Fence Repair in Hollywood - Same-Day Service, Done Right the First Time

How Much Does Fence Repair Cost in Hollywood, and How Fast Can It Start?

How We Handle Fence Repair in Hollywood - Start to Finish

We’ve learned that fence repair goes smoother when homeowners know what’s coming and when they need to make a decision. Here’s how we stage it.

Stage 1: On-site assessment and scope lock (Day 1, 45-60 minutes)

We walk the full fence line with you, photograph damage, check post integrity below grade with a probe, and identify whether the failure started at the post, the panel, or the hardware. You’ll decide right then: repair in place, or remove and replace a full section for a cleaner match. We also flag any sprinkler lines or shallow electrical that runs parallel to the fence - common in Hollywood’s older east-side lots where original 1960s irrigation was trenched shallow.

Stage 2: Material match and permitting check (Day 1-2)

We source matching material from our roster - pressure-treated pine, cedar, vinyl, or aluminum - and verify whether your repair triggers a permit. In Hollywood, a like-for-like repair under 25 linear feet usually doesn’t, but any height change, structural post replacement, or relocation onto a property line does. If you’re in a gated community west of Stirling Road, we’ll also check your HOA’s approved style and color list. You approve the material sample and any permit scope before we order.

Stage 3: Demo and prep (Day 2 or 3, 2-4 hours)

We remove damaged sections, extract rotted or corroded posts, and inspect the concrete footing. In Hollywood’s barrier island areas near the Intracoastal, we often find salt-corroded aluminum post bases or galvanized hardware that’s degraded faster than inland. We haul away debris same-day. If we’re working near your home’s electrical feed or pool equipment, we coordinate a brief utility locate - typically cleared in 24 hours in Broward.

Stage 4: Rebuild and hardware install (Day 3 or 4, 4-8 hours)

Posts go in with concrete rated for South Florida’s sandy, well-drained soils - we use a high-strength mix with reduced water content so it sets solid even in our porous ground. Panels attach with HVHZ-compliant fasteners; in Hollywood, that’s non-negotiable. We set gates with three hinges minimum and adjustable self-closing hardware if you have a pool. You do a walk-through with the crew lead before we wrap.

Stage 5: Final inspection and documentation (Day 4 or 5, 30 minutes)

If a permit was pulled, we schedule the Hollywood building inspector. We also email you photos of the completed work, a material receipt, and any warranty registration for vinyl or aluminum components. For seasonal residents who head north for summer, we note this in our file - we’ll coordinate access through your property manager if follow-up is ever needed.

The Repair Choices You’ll Actually Need to Make

Every fence repair in Hollywood forces a few real decisions. Here’s where the money and longevity differ:

• Wood species and treatment level: Pressure-treated pine is the default match for 1970s-1990s Hollywood stock. It’s affordable and takes stain well, but in our humid climate with afternoon thunderstorms half the year, expect 8-12 years before posts soften at grade. Cedar runs 40-60% more, weathers to a silver-gray without staining, and resists rot longer - worth it if you’re keeping the home 10+ years.
• Vinyl panel replacement vs. full-section swap: Matching faded vinyl is nearly impossible; the UV degradation curve is too steep. We usually recommend replacing the full section to the nearest posts for color consistency. Higher-end vinyl with titanium dioxide stabilizers (the grade we source) holds color longer in South Florida sun, but costs more upfront.
• Aluminum gauge and powder coat: For coastal Hollywood homes, especially near the beach or Intracoastal Waterway, we spec .065-inch wall thickness minimum and AAMA 2605 powder coat - the same standard we use on impact window frames. Thinner, lower-grade aluminum corrodes at the base in 4-6 years here. The upgrade pays for itself.
• Post depth and concrete spec: Standard is 24 inches in sandy Broward soil. But if your original fence failed because posts heaved or leaned, we go 30-36 inches with a bell-shaped footing. Adds labor and a bag of concrete per post, but eliminates the callback.
• Gate hardware grade: Residential-grade hinges sag in 18 months on a heavy solid-panel gate. We default to commercial-grade adjustable hinges and magnetic latches for any gate over 42 inches wide - the hardware outlives the panel.

If your damage is extensive enough that repair approaches half the cost of new, we’ll tell you. Sometimes a full Fence Installation in Hollywood is the smarter spend, and we’ll price both paths so you can compare.

What Fence Repair Costs in Hollywood, FL

Most fence repairs we complete in Hollywood fall between $350 and $2,800. Here’s what pushes a job to the low or high end:

Variables that move your number:

• Linear feet affected: Every additional panel adds material plus 30-45 minutes of labor.
• Existing condition below grade: Posts that broke off at ground level are quick. Posts rotted 12 inches down require more excavation and a longer replacement.
• Material availability: Discontinued styles or colors force a full-section swap at a wider scope.
• Permit and inspection: If triggered, add $150-$400 for Broward County permit fees and the inspection scheduling buffer.
• Access difficulty: Fences backing up to canals, tight side yards in east Hollywood’s older duplex lots, or properties with mature banyan roots add labor hours.

Our written estimates include material, labor, haul-away, and permit coordination if needed. They don’t include sprinkler repair, tree or root removal, or HOA re-application fees - those we flag during assessment so you’re not surprised.

What Hollywood’s Conditions Do to Fence Repair

Hollywood sits entirely within Florida’s High Velocity Hurricane Zone, and that changes fence repair in ways contractors from Palm Beach or Orlando often miss. Every structural post replacement, height change, or new installation must use HVHZ-listed assemblies with Miami-Dade Notices of Acceptance - standard Florida Product Approval isn’t enough here. We’ve seen out-of-area crews get stopped cold at the Broward permit desk because their fastener schedule or post-base bracket lacked the right NOA documentation. That kills a schedule by two to three weeks while replacement materials are sourced.

The housing stock matters too. In east Hollywood neighborhoods like those off Hollywood Boulevard and Federal Highway, we’re constantly repairing fences on 1950s-1970s concrete block homes where the original wood fence went in with steel posts set in shallow, undersized footings. The posts rust through at grade; the panels are often still sound. We can save the panels and replace just the posts, but only if we dig deeper and use galvanized or stainless hardware this time. West of Stirling Road, in the 1980s-2000s planned communities, we see more vinyl and aluminum fencing with manufacturer warranties still active - our repair often involves a warranty claim coordination instead of a full out-of-pocket replacement.

For homes near the barrier island or the Intracoastal Waterway, salt-air corrosion accelerates hardware failure by 30-50% compared to inland Broward. We spec 316-grade stainless fasteners in those zones, not standard galvanized. And if your property sits near the Coastal Construction Control Line, any fence relocation or substantial rebuild may need a DEP permit layer that inland projects never see - we check this during our first site visit.

Many of our Hollywood clients are seasonal residents or retirees who value reliability over speed-of-quote. We keep detailed files on repeat clients’ properties, coordinate access through local contacts, and schedule work during their Florida months. It’s the same approach we bring to ADU Design & Permitting in Hollywood and Garage Conversion ADU in Hollywood - projects where trust and continuity matter even more.

Frequently Asked - Fence Repair in Hollywood

Get Your Hollywood Fence Repair Estimate

Call (844) 665-0162 to schedule a free on-site estimate for fence repair in Hollywood. We’ll walk your fence line, photograph the damage, bring material samples for matching, and email you a written quote within 24 hours. No deposit required to schedule. We serve Hollywood and surrounding Broward communities including Andover, Miramar, West Park, and West Hollywood. For full fence replacement or new layout design, our Fence Installation crew handles everything from property survey to final inspection.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Hollywood since our founding in Fort Lauderdale.