Paver Driveways in Andover, FL: Cost, Timeline, and What to Expect
Paver driveway installation in Andover typically runs $7,000-$18,000 for a standard residential project and takes 3-5 days from excavation to final compaction. We handle permitting through Broward County, source HVHZ-compliant materials where the driveway ties into covered structures, and schedule around South Florida’s wet season to protect the base work. Call (844) 665-0162 for a free on-site estimate and we’ll walk your specific site conditions.
How We Build a Paver Driveway in Andover - Stage by Stage
Every paver driveway we install follows a five-stage sequence. Homeowners know exactly where we are each day and what decision points are coming.
Stage 1: Site evaluation and utility markout (Day 1, 2-4 hours)
We walk the driveway footprint with you, identify sprinkler lines, shallow electrical runs, and drainage tie-ins that need protection or relocation. In Andover’s 33023 area, we regularly find original 1960s irrigation systems running directly beneath old concrete or asphalt driveways - these need hand-digging exposure before any machine work starts. You’ll decide at this stage whether to relocate sprinkler heads, add a French drain connection, or keep the existing drainage path. We call 811 for official utility marking and photograph everything before breaking ground.
Stage 2: Demolition and excavation (Day 1-2, 4-8 hours)
Old concrete, asphalt, or previous paver installations come out with a mini-excavator where access allows, or by hand in tight Andover lots where fence clearances are under 8 feet. We excavate 8-10 inches below finish grade for the full paver system: 4-6 inches of compacted limestone base, 1 inch of bedding sand, and the pavers themselves at 2-3/8 inch thickness. The soil here is sandy with a high water table - we often hit saturated sand at 18-24 inches, so we adjust base depth and add geotextile fabric to prevent pumping. You’ll confirm the final driveway dimensions and any radius or border details before we set grades.
Stage 3: Base installation and compaction (Day 2-3, 3-5 hours)
We bring in #57 limestone or recycled concrete aggregate and compact in 2-inch lifts with a plate compactor or vibratory roller, depending on driveway width. Each lift gets moisture-conditioned to optimal compaction density. For Andover’s flat terrain and frequent heavy rains, we establish a minimum 1 percent slope away from the house - sometimes 1.5 percent where we need to shed water toward street drains. We check compaction with a nuclear density gauge on larger jobs. Your decision here: whether to add a permeable base system (open-graded stone with no fines) if you’re in a flood-prone section of 33023 or want to minimize runoff.
Stage 4: Edge restraint, bedding sand, and paver laying (Day 3-4, 6-10 hours)
We install concrete edge restraints on the compacted base, spike them at 12-inch centers, and screed 1 inch of coarse bedding sand. Pavers go down in your chosen pattern - herringbone for the best interlock and load distribution, running bond for a cleaner visual, or basket-weave for traditional homes. We cut border pieces with a wet saw, never a dry blade that chips the surface. In Andover, we see a lot of ranch and mid-century modern architecture; Belgard’s Holland Stone or Unilock’s Brussels Block tend to complement those lines without looking pasted-on. You’ll walk the layout before we cut the final border pieces - this is your last chance to adjust.
Stage 5: Compaction, joint sand, and final cleanup (Day 4-5, 2-3 hours)
We vibrate the finished surface with a plate compactor fitted with a urethane mat, sweep in polymeric sand to lock the joints, and blow off the residue. The polymeric sand activates with a light water mist - we time this carefully during Andover’s afternoon thunderstorms, never in direct rain that washes the polymers out prematurely. We leave you with care instructions and schedule any follow-up joint sanding after 30 days of settling. The driveway is drivable immediately; the polymeric sand cures fully in 24 hours.
The Paver Options You’ll Actually Choose Between
- Concrete pavers (standard grade, 2-3/8 inch): The workhorse choice. Pressed concrete in dozens of shapes and colors, typically $7,000-$11,000 for a standard Andover driveway. Holds up well but can fade slightly over 8-10 years in South Florida’s UV. Best for homeowners who want pattern variety without premium cost. We stock Belgard and Tremron lines with local inventory.
- Tumbled concrete pavers (textured, aged appearance): Same material as standard but mechanically tumbled for rounded edges and a softer profile. Runs 15-25 percent more. Suits 1950s-1970s Andover ranch homes where crisp modern edges fight the architecture. Unilock’s Brussels Block and Techo-Bloc’s Villagio are common picks here.
- Permeable pavers (open-graded system): Larger joints, no fine sand, water drains straight through to a stone reservoir below. Adds $2,000-$4,000 to a typical job but eliminates puddling and may reduce stormwater fees in some Broward jurisdictions. Critical for Andover properties with poor natural drainage or where the driveway sits lower than the street grade.
- Clay brick pavers (genuine fired clay): The premium option at $12,000-$18,000+. Color is through-body, so wear doesn’t expose a different core. Heavier and more labor-intensive to install. We source these less frequently for Andover driveways because the cost jump rarely matches the functional return, but they work beautifully for historic restoration or when matching original 1960s clay paving.
- Border and inlay detailing: A soldier course (contrasting border) adds $800-$2,000 depending on linear feet. Inlays, address numbers, or compass roses are quoted separately. Most Andover homeowners skip these on initial install and add them later - the base system accommodates retrofits if you change your mind.
What Paver Driveways Cost in Andover, FL
| Cost Factor | Low-Range Scenario | High-Range Scenario |
|---|---|---|
| Base job (1,000 sq ft, standard concrete pavers, good access, no existing demo complications) | $7,000 | $9,500 |
| Existing driveway removal (thick concrete, reinforced, or tight access requiring hand work) | + $800 | + $2,500 |
| Drainage upgrade (French drain, catch basin, or storm tie-in) | + $1,200 | + $3,500 |
| Permeable base system and pavers | + $2,000 | + $4,000 |
| Premium material upgrade (clay brick or large-format tumbled) | + $2,500 | + $5,500 |
| Irrigation or utility relocation | + $400 | + $1,800 |
The $7,000-$18,000 range for paver driveways in Andover moves on five variables: square footage (the biggest driver), existing material thickness and access for removal, whether we need to relocate utilities or add drainage, paver grade and pattern complexity, and whether Broward County requires a formal permit with engineered plans. Most Andover driveways we build fall in the $8,500-$13,000 range.
What’s included in our written estimate: all materials, base stone, bedding sand, edge restraints, polymeric sand, equipment, labor, and debris haul-off. What’s typically separate: permit fees (varies by project scope in Broward), irrigation repair beyond the driveway footprint, and any electrical work for lighting or gate operators you add later. We itemize these so you’re not surprised.
Call (844) 665-0162 and we’ll measure your specific driveway, check access, and give you a fixed-price proposal - estimates are free.
What Andover’s Conditions Mean for Your Paver Driveway
Andover sits within ZIP 33023 in Broward County - one of Florida’s High-Velocity Hurricane Zone jurisdictions - and that status shapes every construction decision, even below-grade work like driveways. While the HVHZ product-approval requirements most visibly govern roofing and window installations, the same strict inspection culture extends to any project that pulls a permit, including driveway replacements that tie into covered structures or alter site drainage. We’ve seen Broward County inspectors flag inadequate slope on driveway replacements that direct water toward the foundation, requiring rework before final approval.
The neighborhood’s concentration of 1950s-1970s concrete block homes means we routinely work on properties with original slab foundations, aging flat roofs, and no modern hurricane strapping. These legacy structures often have shallow utility runs and original site grading that doesn’t meet current code. When we excavate for a paver driveway in Andover, we frequently find the existing concrete was poured directly on sandy soil with no proper base - it lasted 40 years through sheer mass, but it explains the cracking and settlement patterns homeowners call us about.
South Broward’s 60-65 inches of annual rainfall, concentrated in a June-October wet season, means drainage planning isn’t optional. The water table sits 2-5 feet below grade across much of 33023, so any excavation deeper than our standard 8-10 inches risks hitting saturated sand that compromises compaction. We plan our Andover paver driveway jobs with weather windows in mind, and we never pour base material into standing water. Homeowners often pair a driveway upgrade with larger exterior work - Driveway & Pavers in Andover covers the full scope, and many clients coordinate with our Driveway & Pavers crew to sequence fencing, roofing, or window work while we’re already mobilized on site.
Because Andover is part of our core Andover service area, we know the specific inspection routes and which Broward County field offices handle 33023 permits. That familiarity saves days on the schedule compared to out-of-county crews who file in the wrong jurisdiction or source materials without the local product approvals inspectors expect.
Homeowners expanding their footprint sometimes combine driveway work with accessory dwelling unit planning - we also handle ADU Design & Permitting in Andover and Garage Conversion ADU in Andover for clients who want to add rental income or multi-generational space while we’re already improving the property’s hardscape.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Paver Driveways in Andover
Most paver driveways in Andover take 3-5 days from start to finish, assuming standard access and no utility conflicts. Weather is the main variable - we avoid base work during forecast heavy rain, and Broward’s afternoon thunderstorms in summer can push compaction stages to the following morning. Call (844) 665-0162 and we’ll check the 10-day forecast before we schedule your start date.
A standalone paver driveway replacement on the same footprint typically does not require a building permit in Broward County, but any work that alters drainage patterns, adds impervious surface area, or connects to a covered structure may trigger a site development or building permit. We verify your specific property’s requirements during the estimate and handle all filing if a permit is needed - inspectors will check slope, edge restraint, and base compaction on permitted jobs.
We can often work around sprinkler heads at the driveway perimeter, but any lines running through the driveway footprint must be relocated or sleeved before excavation. In Andover’s older homes, we regularly find original PVC irrigation at shallow depth directly under old concrete - we expose these by hand, mark them, and either reroute or protect them with rigid conduit. You’ll decide whether to cap and abandon old zones or rebuild them; we coordinate with your irrigation company if you want to keep that relationship separate.
Spot repairs to cracked concrete typically cost $400-$1,800, but they don’t address the underlying base failure that caused the cracking. If your Andover driveway has multiple crack patterns, settled sections, or drainage issues, replacement with pavers is the better long-term investment - pavers allow individual unit replacement if settlement occurs, and the segmented surface handles South Florida’s sandy, shifting soils better than monolithic concrete. We assess both options on-site and give you honest numbers for each path.
Our paver driveway installations carry a workmanship warranty covering base failure, edge restraint separation, and joint sand loss within the first year. Manufacturer warranties on the pavers themselves vary by product line - typically 25 years for structural integrity on premium concrete pavers, with color warranties ranging from 5 years to lifetime depending on the specific line and finish. We register manufacturer warranties in your name and provide documentation at completion. Call (844) 665-0162 for the exact warranty terms on the materials you’re considering.
Get Your Andover Paver Driveway Estimate
We’ll walk your driveway, check access and drainage, and deliver a fixed-price proposal within 48 hours. No deposit required to schedule. Call (844) 665-0162 or request your free estimate for paver driveways in Andover - Raymond Estevez and our team will handle every phase from permit check to final compaction.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Andover and South Florida homeowners since our founding.