Impact Windows & Doors in Boca Del Mar - Same-Day Service, Done Right the First Time

Impact Windows & Doors in Boca Del Mar - What the Job Actually Involves

Impact windows and doors in Boca Del Mar replace your existing openings with laminated glass assemblies rated for Palm Beach County’s 170 mph wind-speed design requirements. A typical whole-home project takes 3-5 days of installation after permits clear, which usually runs 2-3 weeks through Palm Beach County’s Building Division. Most homeowners in the 33433 area invest between $8,000 and $25,000 depending on opening count, existing frame condition, and whether you’re upgrading standard windows or adding impact-rated sliding glass doors. Call (844) 665-0162 and we’ll walk your home with you to build a line-item estimate - no charge, no pressure.

Call (844) 665-0162

How We Handle Impact Windows & Doors From First Measurement to Final Inspection

We’ve learned that impact window and door jobs in Boca Del Mar go smoothest when the homeowner knows exactly what’s coming and when they need to make a decision. Here’s how we stage it.

Stage 1: On-Site Survey and Opening Documentation (Day 1, 2-3 hours)

We measure every rough opening, photograph existing conditions, and test for squareness. In Boca Del Mar’s 1970s and 1980s CBS construction, we frequently find out-of-plumb block openings and original aluminum frames set directly in stucco without proper flanges. That matters because it determines whether we can use retrofit frames or need full-frame replacement with stucco repair. You’ll decide at this stage: retrofit (faster, less exterior disruption) or full-frame (better seal, allows opening size changes). We note any rotted wood buck frames or compromised stucco that need addressing before the new units go in.

Stage 2: Product Selection and Permit Submission (Days 2-14)

You’ll choose your impact-rated product line from our available brands - Andersen, Pella, Marvin, Milgard, Jeld-Wen, Simonton, PGT, and CGI - matched to your budget and aesthetic. For Boca Del Mar’s flat-roof, low-profile architecture, we often steer homeowners toward slimmer frame profiles that don’t visually overpower the facade. We handle Palm Beach County permit submission, which is where the jurisdictional split catches less experienced contractors. Boca Del Mar is unincorporated Palm Beach County, not City of Boca Raton, despite the shared 33433 ZIP. We file with the county’s Building Division at the Belle Glade service center, not Boca Raton’s municipal building department. Wrong filing means rejected plans and a 2-3 week reset.

Stage 3: Material Delivery and Site Prep (Day before install, 2-4 hours)

Impact units arrive crated; we stage them in your garage or a protected patio area. We lay interior protection, remove window treatments, and clear work zones. If you’ve opted for full-frame replacement, we saw-cut stucco perimeters at this stage so demolition day moves fast.

Stage 4: Removal and Installation (1-3 days depending on opening count)

We remove existing units, inspect and repair rough openings for water intrusion damage (common in original single-pane aluminum installations), then set, level, and mechanically fasten new impact frames. We use Palm Beach County-approved anchoring patterns for CBS construction - tapcon-type fasteners into block with minimum embedment depths we verify in the field. Impact glass goes in last to minimize handling damage. Each unit gets perimeter sealant rated for movement and UV exposure.

Stage 5: Inspection and Finish (Day after install, 2-3 hours)

Palm Beach County requires a building inspection for impact window and door installations - we coordinate scheduling. Post-pass, we install interior trim or restore existing, touch exterior stucco if full-frame, and clean. You’re left with operating instructions, warranty paperwork, and the permit closure documentation your insurer may want.

The Product Decisions You’ll Make for Impact Windows & Doors

Not all impact-rated products suit every Boca Del Mar home. These are the real choices with honest trade-offs:

• Vinyl-frame impact windows (PGT WinGuard, Simonton StormBreaker Plus): Best thermal performance, lowest maintenance, mid-range cost. The thicker frames suit homes where energy efficiency matters more than slim sightlines. Trade-off: frame depth can reduce glass area slightly versus aluminum.
• Aluminum-frame impact windows (CGI Estate Collection, PGT Architectural): Slimmer profiles, larger glass area, stronger structural capacity for oversized openings. Ideal for Boca Del Mar’s flat-roof homes where you want to preserve horizontal sightlines. Trade-off: conducts heat; needs thermal break for efficiency, which adds cost.
• Laminated glass thickness (5/16″ vs. 7/16″ interlayer): Thinner interlayer meets code for most residential; thicker interlayer adds sound dampening and higher missile-impact rating. Trade-off: weight and cost, roughly 15-20% more for thicker glass. Worth it if you’re on a busier corridor or want quieter interiors.
• Impact sliding glass door systems (2-panel vs. 3-panel, pocket vs. standard): Multi-panel configurations open wider but require structural header verification - critical in 1970s CBS construction where headers may need reinforcement. Trade-off: $2,000-$5,000 more for multi-panel, plus potential engineering if headers are undersized.
• Finishes and hardware: Standard white or bronze interior/exterior versus custom color match. Anodized aluminum finishes hold up better in salt air than painted. Trade-off: 4-6 week lead time and 10-15% upcharge for custom.

Our windows & doors crew will walk you through each choice at your home with actual samples, not a catalog. Windows & Doors is one of seven project categories we handle, so if you’re also considering a roof replacement or exterior update, we coordinate the sequence to avoid redundant scaffolding or stucco repair.

What Impact Windows & Doors Costs in Boca Del Mar, FL

Five factors push your number within these ranges:

1. Opening count and size: Each additional window adds roughly $600-$1,200 installed; oversized picture windows or multi-panel doors multiply that.
2. Retrofit versus full-frame: Full-frame replacement with stucco cutback and repair adds $150-$400 per opening but solves existing water-intrusion paths.
3. Structural modifications: Enlarging an opening, converting a window to a door, or adding a sliding glass door where none existed requires engineered headers and permits - typically $2,000-$5,000 additional.
4. Product tier and glass specification: Moving from entry-level vinyl impact to architectural aluminum with custom finishes can double the material cost per opening.
5. Existing condition surprises: Rotted wood bucks, compromised stucco, or previous leak damage found during demo. We budget a 10% contingency on Boca Del Mar jobs because original 1970s installations often conceal deferred water damage.

Our written estimate itemizes product, labor, permit fees, and projected contingencies. It does not include window treatments, interior painting, or landscaping repair - those are homeowner or separate-contract items we can coordinate if needed. Call (844) 665-0162 for your specific quote.

Why Boca Del Mar’s Specific Conditions Shape Every Impact Window and Door Job

Boca Del Mar’s jurisdictional reality alone changes how this work gets done. Because the community is unincorporated Palm Beach County, every impact window and door permit routes through the county’s Building Division, not Boca Raton’s more familiar municipal process. Contractors who miss this file with the wrong authority, get rejected, and lose weeks. We’ve seen it repeatedly - it’s why we verify jurisdiction at the survey stage, not after submission.

The housing stock matters just as much. These 1970s and 1980s CBS homes were built before Hurricane Andrew rewrote Florida’s wind-load codes. Original single-pane aluminum windows with minimal anchoring are the norm, and many have leaked for years without visible interior damage until the frames come out. We carry replacement wood buck material and stucco patch supplies on every Boca Del Mar job - not as contingency, but as standard expectation.

Palm Beach County’s impact-glazing mandate means any new or replaced window or door must either be impact-rated or have code-compliant shutters. Since most homeowners upgrading from 40-year-old aluminum frames want the permanent solution, impact-rated products are effectively the standard here. The shallow water table (2-4 feet in this area) doesn’t directly affect window work, but it does constrain any associated slab or foundation modification if you’re expanding openings or adding doors - something we flag early if your project scope includes adjacent additions.

Many homeowners pairing exterior updates will also look at Aluminum Fence in Boca Del Mar or Iron Fence in Boca Del Mar to complete the envelope. We schedule these sequentially to minimize site mobilization costs.

Frequently Asked - Impact Windows & Doors in Boca Del Mar

Get Your Boca Del Mar Impact Window and Door Estimate

We’ll walk your home, measure every opening, explain the retrofit versus full-frame choice for your specific walls, and deliver a written estimate with product options across two or three price tiers. No deposit to schedule the survey. Call (844) 665-0162 or request a callback - we cover Boca Del Mar and surrounding Palm Beach County communities from our Fort Lauderdale base.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Boca Del Mar and South Florida homeowners since our founding.