Chain Link Fence in Tamarac, FL - What It Costs and How Long It Takes
A chain link fence installation in Tamarac typically runs $3,500-$9,000 for residential properties, with most single-family jobs completed in 2-4 business days once permits clear. You’ll get galvanized or vinyl-coated mesh on steel posts set in concrete, with gates and tension hardware included. Call (844) 665-0162 and we’ll walk your property, check for underground utilities, and give you a written estimate with no obligation.
Tamarac’s 1960s-1980s housing stock shapes how we approach this work. The city’s garden-style condos and single-family homes on quarter-acre lots often need perimeter fencing that handles Broward’s wet season drainage, corrosive soil conditions, and the occasional tropical storm without failing at the posts. We’ve installed chain link around pool enclosures, side-yard dog runs, and full property lines from the Mainlands to the Woodlands, and the specs change based on what’s already in the ground.
How We Build a Chain Link Fence - Stage by Stage
Day one is layout and utility verification. We mark your property line against your survey, call 811 for underground locates, and flag any sprinkler lines, shallow drainage, or pool plumbing that runs where posts need to go. In Tamarac, we regularly hit original 1970s irrigation systems that weren’t mapped properly, so this step isn’t optional. You’ll decide gate placement and walk-through width now; changing it later means pulling posts.
Day two is excavation and post setting. We auger 24-30 inch holes through Tamarac’s sandy, water-adjacent soil, sometimes hitting standing water that requires dewatering before we pour. Posts get set in 80-pound bag concrete, sloped for runoff. For corner and terminal posts, we use larger diameter pipe and deeper footings because those carry the tension load. If your job is part of a full Fence Installation in Tamarac project with multiple materials, we sequence chain link last so it doesn’t get damaged during other trades.
Day three is framework and mesh. Top rail, line posts, and tension bands go in first. We stretch the mesh with a fence puller, attach with wire ties at 12-inch intervals, and thread tension bars through the end loops. The mesh comes in 9-gauge residential or 6-gauge commercial; most Tamarac homeowners pick 9-gauge with a 2-inch diamond. Vinyl coating adds $1.50-$2.50 per linear foot but buys you 5-7 extra years before rust shows at the welds.
Day four is gates and hardware. Single walk gates need 4×4 inch posts minimum; double drive gates for RV or trailer access need 6×6 inch posts with diagonal bracing. We set latches at your preferred height, add drop rods for double gates, and can spec self-closing spring hinges for pool code compliance. This is when you test everything; we adjust swing and latch alignment before we leave.
Final step is walkthrough and documentation. We photograph the completed fence, note post depths and concrete volumes on your invoice, and provide Broward County permit closure documents if your job required inspection. Most residential chain link in Tamarac doesn’t need a final inspection unless it’s over 6 feet or part of a pool barrier, but we handle the paperwork either way.
The Chain Link Fence Options You’ll Actually Choose Between
- Galvanized vs. vinyl-coated mesh: Galvanized runs $8-$12 per linear foot installed and shows surface rust in 8-12 years in Tamarac’s salt-air climate. Vinyl-coated in black, green, or brown runs $11-$16 per foot, hides rust longer, and blends better with landscaping. The coating can be scratched during installation, so we touch up with manufacturer paint.
- 2-inch vs. 1-inch diamond: Standard 2-inch is fine for containment and boundary marking. 1-inch “mini-mesh” costs 20-30% more and is worth it only if you’re keeping in small dogs or need extra climb resistance. Most Tamarac homeowners don’t need it.
- Residential vs. commercial framework: Residential uses 1 5/8 inch line posts and 1 3/8 inch top rail. Commercial bumps to 2 1/2 inch posts and 1 5/8 inch rail, with heavier gauge mesh. For a standard backyard in the Woodlands or Mainlands, residential is adequate. If you’re fencing a corner lot on Commercial Boulevard with heavy wind exposure, commercial posts are worth the upgrade.
- Privacy slats: Wind-loaded slats in your choice of color insert through the mesh for 70-90% visual blockage. They add $3-$5 per linear foot and catch more wind, so we spec closer post spacing. In Tamarac, we see these fail first in tropical storms if the installer didn’t account for wind load.
- Barbed wire or top rail extensions: Residential properties rarely need these, but some Tamarac condo associations spec them for dumpster enclosures or rear utility areas. We install only where permitted; Broward County prohibits barbed wire under 6 feet on residential lots.
What Chain Link Fence Costs in Tamarac, FL
Expect $3,500-$9,000 for a typical residential chain link fence installation in Tamarac. Here’s what moves you within that range:
| Variable | Low-End Impact | High-End Impact |
|---|---|---|
| Linear footage | Under 100 ft | 300+ ft with multiple gates |
| Existing fence removal | None or DIY | Wood or chain link demo + haul-away ($400-$800) |
| Soil/groundwater conditions | Dry, sandy, no obstructions | Standing water, dewatering, rock or debris |
| Material grade | Galvanized 9-gauge, 2-inch mesh | Vinyl-coated 6-gauge, 1-inch mesh, privacy slats |
| Gate count and type | Single walk gate | Double drive gate with automatic opener |
Our written estimates include posts, concrete, mesh, top rail, tension hardware, one walk gate, and standard labor. What’s typically extra: permit fees (Broward County charges vary by municipality), tree or stump removal in the fence line, relocating sprinkler heads or shallow electrical, and automatic gate operators. We flag these during the site visit so you’re not surprised. Call (844) 665-0162 for an exact quote - estimates are free.
What Tamarac Homes Specifically Do to This Job
Tamarac was developed almost entirely between 1963 and the early 1980s as one of Broward County’s first large planned retirement communities. That leaves an unusually dense concentration of aging concrete block structures now cycling through mandatory 40-year building recertification. For chain link fence work, this matters because many of the original single-family homes on streets like Westwood Boulevard and Tamarac Village Boulevard sit on lots with original perimeter fencing that’s 40-50 years old, corroded at the base, and often non-compliant with current pool barrier codes.
The city’s high water table, fed by Everglades drainage, means post holes frequently fill before concrete sets. We pump and pour same-day, or spec longer post lengths to get bearing depth below the water line. After Hurricane Wilma and Irma, we also saw how chain link around older condo complexes failed not from wind but from rotted wooden posts the original installer used instead of steel. When we’re called to replace those, we coordinate with the association’s concurrent concrete restoration or roof work - many boards are juggling multiple projects under Florida’s post-Surfside structural reserve mandates.
HOA rules vary by village. Some Mainlands associations require black vinyl coating to match common-area fencing; others specify maximum height at 4 feet for front yards. We pull the governing documents before we spec anything. Homeowners often pair new fencing with Concrete Driveways & Concrete Work in Tamarac or Asphalt Driveways & Resurfacing in Tamarac to handle the full exterior at once, and our Fence Installation crew coordinates timing with those trades.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Chain Link Fence in Tamarac
Most residential jobs finish in 2-4 business days after permits clear. Broward County typically reviews residential fence permits in 5-10 business days, so plan 2-3 weeks total from signed contract to completion. Call (844) 665-0162 and we’ll check current permit turnaround.
Yes, if the fence exceeds 6 feet in height or encloses a pool. Under 6 feet on a single-family lot, some Tamarac villages don’t require permits, but Broward County’s building department makes the final call based on your property’s zoning. We handle the application and inspection scheduling as part of our scope.
Usually, yes. We route post placement around known sprinkler lines flagged during 811 locates. If a head sits exactly where a terminal post must go, we relocate that single head for $150-$300 rather than redesigning the fence line. We mark everything before we dig.
Yes, typically by 30-50%. Chain link runs $3,500-$9,000 installed where vinyl starts around $3,500-$9,000 for the same footage and aluminum runs $4,000-$10,000. The trade-off is aesthetics and privacy - chain link is visible through, and it doesn’t match every home style. For backyard dog runs and side-yard boundaries where looks matter less, it’s the practical choice.
We warranty our workmanship - post plumb, gate swing, tension - for the period specified in your written contract. The mesh and framework carry manufacturer warranties against defects; galvanized typically 10-12 years structural, vinyl-coated 15-20 years against coating failure. Rust from scratches or physical damage isn’t covered. We document everything at final walkthrough.
Get Your Free Estimate for Chain Link Fence in Tamarac
Call (844) 665-0162 to schedule a site visit. We’ll walk your property, check for utilities and drainage, review any HOA requirements, and email you a detailed estimate within 24 hours. No deposit required to book; work starts when permits clear and you’re ready.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Tamarac since our South Florida founding.