What Cabinets & Countertops Installation Costs and Involves in Surfside, FL
Cabinets & countertops replacement in Surfside typically runs $6,000-$19,500 for a standard kitchen, with most projects completed in 5-10 working days once materials arrive. You’ll choose between stock, semi-custom, and fully custom cabinet grades paired with laminate, solid surface, or engineered quartz countertops - and the combination you pick drives both the price and the lead time. Call (844) 665-0162 for a free on-site estimate with written pricing.
How we handle cabinets & countertops from first measurement to final walkthrough
Day one is demolition and discovery. We pull the existing cabinets, remove countertops, and expose what’s actually behind them - water damage around the sink cabinet, out-of-level walls in 1960s Surfside condos, or galvanized plumbing that needs updating before anything new goes in. This takes four to six hours for a typical kitchen. You’ll know by end of day whether we’re working with your existing footprint or if hidden conditions will adjust the scope.
Days two and three are prep and rough-in. We level the base, repair drywall or plaster where old cabinets came out, and relocate any plumbing or electrical lines you’ve chosen to move. In Surfside’s older condo stock, we often find the original electrical doesn’t meet current Miami-Dade requirements for GFCI protection and dedicated appliance circuits - this is when we flag it, not after installation starts. If you’re keeping your layout, this stage shrinks to a single day.
Week two is cabinet installation, typically two to four days depending on complexity. Stock cabinets from KraftMaid or Wellborn go faster; custom pieces with inset doors and built-in organizers take longer. We shim, level, and anchor every unit to wall studs or blocking - critical in Surfside’s concrete construction where standard stud spacing doesn’t exist. You’ll do your hardware selection (pulls, hinges, soft-close upgrades) during this window if you haven’t already.
Countertop templating happens once cabinets are set and level, usually day five or six. For engineered quartz from Cambria, Silestone, or Caesarstone, we send precise digital templates to fabrication; turnaround is typically 7-14 business days. This is the pause in your project, and we schedule it deliberately so you’re not living without a kitchen longer than necessary.
Final installation and punch takes one to two days. Countertops arrive, we seam (if needed), install undermount sinks, reconnect plumbing, and test everything. You walk through with our lead carpenter to confirm door alignment, drawer glide function, and finish match. We don’t consider the job closed until you’ve signed off.
The cabinet and countertop choices that actually change your kitchen
- Stock cabinets (KraftMaid, standard lines): Pre-sized in 3-inch increments, limited door styles, 4-6 week lead times. Best for straightforward layouts where you don’t need fillers or modifications. Holds up fine for rental properties or budget-conscious flips in Surfside’s investment condos.
- Semi-custom cabinets (Wellborn, KraftMaid Designer): Mix-and-match sizes, dozens of door profiles, interior upgrades like pull-out pantries and tray dividers. The sweet spot for most Surfside homeowners - you get tailored storage without the price of fully custom. Lead times run 8-12 weeks.
- Laminate countertops: Budget-friendly, hundreds of patterns, but seams show and heat damage is permanent. Fine for secondary kitchens or properties you’re not holding long-term.
- Engineered quartz (Cambria, Silestone, Caesarstone): Non-porous, no sealing, consistent patterning, and superior impact resistance for busy kitchens. Higher upfront cost but lower lifetime maintenance - we install this in nearly every Surfside primary residence we work on.
- Keeping existing cabinet boxes with new doors and countertops: Cuts 30-40% off the project if your carcasses are structurally sound. We see this often in Surfside’s better-maintained 1970s and 1980s condos where the original cabinets were built in place and can’t be replaced with standard sizes anyway.
What cabinets & countertops cost in Surfside, FL
| Component | Typical Range |
|---|---|
| Cabinet Installation | $4,000-$13,000 |
| Countertop Installation | $2,000-$6,500 |
| Combined Cabinets & Countertops | $6,000-$19,500 |
Five variables push you toward the low or high end of these ranges. First, cabinet grade: stock boxes with slab doors versus semi-custom with full-overlay raised panels can double the material cost alone. Second, countertop material and edge detail - a standard eased edge in laminate versus a mitered waterfall quartz island aren’t close in price. Third, whether we relocate plumbing, electrical, or structural elements; moving a sink from one wall to another adds rough-in costs that pure replacement avoids. Fourth, existing condition - water-damaged subfloors, corroded cast iron plumbing, or concrete wall irregularities in Surfside’s older buildings all require remediation before installation begins. Fifth, permit scope: Miami-Dade requires permits for electrical and plumbing modifications, and Surfside’s post-2021 inspection regime adds a layer of scheduling complexity that can extend timelines.
A written estimate from Groundwork includes demolition, disposal, cabinet and countertop supply, installation, plumbing reconnect, and final cleanup. It does not include appliance installation, flooring replacement, or painting - those are separate trades, though we coordinate them if you’re pursuing a full Kitchen Remodeling in Surfside.
Why cabinets & countertops in Surfside aren’t like the same job inland
Surfside’s construction landscape changed permanently after the Champlain Towers South collapse in 2021. Every permit we pull now triggers enhanced structural scrutiny from Miami-Dade, and condo association clients frequently arrive with court-ordered repair timelines or SIRS-mandated reserve spending requirements. This shapes how we bid and schedule cabinets & countertops work here - the conversation is often deadline-driven, not discretionary.
The housing stock itself demands specific expertise. Surfside’s mid-century oceanfront and near-ocean condominiums, built from the 1960s through 1980s, were constructed with post-tensioned concrete slabs and rebar that’s been corroding in salt-saturated air for decades. We’ve opened cabinets in buildings along Harding Avenue and Collins Avenue to find the concrete behind them actively spalling - not cosmetic damage, but a life-safety issue that must be addressed before new cabinetry can anchor safely. The shallow water table, often just two to four feet below grade, means moisture migration through slab edges is constant, and we specify cabinet materials and installation methods that account for it.
Simultaneously, several legacy buildings have been demolished and replaced with new luxury high-rises, creating an unusual mix: we’re installing KraftMaid and Cambria in brand-new concrete construction one week, then carefully fitting semi-custom cabinets into irregular 1970s concrete openings the next. Both jobs happen in Surfside, but they’re different projects requiring different preparation. Our Kitchen Remodeling crew has handled both repeatedly.
We serve Surfside and neighboring Bay Harbor Islands, North Miami, Golden Glades, and Miami Shores with the same material rigor - but the regulatory and physical conditions here are distinct.
Serving Surfside, FL - Our Local Coverage Area
We’re based in the Surfside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently asked - cabinets & countertops in Surfside
Most projects run 5-10 working days on site, plus 2-4 weeks for countertop fabrication after templating. Lead times for semi-custom cabinets add 8-12 weeks before work begins. Call (844) 665-0162 and we’ll check current availability for your specific material choices.
Yes, if you’re modifying plumbing, electrical, or structural elements - which most kitchen updates do. Miami-Dade requires permits for sink relocation, circuit additions, and any wall modification. Surfside’s post-2021 inspection protocol means permit review takes longer than in unincorporated areas; we handle submission and scheduling as part of our project management.
Absolutely, and it’s the most cost-effective approach if your current layout functions well. Keeping the sink, dishwasher, and range in existing locations eliminates rough-in costs and typically avoids the extended permit timeline that plumbing relocation triggers. We assess this during your free estimate.
Refacing existing cabinet boxes with new doors, drawer fronts, and hardware runs roughly 30-40% less than full replacement, typically landing in the $4,500-$9,000 range for cabinets alone plus countertops. It works only if the original carcasses are structurally sound and square - something we verify before recommending it.
Our installation workmanship is backed by Groundwork’s standard project warranty, while cabinet and countertop manufacturers carry their own material warranties - typically limited lifetime on cabinet boxes and 10-15 years on engineered quartz surfaces. We register all warranties in your name and provide documentation at project closeout. For exact terms on your selected brands, call (844) 665-0162.
Get your cabinets & countertops estimate in Surfside
We’ll visit your Surfside property, measure precisely, assess existing conditions, and deliver a written estimate with material options across multiple price tiers - no obligation, no pressure. Homeowners often pair kitchen updates with Walk-In Showers & Shower Remodeling in Surfside or a Tub-to-Shower Conversion in Surfside to consolidate their renovation timeline under one contractor. Call (844) 665-0162 to schedule.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Surfside and South Florida.