What Does Impact Windows & Doors Installation Cost and Involve in Tequesta?
Impact windows & doors in Tequesta typically run $8,000-$25,000 for a full-home installation, with most projects completed in 2-4 weeks from permit approval. The job includes removing existing openings, installing Miami-Dade HVHZ-rated impact glass systems, and sealing the envelope to current Palm Beach County wind-load codes. Call (844) 665-0162 for a free on-site estimate - we’ll measure every opening and spec the right product tier for your home’s exposure.
Tequesta’s position at the northern Palm Beach County coastline puts every home in a direct hurricane path, and the salt air from both the Atlantic and the Intracoastal accelerates corrosion on standard hardware. That’s why the village building department, which operates independently of Palm Beach County, enforces strict product approval lists and inspection protocols. We’ve worked with that department long enough to know which manufacturers’ documentation they accept without delay, and which ones trigger additional engineering review.
How We Handle Impact Windows & Doors From First Measurement to Final Inspection
Every impact windows & doors project in Tequesta moves through five distinct stages. Here’s what happens, what you’ll need to decide, and how long each phase takes.
Stage 1: Opening survey and product selection (Day 1-3)
We measure every rough opening to 1/8-inch tolerance, document existing wall construction - whether it’s the 1960s CBS typical of Tequesta’s older neighborhoods or newer frame construction from a teardown rebuild - and photograph current conditions. You’ll decide between aluminum or vinyl framing systems, single-hung versus casement operation, and glass options (standard laminated or enhanced Low-E coatings). For waterfront homes along the Loxahatchee River or near Coral Cove Park, we also assess exposure rating, which determines whether standard impact glass or higher-pressure-rated systems are required. This stage takes 1-2 days.
Stage 2: Engineering and permit submission (Day 4-14)
We generate stamped drawings showing missile-impact ratings, anchorage schedules, and pressure calculations for each opening. The Village of Tequesta building department reviews these against the Florida Building Code’s High-Velocity Hurricane Zone requirements. If your home sits in an AE or VE flood zone - common along the river and Intracoastal lots - we coordinate elevation certificates with your existing documentation. Permit turnaround here averages 7-10 business days, faster than Palm Beach County proper but slower if federal flood-zone documentation needs updating.
Stage 3: Product ordering and staging (Day 15-35)
Lead times vary dramatically by manufacturer. PGT and CGI, both Florida-based and familiar to Tequesta inspectors, typically deliver in 3-4 weeks. Custom sizing or architectural-grade finishes from Andersen or Marvin can extend to 6-8 weeks. We don’t demo until product is in our warehouse and inspected. You’ll confirm final hardware finishes and screen options during this window.
Stage 4: Removal and installation (Day 36-42)
We remove existing windows and doors in sections, never more openings than we can weatherproof before leaving for the day. For the 1960s-1980s ranch homes common in Tequesta, this often reveals corroded steel lintels or termite-damaged buck framing that must be repaired before new units go in. Installation of a typical 15-opening home takes 4-5 working days. Our crew is our crew - we don’t subcontract the envelope work.
Stage 5: Sealing, finishing, and inspection (Day 43-50)
We apply code-compliant sealant systems, install exterior trim or stucco patch to match, and protect all work during cure time. The village inspector verifies anchorage, glazing tape application, and operational function. We schedule this; you don’t chase permits. Final walkthrough includes cleaning, screen installation, and warranty registration.
The Impact Windows & Doors Choices That Actually Change Your Project
Not every “impact-rated” window performs the same in Tequesta’s specific conditions. Here’s what you’ll weigh:
- Aluminum framing versus vinyl: Aluminum handles the large spans common in Tequesta’s modern waterfront rebuilds without sagging, and it stands up to salt-air corrosion better than budget vinyl. Vinyl insulates better thermally and costs 15-20% less, but maxes out at smaller sizes. For homes near the river with direct east exposure, we typically spec aluminum.
- Single-hung versus casement versus fixed: Single-hung ventilate vertically and cost least. Casements seal tighter against wind-driven rain - critical for Tequesta’s hurricane exposure - but need clearance for swing. Fixed picture windows are strongest structurally and cheapest per square foot, but don’t open. Most Tequesta homes mix all three.
- Standard laminated glass versus Low-E/impact hybrid: Standard laminated meets code. Low-E coatings cut solar heat gain by 30-50%, which matters for west-facing Tequesta homes that bake afternoon sun. The upgrade adds $40-$80 per opening.
- PGT WinGuard versus CGI Estate Collection versus Andersen Stormwatch: PGT and CGI are Florida-native brands with established Miami-Dade NOA approvals - Tequesta’s building department knows them, inspections move faster. Andersen Stormwatch offers finer sightlines and more finish options but at premium pricing and longer lead times. We stock PGT and CGI for standard projects; spec Andersen when architecture demands it.
- Permit scope - windows only, or full envelope: If you’re replacing windows as part of a full Windows & Doors in Tequesta project, we coordinate door and window permits together, saving a second inspection cycle and often reducing per-opening costs.
Our Windows & Doors crew works directly with our hardscape and roofing teams too. Homeowners often pair impact window installation with Aluminum Fence in Tequesta or Iron Fence in Tequesta to complete the exterior envelope under one schedule and one point of accountability.
What Impact Windows & Doors Costs in Tequesta, FL
| Project Scope | Typical Range |
|---|---|
| Partial home (8-12 openings) | $8,000-$14,000 |
| Full home replacement (15-25 openings) | $14,000-$22,000 |
| Full home with architectural-grade products | $20,000-$25,000 |
| Single large opening (sliding glass door, picture window) | $3,500-$7,500 |
Five factors push any Tequesta job up or down within these ranges:
Existing condition of openings. The 1960s-1980s CBS homes throughout Tequesta often have corroded aluminum frames fused to stucco, or steel lintels degraded by salt air. Remediation adds $200-$600 per opening.
Size and configuration. Standard 36-by-72-inch single-hungs are economical. Custom shapes, corner units, or oversized sliding doors for Intracoastal-view great rooms multiply material and labor costs.
Product tier selected. PGT WinGuard single-hung in white vinyl runs roughly 40% below CGI Estate aluminum with custom bronze finish and impact-rated Low-E. Both meet code; one matches a $2M waterfront rebuild, the other a practical upgrade for a 1970s ranch.
Flood-zone and elevation requirements. Homes in AE or VE zones along the Loxahatchee River may need additional structural documentation or modified anchorage if the original construction predates current FEMA maps. This is paperwork, not product, but it adds time and engineering cost.
Interior trim and finish repair. We include exterior stucco patch and basic interior casing in our estimates. Custom millwork, tile surround repair, or drywall remediation beyond the rough opening is quoted separately.
Every estimate we write in Tequesta specifies product manufacturer, series, and glass package by name. No “or equivalent” language. You choose the brand; we handle the build.
Why Tequesta’s Homes and Rules Change This Job
Tequesta isn’t Palm Beach County in miniature. The village runs its own building department with its own inspectors, and they know the local housing stock intimately - which means shortcuts get caught.
The bulk of homes we work on here were built between the 1960s and 1980s: concrete block stucco ranches and split-levels, many with original single-pane aluminum windows that haven’t been code-compliant since the 1990s. These homes present predictable failure modes - corroded fasteners, missing or degraded flashing, and electrical panels that can’t handle modern HVAC loads, let alone whole-home impact glass with integrated smart hardware. When we open a wall for window replacement, we often find the framing behind has been compromised by decades of minor leaks that never showed interior damage.
Waterfront properties along the Loxahatchee River face an additional layer. The river’s Wild and Scenic River Act status means any work near the shoreline - including window replacement on homes with close setback - can trigger Army Corps of Engineers Section 404 review if it involves structural modification or access changes. Out-of-area contractors regularly miss this. We build federal permit timelines into our schedules when the property line sits within 100 feet of mean high water.
The salt-air exposure here is also more severe than inland Jupiter or Palm Beach Gardens. Fasteners that last 20 miles west may show corrosion in 8-10 years on a Tequesta Intracoastal home. We spec 316 stainless or proprietary coated hardware for every coastal installation, not standard zinc-plated.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Impact Windows & Doors in Tequesta
From permit approval to final inspection, most Tequesta projects finish in 2-4 weeks. The permitting itself adds 7-10 business days through the village building department, and product lead times range from 3-8 weeks depending on manufacturer. We don’t remove existing openings until your new product is in hand and inspected. Call (844) 665-0162 to check current lead times for your preferred brand.
Yes - every impact window and door replacement requires a Village of Tequesta building permit with Miami-Dade HVHZ product approval documentation. The village issues its own permits separately from Palm Beach County, and they inspect for proper anchorage, sealant application, and operational function. We handle the entire permit process as part of our project scope.
In most Tequesta homes, yes. Standard window and door replacement doesn’t require plumbing or electrical relocation unless you’re changing the opening size or converting a window to a door. The 1960s-1980s CBS construction common here makes this straightforward - block walls don’t contain plumbing or wiring in the same cavities as frame construction. We’ll confirm during the opening survey if your specific layout changes this.
Repairing existing non-impact windows - re-glazing, hardware replacement, weatherstripping - typically costs $150-$400 per opening but doesn’t achieve code compliance or hurricane protection. Full impact windows & doors replacement in Tequesta runs $8,000-$25,000 for a typical home but adds structural protection, insurance discounts, and resale value. For homes with original single-pane aluminum frames, repair is usually a temporary fix; replacement is the permanent solution.
Manufacturer warranties vary by brand - PGT and CGI typically offer lifetime limited glass breakage and seal-failure coverage on residential installations, while Andersen and Marvin carry 20-year glass and 10-year non-glass component warranties. Our installation workmanship is warranted for the period we specify in your written contract. We register all warranties with the manufacturer and provide you documentation at final walkthrough. Call (844) 665-0162 for the specific terms on your preferred product line.
Get Your Free On-Site Estimate for Impact Windows & Doors in Tequesta
We’ll measure every opening, assess your home’s exposure and existing conditions, and spec the right impact windows & doors product for your budget and architecture. No pressure, no generic quotes - a written estimate with manufacturer, series, and installed price within 48 hours of our visit. Call (844) 665-0162 or submit your contact details to schedule.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Tequesta and northern Palm Beach County.