Walk-In Showers & Shower Remodeling in Coconut Creek, FL
Walk-in showers and shower remodeling in Coconut Creek typically run $4,500-$12,000 for a full installation, or $3,000-$8,500 for a replacement of an existing unit. Most projects take 5 to 10 working days from demo to final inspection, depending on whether your home needs structural prep work. Call (844) 665-0162 and we’ll walk through your exact layout and give you a free written estimate.
How We Approach Walk-In Showers & Shower Remodeling
Every job starts with understanding what we’re actually working with. In Coconut Creek, that means different things depending on whether we’re in a 1990s single-family near Lyons Road or a 1979 Wynmoor Village unit with original cast-iron plumbing stacks.
Stage 1: Site assessment and scope lock (1 day). We measure rough dimensions, photograph existing conditions, and test water pressure and drain flow. If you’re in one of Coconut Creek’s older condo buildings, we’ll also review your association’s alteration agreement and confirm whether the building has completed its SB 4-D structural recertification. Homeowners decide at this stage: keep the existing footprint or move plumbing. Keeping it saves roughly $1,500-$3,500.
Stage 2: Demo and substrate inspection (1-2 days). We remove the old surround, pan, and any damaged wallboard. This is where we find the surprises. In Wynmoor and similar 1970s-era buildings, we regularly encounter concrete spalling behind the wall tile and corroded post-tension cable ends that have wicked moisture through the slab. If structural remediation is needed, we pause and bring in an engineer - no interior permit in Broward County moves forward without it.
Stage 3: Rough plumbing and blocking (1-2 days). New valves, diverter, and drain body go in. If you’ve chosen a linear drain or curbless entry, we set the proper slope during this stage. Homeowners make final fixture selections here: showerhead height, grab bar blocking locations, niche placement. Decisions made after this point become change orders.
Stage 4: Waterproofing and tile/substrate install (2-4 days). We use liquid-applied or sheet membrane systems depending on your wall substrate. For solid-surface panels instead of tile, this stage shortens to a single day. The humidity in Coconut Creek means we never rush cure times.
Stage 5: Fixture set, glass, and final inspection (1 day). Trim kit, door or panel, and sealant. If permits were pulled, Broward County inspects for flood plain compliance and Florida Building Code wind-load requirements on any exterior-facing work. We clean and walk you through operation and cleaning protocols specific to your materials.
The Walk-In Shower Options You’ll Actually Choose Between
- Curbed vs. curbless entry: Curbed is simpler, cheaper by $800-$1,500, and works with standard drains. Curbless needs floor recessing or a ramp system and precise slope engineering. It’s worth it for aging-in-place or if you’re part of a full Bathroom Remodeling in Coconut Creek, but it extends timeline by 1-2 days.
- Tile vs. solid surface walls: Tile gives you pattern and texture flexibility but needs grout maintenance in hard-water Broward County. Solid surface - brands like Swanstone or Kohler Choreograph - installs faster, has no grout lines, and costs 15-25% less on labor. Downside: fewer custom looks.
- Acrylic or fiberglass pan vs. tiled mud set: Acrylic pans are $400-$800 installed, done in a day, and carry manufacturer warranties. Mud-set tile pans run $1,200-$2,500, last longer, and feel more substantial underfoot. In Coconut Creek’s high-humidity environment, we see more pan failures on acrylic units after 8-10 years if the sealant degrades.
- Standard glass enclosure vs. frameless: Framed or semi-frameless runs $800-$1,800. True frameless with 3/8″ tempered glass is $1,800-$3,500. The hardware finish (brushed nickel, matte black, polished chrome) gets locked in at order - lead times vary by 2-4 weeks.
- Plumbing fixture grade: Builder-grade valves and trim ($200-$400 set) work fine for rental properties. For owner-occupied homes, we spec pressure-balancing or thermostatic valves from Moen, Delta, or Grohe - $400-$900 - which handle Broward’s occasional pressure fluctuations without scalding risk.
What Walk-In Showers & Shower Remodeling Costs in Coconut Creek, FL
| Scope | Price Range |
|---|---|
| Shower replacement (same footprint, basic materials) | $3,000-$5,500 |
| Walk-in shower installation (new layout, mid-grade finishes) | $6,500-$9,500 |
| Full walk-in with curbless entry, frameless glass, premium fixtures | $9,500-$12,000 |
| Structural remediation required (spalling, tendon repair) | Add $2,500-$7,000 |
Five variables move your number:
Existing condition. A 1980s condo with concrete spalling and corroded blocking needs engineered repair before tile goes up. That can add $2,500-$7,000 and a week of schedule.
Plumbing relocation. Moving the drain or valve location means opening the slab in single-family homes, or coordinating with the stack in multi-story buildings. Expect $1,500-$3,500.
Material grade. The spread between an acrylic surround with a framed door and a tiled mud-set with frameless glass and thermostatic valve is easily $4,000-$6,000.
Permit scope. Broward County requires permits for any plumbing modification and any wall movement. Simple replacement with like-for-like may not need one, but most walk-in conversions do. Permit and inspection fees run $250-$600.
Access and protection. High-rise units in Wynmoor or similar buildings need elevator reservation, corridor protection, and debris chute coordination. We build this into our estimate - it’s not an afterthought.
Our written estimates include demo, disposal, rough and finish plumbing, waterproofing, wall and pan installation, fixtures, glass, and final cleaning. They do not include permit fees (passed through at cost), structural engineering if required, or any HOA application fees.
What Coconut Creek Homes Specifically Do to This Job
Coconut Creek’s housing stock splits into two eras, and each treats shower remodeling differently. The eastern single-family neighborhoods - built 1990s through 2000s along Royal Palm Boulevard and Sample Road - have conventional slab-on-grade construction with accessible plumbing. These jobs move predictably: demo, rough, finish, inspect.
The western condo corridor is another story entirely. Wynmoor Village and similar 55+ communities from the late 1970s and early 1980s sit on post-tensioned concrete slabs with original galvanized or cast-iron drainage that has exceeded its design life. Our Bathroom Remodeling crew working in Coconut Creek has learned to budget an extra site-assessment day for these buildings. We’ve opened too many showers to find snapped tendon ends and spalled concrete that an owner never knew existed.
Florida’s post-Surfside SB 4-D law means these buildings are now under mandatory structural recertification. If your building hasn’t completed its milestone inspection, your interior remodel permit won’t clear Broward County until it does. We coordinate directly with building management and the engineer of record to sequence our work after structural remediation, not in parallel with it.
The high water table throughout Broward County also limits any below-slab drainage correction. If your shower pan has been leaking into the slab, we design surface drainage solutions rather than excavating. And every window or exterior opening in our scope gets verified for impact rating - Coconut Creek sits in the High-Velocity Hurricane Zone, and the Florida Building Code doesn’t grandfather in non-compliant assemblies.
Homeowners in Wynmoor often pair interior work with exterior envelope projects. If you’re already coordinating contractors for milestone repairs, it’s efficient to bundle. We also handle Roof Replacement & Installation in Coconut Creek and Metal Roofing in Coconut Creek for single-family clients looking to address everything through one accountable team.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Walk-In Showers & Shower Remodeling in Coconut Creek
Most projects finish in 5 to 10 working days. Condos in older buildings like Wynmoor with structural pre-conditions can extend to 2-3 weeks. Call (844) 665-0162 and we’ll give you a schedule based on your specific building.
Yes, if you’re moving plumbing, changing walls, or converting from a tub. Broward County requires permits for these modifications, and your building’s SB 4-D recertification status must be current. We handle the application and inspection scheduling.
Usually, yes. Keeping the existing drain and valve locations saves $1,500-$3,500 and shortens the job by 2-3 days. We design the enclosure and entry around your current rough-in during the assessment.
A tub-to-shower conversion using an acrylic surround and framed door on the existing footprint starts around $3,500. It won’t have the custom look of tile and frameless glass, but it’s functional and warrantied. For an exact quote on your layout, call (844) 665-0162 - estimates are free.
We warranty our installation workmanship. Manufacturer warranties cover fixtures, glass, and acrylic or solid-surface materials - typically 5 years to lifetime depending on the product line you select. We document all warranty registrations before we leave the job.
Get a Free Estimate for Walk-In Showers & Shower Remodeling in Coconut Creek
Call (844) 665-0162 to schedule a free on-site estimate. Raymond Estevez or a senior project lead will walk your space, confirm existing conditions, and deliver a written scope with line-item pricing within 48 hours. No deposit required to book. We serve Coconut Creek and surrounding Broward County communities including Pompano Beach, Margate, North Lauderdale, and Lighthouse Point.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Coconut Creek and South Florida homeowners.