Tub-to-Shower Conversion in Kings Point: Scope, Timeline, and Cost
A tub-to-shower conversion in Kings Point replaces your existing bathtub with a purpose-built shower enclosure, typically finished in 5 to 10 working days depending on association scheduling and whether plumbing stays in place. Most projects we handle here run between $3,500 and $10,000. Call (844) 665-0162 to schedule a free on-site estimate, and we’ll walk your unit with you to pinpoint exactly where your job falls in that range.
How We Handle a Tub-to-Shower Conversion Start to Finish
We’ve learned that Kings Point homeowners want to know what happens on their property and when, especially given the community’s strict scheduling and notification rules. Here’s how we break it down.
Stage 1: In-Home Assessment and Association Paperwork (2-5 days before demo)
We measure your existing tub footprint, check the condition of galvanized or early CPVC supply lines common in 1970s Kings Point builds, and confirm drain location and venting. You’ll decide at this stage whether you’re keeping plumbing in place or relocating the drain and valve wall. We then compile the association permit package, including neighbor notification letters, insurance certificates, and our proposed quiet-hours schedule. Kings Point’s management office reviews everything before we book the first workday.
Stage 2: Demolition and Rough Inspection (1-2 days)
We remove the tub, surround, and any water-damaged substrate behind it. In Kings Point condos, we often find original drywall or green board behind fiberglass surrounds, sometimes with moisture intrusion from decades of splash-over on flat-sill thresholds. If your subfloor needs reinforcement for a curbless or low-threshold design, we flag it now. A county plumbing inspector visits to approve exposed drain and supply lines before we close walls.
Stage 3: Plumbing Rough-In and Framing (1-2 days)
If you’re staying with existing plumbing, this stage moves fast. If we’re moving the drain from center to linear, or shifting the valve wall to accommodate a wider enclosure, this is where licensed plumbers reroute lines. We also frame in any niches, bench seats, or grab-bar blocking you’ve selected. You’ll confirm final tile layout and fixture placement before we proceed, since changes after waterproofing are costly.
Stage 4: Waterproofing, Tile, and Fixture Set (2-4 days)
We apply liquid or sheet membrane to ANSI A118.10 standards, then set your selected wall and floor tile. Grout cures 24 hours before we seal it. The glass enclosure gets templated now if you’re doing frameless or semi-frameless, though actual installation waits for final cleanup. Your shower valve, trim, and any body sprays or hand showers get connected and pressure-tested.
Stage 5: Glass, Final Inspection, and Walkthrough (1 day)
We install the enclosure, apply final silicone, and run through operation with you. In Kings Point, the association may conduct a final walkthrough to confirm common-area protection and debris removal. We leave you with care instructions, manufacturer warranties for tile and fixtures, and our workmanship guarantee.
The Options You’ll Choose Between for Your Conversion
Every decision below moves your final number and your daily experience. We don’t push one path; we explain the trade-off.
- Keep existing plumbing vs. relocate: Staying put saves $800-$2,500 and a day of work. Moving the drain to a linear trench or shifting the valve wall opens layout possibilities but requires permit-triggering plumbing changes and extends timeline by 2-3 days.
- Curbed threshold vs. curbless entry: A traditional 4-6 inch curb contains water reliably and costs less. Curbless requires floor recessing or slope restructuring, adding $1,200-$3,000, but it’s the right call for aging-in-place plans common among Kings Point residents.
- Acrylic surround vs. tile: Acrylic installs in hours, costs $800-$1,500 for walls, and carries 10-15 year warranties. Tile runs $2,000-$5,000 for materials and labor but offers design flexibility and 30+ year durability. In Kings Point’s humid climate, we specify mold-resistant grouts and recommend annual resealing for natural stone.
- Standard valve vs. thermostatic pressure balance: A basic pressure-balance valve prevents scalding and costs $150-$300. Thermostatic controls hold temperature within 1 degree regardless of toilet flushes elsewhere in the building, running $400-$900. Worth it in multi-unit buildings with shared supply lines.
- Framed vs. frameless glass: Framed sliding doors at $600-$1,200 seal well and suit compact spaces. Frameless panels at $1,500-$3,500 open the visual space but require precise wall plumbness, something we verify early in 1970s construction where settling is common.
What Tub-to-Shower Conversion Costs in Kings Point, FL
| Project Element | Typical Range |
|---|---|
| Basic conversion (plumbing in place, acrylic surround, standard fixtures) | $3,500-$5,500 |
| Mid-range (tile walls, relocated drain, glass door, upgraded valve) | $5,500-$8,000 |
| Full reconfiguration (curbless entry, linear drain, bench, frameless glass, thermostatic controls) | $8,000-$10,000 |
Five variables push you toward the high or low end. First, existing plumbing condition: original galvanized lines in Kings Point’s 1970s stock often require replacement once exposed, adding $600-$1,800. Second, drain relocation: moving from center-drain tub to linear or offset shower drain means permit-triggered plumbing work. Third, wall condition behind the tub: moisture-damaged studs or missing cement board demand repair before waterproofing. Fourth, material grade: porcelain tile vs. ceramic, thermostatic vs. standard valve, framed vs. frameless glass. Fifth, association scheduling constraints: limited work-hour windows and neighbor notification delays can extend labor days.
Our written estimate itemizes demolition, plumbing, waterproofing, tile or surround installation, fixture supply and set, glass enclosure, permit fees, and final cleanup. It does not include bathroom vanity replacement, electrical work beyond a basic exhaust fan, or repairs to common building elements outside your unit boundary. If your project is part of a full Bathroom Remodeling in Kings Point scope, we bundle pricing across all trades.
What Kings Point Homes Specifically Do to This Job
Kings Point’s housing stock shapes nearly every tub-to-shower conversion we perform here. The community’s concrete-block stucco condos and villas, built overwhelmingly between 1972 and 1983, carry plumbing systems now two to four decades past original design life. We regularly open walls to find galvanized supply lines with interior corrosion reducing flow, or early CPVC that has become brittle. Neither material meets current Palm Beach County plumbing code for new work, so replacement becomes necessary once disturbed.
The condo association structure adds procedural time no single-family contractor anticipates. Every project requires written neighbor notification to adjacent units, defined quiet-hours scheduling, and proof of insurance naming the association. We’ve seen contractors lose Kings Point jobs because they submitted incomplete permit packages or tried to start demo before association approval. Our Kings Point process builds in that lead time from day one.
Climate matters too. Palm Beach County’s summer humidity and flat-roof construction mean moisture management inside the unit is critical. We specify cement-board or fiber-cement backer rather than moisture-sensitive substrates, and we verify exhaust fan capacity meets current airflow standards. For homeowners also addressing exterior envelope concerns, we often coordinate with our Metal Roofing in Kings Point or Tile Roofing in Kings Point crews when a full property assessment reveals concurrent needs.
Finally, shared walls mean noise and vibration travel. We schedule cutting and hammering within association-permitted windows, protect common hallways, and coordinate with adjacent residents who are themselves often home during the day. A tub-to-shower conversion in Delray Beach proper might finish in 4 working days; in Kings Point, the same scope typically needs 6 to 10 to accommodate these constraints.
Serving Kings Point, FL - Our Local Coverage Area
We’re based in the Kings Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Tub-to-Shower Conversion in Kings Point
Most conversions take 5 to 10 working days once association approval is in hand, with the variance driven by whether plumbing stays in place and how quickly Palm Beach County inspectors can visit. Call (844) 665-0162 and we’ll check current county inspection lead times for your specific project.
Yes, Palm Beach County requires a plumbing permit for any drain or supply line work, and the Kings Point association requires its own approval package before work begins. We handle both submissions as part of our standard process.
Absolutely, if your existing drain location and valve wall work for your desired shower layout. Keeping plumbing in place saves roughly $800-$2,500 and avoids additional inspection cycles. We’ll confirm feasibility during your free on-site estimate.
$3,500 covers a straightforward conversion with plumbing in place, an acrylic surround, standard valve, and framed glass door. That assumes no hidden moisture damage and no association-mandated upgrades. Call (844) 665-0162 for an exact quote, estimates are free.
We warranty our waterproofing and tile installation workmanship, while fixtures, glass, and acrylic carries the manufacturer’s own coverage, brands like Moen, Delta, or Kohler typically offer lifetime to 10-year limited warranties. We register all products in your name so coverage transfers directly to you.
Ready to Replace Your Tub with a Shower Built to Spec?
We’ll walk your Kings Point unit, check your existing plumbing condition, and deliver a written estimate with line-item pricing for every stage of your tub-to-shower conversion. Call Groundwork Construction Co. at (844) 665-0162 to schedule your free on-site consultation. Our Bathroom Remodeling crew serves Kings Point and surrounding Palm Beach County communities.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Kings Point and South Florida homeowners since our founding.