Impact Windows & Doors in Wellington, FL - Cost, Timeline, and What to Expect
Impact windows and doors in Wellington, FL typically run $8,000-$25,000 for a full-home installation, with most projects taking 2-4 weeks from permit approval to final inspection. Call (844) 665-0162 for a free on-site estimate and written quote. We’re Groundwork Construction Co., and we’ve installed impact-rated openings across Wellington’s CBS homes from Laurel Estates to Lakefield West.
How We Handle Impact Windows & Doors From Start to Finish
Every impact window and door job in Wellington follows a five-stage sequence. Here’s what actually happens, and what you’ll need to decide at each point.
Stage 1: On-Site Measure and Product Selection (1-2 hours)
We visit your home with a laser measure and a full sample kit. You’ll decide on frame material (vinyl, aluminum, or fiberglass), impact-glass thickness, and finish color. For Wellington’s post-Andrew code environment, we also verify your existing openings against current Palm Beach County wind-load requirements. Homes built before 1992 often have openings that no longer meet code, which changes the scope. This visit is free and carries no obligation.
Stage 2: Engineering and Permits (1-3 weeks)
We submit stamped engineering drawings to Palm Beach County Building Division. Wellington sits in a High-Velocity Hurricane Zone, so every impact window and door installation requires a permit with wind-borne debris calculations. If you’re in a gated community near The Trace or Brindlewood, we also coordinate HOA architectural review. This stage is mostly waiting on county turnaround, not active work at your home.
Stage 3: Demo and Rough Opening Prep (1-2 days)
Our crew removes existing windows or doors, inspects the rough opening framing, and repairs any water intrusion damage we find. In Wellington’s late-1970s through early-2000s housing stock, we regularly encounter original aluminum frames with corroded fasteners and degraded sill pan flashing. We don’t install over rot. If we find structural repair needs, we pause and quote the fix before proceeding.
Stage 4: Installation and Weather Sealing (2-5 days)
Impact units go in with structural fasteners at engineered intervals, not standard screws. We use foam sealant, flashing tape, and mechanical fasteners to create a continuous water barrier. For larger openings, especially in ranch-style homes off Belvedere Road, we may bring in a crane day. Each unit gets a water-test spray before we move to the next.
Stage 5: Inspection and Final Walkthrough (1 day)
Palm Beach County inspects for code compliance, fastener patterns, and proper labeling. We then walk you through operation, cleaning, and warranty registration. Most manufacturers require online registration within 30 days for full coverage.
Throughout the process, you have one project manager. No handoffs between sales and install crews. That’s the single-source difference.
The Options You’ll Actually Choose Between
- Vinyl frames - Best insulation value and lowest maintenance. The welded corners don’t corrode in Wellington’s humid, salt-adjacent air. Slightly thicker sightlines than aluminum. Ideal for homeowners prioritizing energy bills over slim profiles.
- Aluminum frames - Slimmer frames mean more glass and better views. Requires a thermal break to prevent condensation in Florida’s climate. Costs 15-25% more than vinyl for comparable impact ratings. Suits modern or transitional homes where frame visibility matters.
- Fiberglass frames - Paintable, extremely stable, and the longest lifespan. Highest upfront cost, often 30-40% above vinyl. Best for custom colors or homes where you’re matching existing trim exactly.
- Laminated glass thickness - Standard impact glass uses a 0.090-inch interlayer. Upgrading to 0.150-inch improves sound dampening, which matters if you’re near Southern Boulevard traffic or the Wellington Aero Club flight path. The cost difference is roughly 8-12% per unit.
- Operating style - Single-hung, horizontal roller, or casement for windows; sliding or hinged for doors. Casements seal tighter in wind but cost more and require clearance to swing. Rollers are the practical default for most Wellington homes.
We carry multiple product lines across these categories so you’re not locked into one manufacturer’s convenience. You choose the spec; we handle the build.
What Impact Windows & Doors Costs in Wellington, FL
| Project Scope | Typical Range |
|---|---|
| Full-home impact window replacement (15-20 openings) | $8,000-$25,000 |
| Partial replacement (5-8 openings, front elevation only) | $4,500-$12,000 |
| Single impact door (front or patio) | $2,500-$6,500 |
| Large sliding glass door replacement | $3,500-$9,000 |
Five variables push your number up or down:
- Opening count and size - More openings and larger dimensions mean more material and labor. A home in Manchester Greens with twenty standard windows sits at the high end of the range.
- Existing frame condition - Rotten sill plates, corroded fasteners, or failed stucco returns add repair hours. We find this in roughly 30% of pre-1990 Wellington homes.
- Structural modifications - Widening an opening or converting a window to a door requires a beam calculation and extended permit review. This adds $1,500-$4,000.
- Product tier - Entry-level impact vinyl from a solid manufacturer versus architectural-grade fiberglass with custom finishes can double the material cost per opening.
- Permit and inspection complexity - Palm Beach County’s HVHZ requirements mean more inspection visits than inland Florida counties. Permit fees and engineering are included in our estimates, but they’re a real cost driver.
A written estimate from Groundwork includes measurements, product specs, permit fees, installation labor, and debris removal. It does not include interior trim painting or exterior stucco repair beyond the immediate opening perimeter. Call (844) 665-0162 for your specific quote.
What Wellington Homes Specifically Do to This Job
Wellington’s housing stock is remarkably uniform: concrete block stucco homes built from the late 1970s through the early 2000s, many with original aluminum-framed windows that predate modern impact standards. In neighborhoods like Sugar Pond Manor and Berkshire Park, we see the same failure patterns repeatedly. The original aluminum frames corrode at the weep holes and sill angles. Stucco returns crack from thermal cycling. And the single-pane glass offers zero protection against wind-borne debris.
The local water table complicates ground-level work too. Any new door installation that alters the threshold height must account for drainage or you’ll get water intrusion during summer storms. We’ve also worked in the Aero Club community, where hangar-adjacent homes need impact-rated openings that coordinate with oversized door headers and county aviation zoning. That’s not a scenario a contractor from Greenacres encounters.
HOA architectural committees in gated communities near Paddock Park or Brindlewood often require color and style pre-approval. We submit on your behalf and build that timeline into our schedule. Post-Hurricane Andrew codes mean every installation gets inspected for proper fastening patterns and labeled glass. No shortcuts pass in Palm Beach County.
If you’re considering impact windows and doors as part of a full exterior update, see our complete Windows & Doors in Wellington page for the broader scope. Our Windows & Doors crew also handles non-impact replacements and new construction installations across South Florida.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Impact Windows & Doors in Wellington
Most projects take 2-4 weeks of active work after permits are issued, with permit processing adding 1-3 weeks beforehand. Homes with 15-20 openings and no structural surprises finish on the shorter end. Call (844) 665-0162 and we’ll give you a timeline based on your specific opening count.
Yes. Palm Beach County requires permits for all window and door replacements in the High-Velocity Hurricane Zone, with engineered drawings showing wind-load compliance. We handle the application, submission, and inspection scheduling. The permit fee is included in your written estimate.
In most cases, yes. Standard replacement within existing openings doesn’t touch plumbing or electrical. Problems arise only when you’re enlarging an opening, converting a window to a door, or relocating a unit. We’ll flag any structural or utility conflicts during the initial measure.
Impact-rated units typically cost 40-60% more than non-impact equivalents for the same frame material and size. In Wellington’s HVHZ, however, non-impact openings require additional hurricane shutters to meet code, which narrows the effective gap. Impact glass also reduces insurance premiums, which many homeowners factor into the decision.
Manufacturer warranties vary by brand and tier, typically covering glass seal failure and frame defects for 10-20 years. Installation workmanship is warranted separately by Groundwork. We register your products and provide both warranty documents at final walkthrough. Keep them with your home records for resale.
Many Wellington homeowners pair exterior upgrades with property-line work. If you’re considering perimeter improvements, we also install Aluminum Fence in Wellington and Iron Fence in Wellington as part of our full exterior envelope service. We cover Wellington and surrounding areas including Royal Palm Beach and Loxahatchee.
Get Your Free Estimate for Impact Windows & Doors in Wellington
Call (844) 665-0162 to schedule a free on-site measure. We’ll bring samples, check your existing openings, and email a written estimate within 48 hours. No deposit required to book. Raymond Estevez and the Groundwork team handle every phase, from permit to final inspection.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Wellington since our South Florida launch.