How Much Does Door Installation Cost in Andover, and How Soon Can It Start?
Door installation in Andover typically runs $450-$2,200 for a standard prehung entry door and $800-$4,500 for impact-rated or wind-load-rated replacements, with most single-door projects completed in one day and full retrofits taking two to three days. We pull permits through Broward County’s HVHZ-compliant process, so you’re looking at roughly 5-10 business days from signed contract to first day on site. Call (844) 665-0162 and we’ll walk your exact opening, check your existing frame condition, and give you a written estimate with no obligation.
How We Handle Door Installation from First Measure to Final Walkthrough
We’ve installed doors across enough 1950s-1970s CBS homes in Andover to know where the surprises hide. Here’s how the work actually breaks down.
Stage 1: Site measure and product selection (Day 1, 60-90 minutes on site)
Raymond Estevez or one of our project leads measures the rough opening, checks the existing frame for rot or termite damage, and notes whether the home has original concrete block construction with integrated steel lintels or a later wood-framed modification. You’ll decide on door material (steel, fiberglass, or wood), impact rating if required, and hardware finish. We photograph the opening and existing jamb condition for our permit submittal.
Stage 2: Permit pull and material order (Days 2-7)
Broward County requires HVHZ product approval on all exterior doors in Andover’s ZIP 33023. We submit your door’s Miami-Dade or Florida Product Approval number with the permit application. This stage is mostly waiting, but we’ll confirm your delivery date and call to schedule installation once the permit clears.
Stage 3: Demo and rough opening prep (Day of install, 2-4 hours)
We remove the existing door, frame, and any damaged surrounding material. On older Andover homes, we often find original terrazzo floors that sit higher than modern thresholds, or concrete block openings that need grinding for proper jamb seating. If your home lacks hurricane strapping at the header, we’ll discuss whether to add it now or note it for a future exterior envelope project.
Stage 4: Door hang, hardware set, and seal (2-6 hours depending on complexity)
We install the prehung unit or retrofit frame, shim plumb, and secure with structural fasteners rated for your wall type. Impact-rated units get additional anchoring at the hinge side. We set hardware, test lock function, and apply sealant to the exterior perimeter. On homes with original flat or low-slope roofs, we’re careful to maintain proper head flashing integration.
Stage 5: Inspection and final walkthrough (Day of install or next business day)
Broward County inspectors verify HVHZ compliance, proper fastener schedule, and operability. We walk you through the door’s operation, cleaning requirements for your specific material, and warranty registration with the manufacturer. You’re left with permit closure docs and a final invoice.
The Door Options You’ll Actually Choose Between
Andover homeowners usually land on one of these configurations. Each has honest trade-offs:
- Steel prehung entry door ($450-$1,100 installed): Best security-per-dollar ratio, won’t warp in South Broward’s humidity, and takes paint well. The downside is dent susceptibility and thermal conductivity, so we typically specify a thermal break if the door gets direct afternoon sun.
- Fiberglass prehung with wood-grain finish ($700-$1,600 installed): Won’t rust, won’t rot, and insulates better than steel. The grain texture has improved dramatically in the last decade. We specify these for homeowners who want the wood look without the maintenance burden in our 60-plus-inch annual rainfall.
- Solid wood or wood-clad ($1,200-$2,800 installed): Unmatched aesthetic, especially on mid-century Andover homes where an authentic period look matters. Requires refinishing every 2-3 years in this climate. We source from manufacturers with stable South Florida supply chains to avoid warping from humidity swings during delivery.
- Impact-rated fiberglass or steel ($1,400-$4,500 installed): Required for any door within a mile of the coast, and strongly recommended throughout ZIP 33023 given Broward’s HVHZ status. These carry Miami-Dade NOA numbers and include reinforced frames, multi-point locks, and laminated glass inserts. The upfront cost stings, but insurance discounts and storm-season sleep quality offset it over time.
- Outswing vs. inswing: Outswing improves water intrusion resistance during driving rain, common in our June-October wet season. Inswing is more familiar to most homeowners and required by some Andover HOAs. We note this on every estimate because it affects threshold design and interior floor space.
Hardware runs $80-$400 depending on brand and smart-lock integration. We stock Baldwin, Schlage, and Emtek lines, or you can supply your own.
What Door Installation Costs in Andover, FL
| Scope | Typical Range |
|---|---|
| Standard prehung replacement (steel or fiberglass) | $450 - $1,600 |
| Impact-rated entry door with frame | $1,400 - $4,500 |
| Double-door or French door unit | $1,800 - $5,500 |
| Sliding patio door (non-impact) | $1,200 - $3,200 |
| Sliding patio door (impact-rated) | $2,500 - $6,500 |
| Frame reconstruction or structural header repair | $400 - $1,800 additional |
Five factors push your number up or down:
1. Existing frame condition: Original 1960s wood frames in Andover are often punky at the sill. If we can reuse the frame, you’re at the low end. Full frame replacement adds $200-$600.
2. Wall type and fastening: Concrete block with steel lintels requires masonry anchors and more labor than wood-framed openings. Most Andover homes are CBS, so we price for this standard.
3. Impact rating requirement: HVHZ-rated doors cost 40-80% more than standard equivalents, but they’re non-negotiable for code compliance on exterior replacements.
4. Size and configuration: Standard 36″ x 80″ single doors are predictable. Sidelights, transoms, or double-door setups multiply material and labor.
5. Relocation or structural modification: Moving a door to a new wall location requires header engineering, potential electrical rerouting, and permit amendments. We flag this immediately if your project involves it.
Our written estimates include the door unit, frame, hardware, labor, permit fees, and inspection scheduling. What isn’t included: interior trim painting, smart home integration beyond basic lock installation, and any flooring repair needed after threshold height changes. Call (844) 665-0162 for an exact quote on your specific opening.
What Andover Homes Specifically Do to This Job
Andover sits within ZIP 33023 in Broward County, one of Florida’s High-Velocity Hurricane Zone jurisdictions. That designation isn’t bureaucratic fine print, it reshapes every door installation we perform here.
The neighborhood’s concentration of 1950s-1970s concrete block homes means we routinely open walls that predate modern hurricane strapping, impact-resistant opening requirements, and current Florida Building Code minimums. When we pull a permit for door installation in Andover, the inspector will check that your new door carries a Miami-Dade or Florida Product Approval number rated for HVHZ wind loads. We’ve seen out-of-county crews source standard Florida-approved materials that fail this check, killing the inspection and forcing a reorder.
The water table sits just 2-5 feet below grade across much of South Broward, and with 60-65 inches of annual rainfall concentrated in a six-month wet season, any water intrusion at the threshold becomes a real problem fast. We specify sloped sills, proper pan flashing, and sealant details that interior-state contractors often skip. On homes with original flat or low-slope roofs, we’re especially careful about head flashing integration, because roof runoff has nowhere else to go.
Many Andover properties still carry original terrazzo floors that sit higher than modern thresholds. We account for this in our measure, either by specifying a taller threshold unit or by discussing floor transition options with you before we order. It’s the kind of detail that separates a door that functions from one that looks right but leaks air and water.
Homeowners in this area often pair exterior upgrades with Chain Link Fence in Andover or Vinyl Fence in Andover projects, since the same permit cycle and HVHZ awareness apply. If you’re considering a full exterior envelope update, our Windows & Doors in Andover page covers how we coordinate multi-opening projects under a single permit and inspection sequence.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Door Installation in Andover
Most single prehung door installations are completed in one working day. Impact-rated retrofits or jobs requiring frame reconstruction typically take two days, plus a separate inspection visit that we schedule. Call (844) 665-0162 and we’ll confirm your timeline after seeing the opening.
Yes. Broward County requires permits for all exterior door replacements in ZIP 33023, and the door must carry HVHZ product approval. We handle the permit submittal, fee payment, and inspection scheduling as part of our standard process. Homeowners who skip permitting risk failed resale inspections and insurance complications.
Absolutely, if you’re replacing a door in its existing location. We work within the existing rough opening without touching utilities in probably 80% of Andover jobs. Relocating a door to a new wall is a different project that requires checking for electrical runs, HVAC ducts, and structural header design.
A standard steel prehung entry door in an existing wood frame, non-impact-rated, typically starts around $450 installed. However, if your home is in a designated flood zone or your insurer requires impact resistance, the code-compliant minimum jumps to impact-rated fiberglass or steel starting near $1,400. We clarify this during our initial site visit so there’s no surprise.
The door itself carries the manufacturer’s warranty, typically 10 years to lifetime depending on brand and material. Our installation workmanship is warranted for one year, covering settling, air infiltration, and hardware function issues. We register your product warranty with the manufacturer at completion so you’re covered directly for material defects.
Ready to Get Your Andover Door Installation Started?
Call (844) 665-0162 to schedule a free on-site estimate. Raymond Estevez or a member of our Windows & Doors crew will measure your opening, check frame and wall condition, confirm your HVHZ compliance path, and deliver a written estimate within 24 hours. We serve Andover and surrounding South Broward communities including Miramar, West Park, Hollywood, and West Hollywood.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Andover and South Florida homeowners since 2015.