Walk-In Showers & Shower Remodeling in Andover, FL - Scope, Timeline & Cost
Walk-in showers & shower remodeling in Andover typically runs $4,500-$12,000 for a full installation, or $3,000-$8,500 for a shower replacement, with most projects completing in 5 to 10 business days. Call (844) 665-0162 and we’ll schedule a free on-site estimate to measure your space, check your existing plumbing condition, and deliver an itemized quote before any work starts.
The 33023 ZIP sits in Broward County’s High-Velocity Hurricane Zone, where even interior remodels can trigger code-compliance questions if you’re touching walls that share structural loads or exterior-facing plumbing. Our crew handles that permitting layer as part of the project, not as an afterthought.
How We Approach Walk-In Showers & Shower Remodeling - Start to Finish
We’ve refined our process across hundreds of South Florida bathrooms. Here’s what actually happens, and when you’ll need to make decisions.
Day 1: Site measure and structural assessment. We arrive with a laser measure and moisture meter. In Andover’s 1950s-1970s CBS homes, we’re checking for the original cast-iron or galvanized plumbing that predates modern PVC standards, plus any signs of slab moisture intrusion common to this low water-table area. You’ll decide now on rough layout: keep the drain where it is, or relocate? Keeping it saves $800-$2,000 and two days.
Day 2-3: Demo and substrate prep. We remove the existing surround, pan, and any water-damaged backer board. In older Andover homes, we often find original mud-set tile on wire lath - heavier and more labor-intensive to remove than modern direct-to-stud installations. If your project is part of a full bathroom remodeling in Andover, we coordinate demolition timing with the broader schedule so you’re not living without a toilet longer than necessary.
Day 4-5: Plumbing rough-in and pan installation. This is where the critical path lives. We set the preslope, liner, and final slope for a traditional mortar-bed pan, or we drop in a manufactured foam pan if you’ve chosen that route. You’ll confirm fixture locations now - valve height, handheld or fixed head, niche placement. Changes after this point mean reopening walls.
Day 6-8: Waterproofing and tile or panel installation. We use liquid-applied or sheet membrane systems depending on your wall substrate. In Andover’s humid climate, we pay particular attention to curb-less designs where water migration risk is highest. Your tile or solid-surface panels go up; grout or sealant cures overnight.
Day 9-10: Fixture set, glass, and final inspection. We install your valve trim, showerhead, and any accessories. If you’ve opted for a frameless glass enclosure, we template and order after tile completion - typically a 10-14 day lead time for fabrication. Final walkthrough with you, then we pull the permit closure if your job required one.
The Material and Configuration Choices You’ll Face
Walk-in showers & shower remodeling in Andover isn’t one-size-fits-all. These are the real decisions that move your price and your daily experience:
- Shower pan: mortar bed vs. manufactured foam. Mortar beds with PVC liners are the traditional standard - bombproof when done right, but heavier and more labor-intensive. Manufactured foam pans (Kohler Choreograph, Wedi, Schluter) install faster and offer consistent slope, but cost 30-40% more in materials. For Andover’s older slabs with minor settling, we often prefer mortar beds for their forgiveness.
- Wall surround: ceramic/porcelain tile, large-format porcelain, or solid surface. Standard ceramic tile runs $8-$18 per square foot installed. Large-format porcelain (24″x48″ or bigger) minimizes grout joints - a real advantage in hard-water South Florida where grout discoloration is ongoing maintenance. Solid surface like Corian or Swanstone eliminates grout entirely but limits your design vocabulary.
- Fixtures: standard valve, thermostatic, or digital. A pressure-balance valve from Moen or Kohler handles most households fine. Thermostatic valves maintain temperature within 1-2 degrees when someone flushes a toilet - worth it in homes with original 1/2″ supply lines common in 33023’s older stock. Digital systems (Kohler DTV+) are luxury-tier and require dedicated electrical rough-in.
- Niche and bench: tiled, solid surface, or prefab. Tiled niches match your surround but need precise waterproofing at seams. Prefab solid-surface niches install faster and carry fewer leak risks. A floating bench in large-format porcelain looks seamless; a fold-down teak seat saves space in 32″-36″ wide showers.
- Glass enclosure: framed, semi-frameless, or frameless. Framed is economical and watertight. Frameless demands precise tile plumbness - in older Andover homes with walls that aren’t perfectly square, we may recommend semi-frameless to avoid costly tile rework or custom glass cutting.
Our bathroom remodeling crew sources from 50+ brands across these categories, so you’re choosing what fits your budget and taste, not accepting whatever’s in our warehouse.
What Walk-In Showers & Shower Remodeling Costs in Andover, FL
| Project Scope | Typical Range |
|---|---|
| Shower replacement (same footprint, standard materials) | $3,000 - $5,500 |
| Walk-in shower installation (new layout, mid-grade finishes) | $6,500 - $9,500 |
| Full walk-in shower with relocation, premium fixtures, frameless glass | $9,500 - $12,000 |
Five factors push you toward the high or low end of these ranges:
Plumbing relocation. Moving drain or supply lines through a concrete slab in Andover adds $800-$2,500 depending on distance and whether we hit post-tension cable. Keeping your existing footprint is the single biggest cost control.
Wall condition behind the surround. We find water-damaged studs or missing backer board in roughly 40% of 1960s-era Andover bathrooms. Repair adds $400-$1,200 and a day.
Fixture grade. A Moen Posi-Temp valve assembly runs $150-$250; a Kohler thermostatic with diverter starts around $600. Multiply by showerheads, handhelds, body sprays.
Tile complexity. Subway tile on a straight stack: efficient. Herringbone mosaic with border accents: 30-50% more labor. Large-format porcelain requires specialized leveling systems and slower installation.
Permit scope. Broward County requires permits for any plumbing relocation or structural modification. Pure fixture swaps sometimes don’t, but we verify before starting. Permit fees and inspection scheduling add $200-$500 to your total.
A written estimate from Groundwork itemizes materials, labor, permit costs, and fixture allowances. It does not include your glass enclosure until we template (we’ll give you a preliminary range), or any surprises we find after demo - though we inspect aggressively upfront to minimize those.
What Andover’s Specific Conditions Mean for Your Shower Project
Andover’s housing stock shapes nearly every walk-in shower & shower remodeling job we take here. The 33023 area is dominated by single-family CBS homes built from the 1950s through the 1970s - many with original terrazzo floors, low-slope roofs, and plumbing that predates modern materials. When we open walls in these homes, we regularly find galvanized supply lines with interior corrosion that reduces flow pressure, or cast-iron drains with bellied sections that hold debris.
The High-Velocity Hurricane Zone designation matters even for interior work. If your shower shares a wall with an exterior wall, or if your remodel touches structural elements, inspectors will verify that any exposed framing meets current wind-load connection standards. We’ve seen out-of-county crews caught off-guard by this - materials they sourced from Central Florida suppliers lacked Miami-Dade or Florida Product Approval numbers required in Broward. Our Andover projects pull from suppliers who know HVHZ requirements.
Water pressure is another local factor. Many 33023 homes still run on original 1/2″ mains with pressure at 40-50 PSI - fine for a standard showerhead, but marginal if you’re dreaming of multiple body sprays or rain heads. We test this during our initial assessment and upsize supply lines where needed.
Finally, the wet season timing. June through October brings 60-65 inches of annual rainfall concentrated into afternoon deluges. We schedule exterior wall penetrations, if any, outside these months when possible, and we protect open framing aggressively when demolition coincides with tropical weather.
Homeowners undertaking broader exterior upgrades often pair shower work with Roof Replacement & Installation in Andover or Metal Roofing in Andover - coordinating permits and inspections through one contractor reduces scheduling friction.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Walk-In Showers & Shower Remodeling in Andover
Most projects finish in 5 to 10 business days, with 2 additional weeks if you’re adding a custom frameless glass enclosure. Call (844) 665-0162 and we’ll confirm your specific timeline after measuring.
Yes, if you’re relocating plumbing, modifying walls, or changing the drain location - which covers most walk-in shower conversions. Broward County requires permits for these changes, and our team handles the application, inspections, and sign-off as part of your project.
Often yes, if the tub drain location works for a shower pan - typically within 6-12 inches of center. We assess this on our first site visit; keeping existing plumbing saves $800-$2,500 and avoids slab cutting in Andover’s concrete foundations.
Water-damaged wall studs or failing galvanized supply lines behind the existing surround. We catch most of this with our moisture meter and access-panel inspection before demo, but hidden damage in 1960s-era homes adds $400-$1,500 when it occurs.
We warranty our waterproofing and installation workmanship. Fixture warranties come direct from manufacturers - Moen and Kohler both offer limited lifetime warranties on most valve bodies to the original purchaser. Your written estimate specifies what’s covered by us versus the manufacturer.
Ready to Start Your Walk-In Shower Project?
Call (844) 665-0162 for a free on-site estimate in Andover. We’ll measure your space, test your water pressure, check your existing plumbing condition, and deliver an itemized quote with no deposit required to schedule. Most Andover homeowners have their new walk-in shower within two to three weeks of signing.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Andover and South Florida.