon thunderstorms can pause excavation and base work, so we build flex days into our schedule from June through September. Call (844) 665-0162 and we’ll confirm current lead times for your neighborhood.
Yes, Palm Beach County requires a permit for driveway replacement exceeding 200 square feet or altering the impervious surface ratio. We prepare the site plan, drainage calculations, and submittal as part of our scope. The permit typically takes 7-10 business days for approval, and the county schedules two inspections: rough grade and final.
We can often work around sprinkler heads located outside the driveway footprint, but any heads in the excavation path must be relocated or capped. We include up to three sprinkler adjustments in our standard estimate; beyond that, we coordinate with your irrigation contractor or handle it as an add-on. We’ll map your system during the initial assessment so there are no surprises.
Paver driveways typically cost 30-50% more upfront than poured concrete for the same square footage, with Lantana projects running $7,000-$18,000 for pavers versus $4,500-$12,000 for concrete. The trade-off is repairability: individual pavers can be lifted and replaced if settled or stained, whereas concrete requires cutting and patching or full replacement. For the salt-air, high-humidity environment here, that repairability often extends useful life.
We warranty our installation workmanship, including base compaction and drainage performance, for a period we specify in your written contract. Paver manufacturers warranty their product against defects; specific terms vary by brand and are documented with your material invoice. We do not warranty against settling caused by undocumented underground conditions or homeowner alterations after completion. Ask for the specific warranty packet during your estimate review.
Ready to Price Your Paver Driveway in Lantana?
We’ll walk your driveway, check drainage and access, and leave you with a written estimate that itemizes every stage. No deposit required to schedule, and we serve Lantana from our Fort Lauderdale base. Call (844) 665-0162 or request your free estimate through our site. Raymond Estevez or a senior member of our team will handle your consultation directly.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Lantana since our South Florida founding.