Aluminum Fence Installation in Davie: Timeline, Cost, and What to Expect
An aluminum fence installation in Davie typically runs $4,000-$10,000 for a standard residential lot, with most projects completed in 3-5 business days after permits clear. You’ll get a corrosion-resistant perimeter that handles South Florida’s salt air far better than steel, without the maintenance demands of wood. Call (844) 665-0162 for a free on-site estimate and we’ll measure your line, check setback requirements, and give you a written quote before we leave.
How We Build an Aluminum Fence in Davie
We’ve installed aluminum fencing across Davie’s larger ranch lots, from the equestrian parcels out near Griffin Road to the older CBS neighborhoods around Davie Road. The process doesn’t change much house to house, but the site conditions do. Here’s how we sequence it.
Day 1: Layout and utility locate. We walk your property line with you, mark post locations with spray paint, and call 811 for the underground utility locate. In Davie, we routinely hit shallow groundwater on the western lots, so we also probe post holes to check if we’ll need longer posts or gravel bedding to keep the base above the water table. You decide fence height (4′, 5′, or 6′ are standard for residential) and whether you want flat-top or spear-top pickets.
Day 2: Post setting. We dig holes 30″ deep on 6′ centers, set aluminum posts in wet concrete, and plumb each one before the mix sets. On Davie’s 1960s-1980s lots, we sometimes find old sprinkler lines, shallow drainage, or remnants of previous fences that weren’t permitted. If we hit any of that, we stop and show you before cutting or relocating. Post setting is the one day you don’t want rain, and Davie’s afternoon thunderstorms in summer can push us to the next morning.
Day 3: Rail and picket hang. Once posts are set, we snap in the horizontal rails and fasten pickets with color-matched screws. Standard spacing is 3-13/16″ between pickets for pool code compliance, or tighter if you want more privacy. We also hang gates on this day, which is where most homeowners feel the price difference: a single 4′ walk gate is standard, but a 10′ double drive gate with a steel frame adds $800-$1,800 depending on hardware.
Day 4: Hardware, latches, and pool safety check. We install self-closing hinges and child-safe latches on any gate with pool access. Broward County requires these on all pool barriers, and Davie’s inspectors check them specifically. We walk the line with you, touch up any scuffs from shipping, and make sure you’re satisfied with swing direction and latch height.
Permit closeout (varies). Davie uses Broward County’s building division for structural permits, but if you’re in an equestrian overlay zone or your HOA has architectural review, that runs parallel. We handle the county inspection scheduling; you handle HOA submission if required. Most permits clear in 10-15 business days, though Davie’s dual-agency process for agricultural-adjacent properties can stretch that.
The Aluminum Fence Options You’ll Actually Pick Between
Not all aluminum fence is the same. The spec sheet matters here because Davie’s salt air will find the weak points. These are the decisions we walk homeowners through:
- Grade of aluminum: Residential-grade (.040″ wall thickness) handles most Davie backyards fine. Commercial-grade (.0625″) is worth the upgrade if you have large dogs, frequent gate use, or you’re fencing a corner lot with wind exposure. The price jump is roughly 25-30% but the posts and rails won’t flex.
- Coating system: We spec polyester powder coat over a chromate conversion coating, not liquid paint. The good stuff carries an AAMA 2604 rating, which means 10+ years of color retention in full South Florida sun. Cheaper imports skip the chromate layer and chalk within 3-4 years.
- Picket profile: Flat-top is clean and modern, spear-top adds a traditional look and slight security deterrent. In Davie’s equestrian zones, we sometimes spec no-picket ranch rail (2, 3, or 4 horizontal rails) for pasture boundaries. That’s a different product line but the same aluminum construction.
- Gate hardware: Standard gravity latches work for walk gates. Pool gates need Magna-Latch or equivalent child-safe vertical pull latches. Drive gates get heavier ball-bearing hinges and optional automatic openers, which we can coordinate but typically sub to a dedicated access-control technician.
- Footing depth and drainage: On Davie’s western lots with high water tables, we sometimes recommend 36″ holes with 6″ of gravel below the post base rather than concrete to the bottom. It costs a bit more in labor but prevents the frost-heave-like popping we see when water saturates and freezes the post in place during cold snaps.
What Aluminum Fence Costs in Davie, FL
| Component | Typical Range |
|---|---|
| Standard aluminum fence (150 linear feet, 4′ height) | $4,000-$6,500 |
| Upgraded aluminum fence (6′ height, commercial grade, decorative accents) | $6,500-$10,000 |
| Single walk gate (4′) | $400-$700 |
| Double drive gate (10’-12′) | $1,200-$2,500 |
| Pool safety hardware upgrade | $150-$400 |
| Old fence removal and disposal | $300-$800 |
| Permit and inspection fees (Broward County) | $250-$500 |
Five variables push you to the high or low end of that $4,000-$10,000 range. First, linear footage: Davie’s ranch-style lots are often 10,000+ square feet, so backyard fences run longer than in denser Fort Lauderdale neighborhoods. Second, existing fence removal: old chain link comes out fast; old concrete-footed wood or rusted steel takes time. Third, grade changes: a sloped lot needs rackable panels or stepped installation, which adds labor. Fourth, material grade and finish: AAMA 2604 coating in a custom color costs more than standard black or bronze. Fifth, access: if we can’t get a truck within 50 feet of your line, we hand-carry materials and that shows up in labor.
Our written estimate includes materials, posts, concrete, standard hardware, permit application, and county inspection scheduling. It does not include HOA application fees, tree or stump removal, sprinkler repair if we hit a line, or automatic gate openers. We’ll flag any of those as line-item options before you sign.
What Davie’s Conditions Do to Aluminum Fence Work
Davie sits in a peculiar spot for construction. The western edge of town drains toward the Everglades, and that higher water table means we regularly hit saturated soil at 18-24 inches when digging post holes. On a job near Orange Drive last year, we had to switch from standard 30″ holes to 36″ with gravel bases because the concrete wouldn’t set against standing water. That’s not a failure of planning; it’s Davie geography, and any contractor who doesn’t account for it will have posts lean within two seasons.
The housing stock matters too. Most Davie homes were built between the 1960s and 1980s, before the 1994 Florida Building Code overhaul. Their original fences, if they existed, were often unpermitted chain link or wood installed by previous owners without setback surveys. When we pull a permit for new aluminum fence, Broward County sometimes flags old, non-compliant structures that must be documented or removed. We’ve learned to run a property records check before quoting, so you’re not surprised by a code-compliance hold.
Then there’s the equestrian overlay. Davie is one of the only South Florida municipalities that still maintains active A-1 and equestrian zoning districts. If your property touches one of these zones, or if you’re fencing a barn, paddock, or agricultural outbuilding, Davie’s Planning and Zoning Division must sign off on equestrian use compatibility before Broward County Building Division issues the structural permit. It’s a two-agency sequence that trips up out-of-town builders who treat it like a standard accessory structure. We’ve navigated it enough to know the timing: typically 5-10 additional business days if the use is clearly residential, longer if the structure is agricultural and needs compatibility review.
Finally, the salt air. Davie isn’t directly on the coast, but we’re close enough that aluminum fence still outperforms steel or iron by a wide margin. We spec 6063-T6 alloy with a proper powder coat, and we avoid any hardware that isn’t aluminum or stainless. Galvanized steel fasteners will rust through in 3-4 years here, even inland.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Aluminum Fence in Davie
Most residential aluminum fence projects in Davie take 3-5 working days on-site after permits are issued. Permit processing through Broward County typically adds 10-15 business days, or slightly longer if you’re in an equestrian overlay zone requiring Davie Planning and Zoning compatibility review. Call (844) 665-0162 and we can check current permit turnaround times for your specific address.
Yes, Broward County requires a building permit for any fence over 4 feet tall or any fence with concrete footings. Davie itself does not issue the structural permit but may require Planning and Zoning review if your property is in or adjacent to an equestrian overlay district. We handle the county permit application and inspection scheduling as part of our standard process.
Aluminum fence handles Davie’s salt air and intense UV better than vinyl in two specific ways: it won’t become brittle or fade in color after 7-10 years of sun exposure, and it won’t crack if impacted by lawn equipment or falling branches. Vinyl is lower-maintenance and slightly cheaper upfront, but aluminum offers cleaner lines for modern homes and better durability on larger properties with wind exposure. We install both and can show you samples from our Fence Installation crew.
Usually yes, if your sprinkler lines run 18 inches or deeper and we can locate them with the 811 utility mark. In Davie, older systems from the 1970s and 1980s were often shallowly buried and poorly mapped. We probe before digging and stop if we find an unmarked line; repair is typically $150-$400 if we need to splice and reroute. We flag this risk in your estimate so there’s no surprise.
A standard 150-linear-foot aluminum fence in Davie runs $4,000-$6,500 installed, including permit and standard hardware. Larger lots common in Davie’s ranch-style neighborhoods, or upgrades to 6′ height and commercial-grade aluminum, push that toward $8,000-$10,000. Call (844) 665-0162 for an exact quote - estimates are free and we measure on-site.
Get Your Aluminum Fence Estimate in Davie
We’ll come to your property in Davie, walk the line with you, check for utilities and drainage conditions, and leave you with a written estimate that breaks out materials, labor, permit, and any options like gate upgrades or old fence removal. No deposit required to schedule. Call (844) 665-0162 or reach out through our site. If you’re also updating your driveway or adding a patio, ask about bundling with our Driveway Repair & Replacement in Davie or Patios, Walkways & Pool Decks in Davie - our Fence Installation in Davie crew coordinates directly with the hardscape team, so you’re not managing multiple contractors.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Davie and South Florida.