What Full Bathroom Remodeling in Pembroke Park Actually Involves
Full bathroom remodeling in Pembroke Park strips the room to the studs, replaces every system, and rebuilds it with modern plumbing, electrical, waterproofing, and finishes. Most jobs we handle in this market run 3 to 5 weeks from permit approval to final inspection, with the actual construction phase typically spanning 10 to 15 working days. For a complete gut renovation, homeowners in Pembroke Park should expect to invest between $9,000 and $28,000 depending on size, material selections, and whether plumbing or walls get relocated. Call (844) 665-0162 and we’ll walk through your specific space and scope on a free on-site estimate.
How We Approach a Full Bathroom Remodel from Start to Finish
We’ve refined our process across hundreds of South Florida bathrooms, and it matters here because Pembroke Park’s older CBS homes often hide surprises once the drywall comes off. Here’s exactly how we sequence the work and what you’ll need to decide at each point.
Stage 1: Site prep and protected demo (Days 1-2)
We seal off the work area with dust barriers and HEPA filtration, then remove everything down to the studs: vanity, tub or shower surround, toilet, flooring, ceiling if needed, and all fixtures. In the 1950s and 1960s concrete block homes common around Pembroke Park, we frequently find original galvanized plumbing, ungrounded electrical, or prior DIY work that failed inspection. We document everything with photos and flag any code issues before proceeding.
Stage 2: Rough-in and structural decisions (Days 3-6)
This is where the permanent infrastructure goes in. You’ll need to confirm your final fixture layout by day 3, because moving a toilet flange even 6 inches means breaking concrete slab, which adds days and cost. We run new PEX or copper supply lines, PVC drains, GFCI-protected electrical circuits, and exhaust ventilation. If you’re expanding the footprint or removing a wall, we bring in our structural crew to verify load paths. This stage also includes the pre-slope for shower pans and any recessed niches or bench framing.
Stage 3: Waterproofing and substrate (Days 7-9)
We apply liquid or sheet membrane waterproofing to shower and tub surrounds, flood-test the pan for 24 hours, and install cement board or equivalent tile backer on walls and floors. In Pembroke Park’s humid coastal climate, we spec mold-resistant backer and premium waterproofing systems, not the basic builder-grade approach. You’ll have already chosen your tile size and pattern by this point, since large-format tiles require flatter substrates and different prep than standard 12-by-12.
Stage 4: Finish installation (Days 10-13)
Tile setters work first, followed by grout and sealant cure time. Then we install the vanity, countertop, plumbing fixtures, lighting, mirror, toilet, and accessories. This is when material quality becomes visible. A KraftMaid or Wellborn vanity cabinet installs with the same precision regardless of price tier, but the door construction, drawer glide rating, and finish warranty differ substantially. We don’t proceed to the next trade until the prior one passes our QC check.
Stage 5: Final inspection and punch (Days 14-15)
Pembroke Park’s building department requires a final plumbing and electrical inspection for any full remodel involving new fixtures or circuits. We schedule this, address any inspector notes, then walk the space with you for the punch list. Our project manager demonstrates every valve, drain, and GFCI reset before we consider the job closed.
The Material and Configuration Choices That Shape Your Bathroom
Full bathroom remodeling means making dozens of decisions. These are the ones that most affect your daily experience and final cost:
- Vanity cabinet construction: Stock particleboard boxes with thermofoil doors start around $400 and work fine in guest baths with light use. Solid plywood boxes with hardwood doors from KraftMaid or Wellborn run $1,200 to $3,500 but survive decades of steam cycles and slammed drawers without delamination.
- Countertop material: Cultured marble is the budget path at $200-$500 installed, but it scratches and stains. Quartz surfaces from Cambria or Silestone run $1,500-$3,500 for a typical double vanity, resist etching from toiletries, and carry 10-year manufacturer warranties. Natural stone requires annual sealing, which many Pembroke Park homeowners skip until damage appears.
- Shower system type: A prefabricated acrylic surround installs in one day and costs $800-$1,500. Custom tile with a linear drain and frameless glass runs $4,000-$9,000 but gives you exact dimensions and a walk-in threshold if aging-in-place matters.
- Tile specification: Porcelain rated PEI 4 or 5 handles residential traffic indefinitely. Natural stone needs sealing every 6-12 months in Florida’s humidity. Large-format tiles (24-by-48 or larger) require perfectly flat walls and cost more to install but reduce grout lines.
- Plumbing fixture grade: Builder-basic chrome faucets last 5-8 years before cartridges fail. Commercial-grade brass bodies with ceramic disc valves from brands like Delta, Moen, or Kohler cost 40% more upfront but rarely need service.
- Exhaust and moisture control: Code minimum is 50 CFM, but we spec 80-110 CFM for master baths over 100 square feet, ducted straight outside (not into the attic). This matters more in Pembroke Park than inland markets because coastal humidity keeps moisture levels elevated year-round.
What Full Bathroom Remodeling Costs in Pembroke Park, FL
Complete bathroom renovations in this market typically fall between $9,000 and $28,000. Here’s what pushes a project toward either end:
| Cost Driver | Low-End Scenario | High-End Scenario |
|---|---|---|
| Square footage | 5′ x 8′ hall bath, fixtures stay put | 10′ x 12′ master, layout reconfigured |
| Plumbing relocation | Existing locations reused | Toilet, shower, or vanity moved, slab cut |
| Material grade | Stock vanity, acrylic surround, basic tile | Custom cabinetry, frameless glass, quartz, designer fixtures |
| Structural or electrical work | Cosmetic update, circuits adequate | Panel upgrade, wall removal, hurricane strapping |
| Permit and inspection scope | Single trade permits | Full structural, plumbing, electrical, energy compliance |
Our written estimates itemize demolition, rough-in, finishes, and fixture allowances separately so you see where money goes. What we don’t include: your selected fixtures if you purchase them directly, permit fees paid to Pembroke Park’s building department (typically $300-$800 for this scope), or repairs to concealed conditions discovered after demo. We flag likely risks during the initial walkthrough, but no contractor can guarantee what sits behind 60-year-old walls.
Call (844) 665-0162 for an exact quote on your space - estimates are free and carry no obligation.
Why Pembroke Park’s Housing Stock Changes How We Build
The residential homes we remodel in Pembroke Park are almost exclusively 1950s and 1960s concrete block construction on slab foundations. That era’s original bathrooms were built with 2-inch cast iron drains, ungrounded 2-wire electrical, and no exhaust ventilation. When we open walls on a full bathroom remodeling project here, we find galvanized supply lines with interior corrosion, original mud-set tile over wire lath that’s bonded directly to block, and occasional unpermitted prior work that complicates permitting.
Because Pembroke Park operates its own building department for such a compact jurisdiction, we pull permits directly through town rather than Broward County. Inspectors here know these older homes well and scrutinize electrical grounding and plumbing venting closely on renovation work. The town’s position in the 150+ mph wind-speed zone also means any window replacement or exterior wall penetration triggers hurricane protection requirements, which can extend scope if your bathroom shares a wall with an exterior elevation.
We’ve also learned to schedule around the June-October rainy season, when the area’s high water table can delay any exterior or ground-level work that connects to the bathroom scope. Homeowners in this ZIP 33008 market often pair a full interior remodel with exterior envelope work, and we coordinate both through our single-source model. Many clients tackling a bathroom overhaul simultaneously address roofing needs through our Roof Repair in Pembroke Park or Roof Replacement & Installation in Pembroke Park crews, since the same permitting cycle and project manager can handle both scopes.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Full Bathroom Remodeling in Pembroke Park
Most projects run 3 to 5 weeks from permit approval to final sign-off, with 10 to 15 working days of actual construction. Delays usually come from material lead times or inspector scheduling, not our crew pace. Call (844) 665-0162 and we’ll give you a realistic timeline based on your specific selections and the current permit queue.
Yes. Any work involving new plumbing fixtures, electrical circuits, or structural changes requires permits through Pembroke Park’s building department. We handle the application, plans, and inspections as part of our standard process. The town’s inspectors are thorough with older homes, so we build extra time into schedules for potential re-inspections.
Absolutely. Keeping the toilet, vanity, and shower in their existing locations typically saves $1,500 to $4,000 and shortens the timeline by several days. We design around your existing slab penetrations whenever the layout works functionally. During your free estimate, we’ll show you both options so you can decide with real numbers.
Our standard full bathroom remodeling estimate covers demolition, disposal, rough plumbing and electrical, waterproofing, tile or surround installation, vanity and countertop, fixtures, lighting, trim, and final cleanup. It does not include your selected fixtures if purchased separately, permit fees, or repairs to concealed conditions. We itemize everything in writing before work begins.
Full bathroom remodeling is a complete project on its own, though it’s also the core scope within a wider Bathroom Remodeling in Pembroke Park engagement if you’re addressing multiple baths. Our Bathroom Remodeling crew handles everything from single-room gut renovations to whole-home fixture upgrades. One contractor manages every phase, so you’re not coordinating separate trades or conflicting schedules.
Ready to Talk Through Your Pembroke Park Bathroom?
We’ll visit your home, measure the space, check existing conditions, and deliver a written estimate with real material options from our 50+ brand portfolio. No pressure, no generic proposals. Call (844) 665-0162 to schedule your free on-site consultation for full bathroom remodeling in Pembroke Park.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Pembroke Park and South Florida.