How Much Does Door Installation in Davie Cost, and How Long Does It Take?
Door installation in Davie typically runs $800-$3,200 for a standard replacement and $1,500-$5,500 for new construction or structural modifications, with most single-door projects completed in one to two days. Pre-hung interior doors on existing jambs finish same-day; exterior entry systems with impact-rated glass, sidelights, or frame reconstruction need two to three days including inspection scheduling. Call (844) 665-0162 for a free on-site estimate and written breakdown.
Our Door Installation Process, Start to Finish
We’ve installed doors across Davie’s 1960s ranch neighborhoods near Nova Drive, the equestrian parcels out by SW 136th Avenue, and the newer developments closer to Pine Island Ridge. Each site teaches something different, but our sequence stays consistent so you know what to expect and when you’ll need to make decisions.
Stage 1: Site measure and condition check (Day 1, 45-90 minutes)
We arrive, photograph the existing opening, check for plumb and level, and test for hidden damage. In Davie especially, we probe for termite tracks in older wood frames and check whether the concrete block surround has shifted with seasonal groundwater changes. You’ll decide here whether to keep the existing jamb or replace it entirely, and whether you want the door to swing left or right. That swing direction gets locked into the order immediately.
Stage 2: Product selection and order lock (Day 1-3, depending on stock)
We confirm material, core type, hardware finish, and glass package. Standard fiberglass or steel entry doors from Jeld-Wen or Masonite ship within a week; custom sizing, impact-rated laminated glass, or architectural-grade Marvin or Andersen units run three to six weeks. You’ll sign off on the exact model number and hardware schedule. No substitutions happen without your approval.
Stage 3: Demo and rough-opening prep (Day of install, 2-4 hours)
We protect floors, remove the old unit, and expose the rough opening. Here’s where Davie’s older CBS construction often surprises homeowners: original builders sometimes set doors directly into block with minimal flashing, so we frequently need to cut back stucco, install new pressure-treated bucks, and integrate proper sill pan flashing that wasn’t required pre-1994. If we’re widening the opening or moving the door location, this stage extends to a full day and triggers permit requirements.
Stage 4: Hang, shim, seal, and hardware set (2-6 hours)
The new door goes in level and square, shimmed at hinge points and head, then fastened through the frame into structural backing. We foam-seal the gap, install weatherstripping, and set hardware. For exterior doors in Davie, we pay particular attention to the sill-to-slab seal because that shallow water table can wick moisture upward during summer storms.
Stage 5: Trim, paint touch-up, and walkthrough (1-2 hours)
Interior casing goes on, exterior trim or stucco patch cures, and we operate the door twenty times to confirm smooth closure and proper latch engagement. You sign the completion checklist. If permits were pulled, we schedule the Broward County inspector for the next available slot.
The Door Options You’ll Actually Choose Between
Door installation in Davie isn’t one-size-fits-all. The right spec depends on your home’s age, your wind-mitigation goals, and whether you’re matching existing trim or starting fresh.
- Steel entry doors: The budget workhorse, $800-$1,400 installed. Galvanized skins resist denting better than aluminum, and polyurethane cores insulate reasonably well. Downside: they rust at scratches and edges in salt air, so they need repainting every few years in South Florida. Best for shaded entries and homeowners who don’t mind maintenance.
- Fiberglass entry doors: $1,200-$2,800 installed. Mimics wood grain convincingly, won’t rot or rust, and holds paint longer than steel. We spec these most often for Davie’s ranch homes because they handle direct sun and humidity without the swelling issues that plague solid wood. The higher-end models from Therma-Tru or Jeld-Wen carry 20-year finish warranties.
- Solid wood interior doors: $400-$900 per door installed. Pine or primed MDF for painted applications; oak, maple, or mahogany for stained finishes. Heavier and quieter than hollow-core, but they’ll swell and bind in unconditioned spaces like Davie’s detached garages or barn offices. We recommend engineered stile-and-rail construction over solid slabs for stability.
- Impact-rated exterior systems: $2,500-$5,500 installed. Required by code for new construction in Broward’s High-Velocity Hurricane Zone, and strongly recommended for pre-1994 homes retrofitting for insurance discounts. These include laminated glass, reinforced frames, and multi-point locking. PGT and CGI make the systems we see most in Davie permit files.
- Pre-hung vs. slab-only: Slab replacement on a sound jamb saves $200-$400 in labor, but we only recommend it when the existing frame is plumb, square, and undamaged. In Davie’s older stock, we find compromised jambs more often than not, so pre-hung units end up being the smarter money.
Hardware matters too. A standard bored-lockset runs $40-$120; mortise locksets or smart-lock prep add $150-$400. We typically set Moen or Baldwin hardware on our Davie projects, though we’ll install customer-supplied units if you have a preference.
What Door Installation Costs in Davie, FL
For door installation in Davie, expect to spend between $800 and $5,500 depending on scope. Here’s how that breaks:
| Project Type | Typical Range |
|---|---|
| Interior pre-hung door, standard size | $800-$1,400 |
| Interior pre-hung door, custom size or solid wood | $1,200-$2,200 |
| Exterior steel or fiberglass replacement | $1,500-$3,200 |
| Exterior impact-rated system with sidelights | $3,500-$5,500 |
| New construction opening, block cut and frame | $2,000-$4,500 |
Five variables push you toward the high or low end of these ranges:
- Existing frame condition: Rot, termite damage, or out-of-plumb block adds $400-$1,200 for reframing and stucco repair.
- Size and configuration: Double doors, transoms, or sidelights multiply material and labor. A standard 3/0 x 6/8 single door costs roughly half what a double-door unit runs.
- Structural modifications: Widening an opening in CBS construction means cutting block, installing a steel lintel, and engineering sign-off. Budget $1,500-$3,500 extra.
- Permit and inspection scope: Broward County requires permits for exterior door replacement in wind-borne debris regions; Davie’s equestrian overlay adds a zoning compatibility check if the door serves an agricultural structure. Permit fees run $150-$450.
- Material grade and lead time: Stock fiberglass from a local supplier ships in days. Custom-sized Marvin with factory-applied finish and impact glass ships in six to eight weeks and costs 40-60% more.
Our written estimates include demo, disposal, the door unit, hardware, installation, trim, and basic paint touch-up. They don’t include permit fees (paid directly to the county), extensive stucco or drywall repair beyond the immediate opening, or electrical work if you’re relocating a doorbell or adding smart-lock wiring. We flag those line items separately so you’re not surprised.
What Davie’s Homes and Codes Do to This Job
Davie’s housing stock shapes every door installation we quote here. Much of the town was built between 1960 and 1985, concrete block and stucco ranch homes on generous lots that predate modern wind-mitigation standards. We regularly pull doors from these houses and find original wood frames set directly into block with no sill pan, no flashing tape, and sometimes no shims at all. The door lasted forty years through luck more than engineering.
That shallow water table west of the coastal ridge complicates things too. We’ve opened exterior door sills in Davie neighborhoods near the Orange Bowl Riding Club and found the slab edge damp year-round. Without proper sill pan and sealant detail, new doors rot from the bottom up in five to seven years. We spec composite or composite-capped sills on every exterior install now, even when the manufacturer offers wood as standard.
The permitting path matters here in ways it doesn’t in neighboring cities. For standard residential door replacement, Broward County Building Division handles plan review and inspection. But Davie’s equestrian overlay zones introduce a wrinkle we’ve seen trip up out-of-town contractors: if your door installation is part of renovating a barn, tack room, or agricultural outbuilding, Davie’s Planning and Zoning Division must sign off on equestrian use compatibility before the county will issue the structural permit. We’ve navigated that dual-agency sequence for clients on SW 130th Avenue and near the Davie Ranch. It’s not difficult if you know it exists, but it adds a week to the timeline and requires drawings that show the structure’s relationship to paddocks and manure storage.
Homeowners in Pine Island Ridge or the older sections of Cooper City adjacent to Davie sometimes assume their HOA architectural review replaces the permit process. It doesn’t. HOA approval and county permits run on parallel tracks. We coordinate both so you don’t close out one and discover the other is still pending.
If your door installation is part of a full Windows & Doors in Davie project, our crew sequences the work so you’re not living with a gaping opening overnight. Many homeowners pair exterior door upgrades with Chain Link Fence in Davie or Vinyl Fence in Davie work to complete their property perimeter at the same time. We schedule those trades through one point of contact.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Door Installation in Davie
Most single-door replacements finish in one day; exterior entry systems with impact glass or sidelights need two to three days, plus permit inspection lead time. Call (844) 665-0162 and we’ll confirm your specific timeline after a quick site visit.
Exterior door replacements in Broward County’s wind-borne debris region require a permit; interior door swaps typically don’t. Agricultural structures in Davie’s equestrian overlay need zoning compatibility sign-off before the county issues the structural permit. We handle both applications as part of our project management.
Yes, if you’re keeping the same door location and size. Relocating a door means rerouting any switches, outlets, or HVAC ducts in the wall, which adds $800-$2,500 depending on what’s buried in that cavity. We map that out during the initial measure so you decide with full information.
A pre-hung fiberglass unit in a standard size, using the existing frame if it’s sound, runs $1,200-$1,800 installed. That’s our most common budget-conscious spec for Davie’s ranch homes. It won’t have impact glass or smart-lock prep, but it’ll seal tight and hold paint for fifteen years. Call (844) 665-0162 for an exact quote.
We warranty our labor for one year against installation defects. The door itself carries the manufacturer’s warranty, typically ten to twenty years on fiberglass and steel skins, one year on painted finishes unless you upgrade to a factory-finish option. Hardware warranties vary by brand. We register all warranties in your name and email you the documentation.
Get Your Free Estimate for Door Installation in Davie
We’ll come to your Davie property, measure your openings, check frame condition, and deliver a written estimate with product options at two price tiers. No deposit required to schedule. Call (844) 665-0162 or request a callback through our site. Raymond Estevez and our Windows & Doors crew cover Davie, Broadview Park, Cooper City, and the surrounding Broward County area.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Davie and South Florida.