Walk-In Showers & Shower Remodeling in Tequesta - What It Costs and How Long It Takes
Walk-in showers and shower remodeling in Tequesta typically run $9,000-$28,000 for a full reconfiguration with waterproofing, tile, and glass enclosure, and most projects take 10 to 18 working days from demo to final inspection. If you’re keeping the existing footprint and updating finishes only, you’re looking at the lower half of that range and roughly a week on site. Call (844) 665-0162 and we’ll walk your specific space, check what’s behind the walls, and give you a written estimate with line-item pricing.
How We Handle Walk-In Showers & Shower Remodeling from First Measurement to Final Walkthrough
Every walk-in shower project in Tequesta follows five distinct stages. We’ve refined this sequence across hundreds of South Florida bathrooms, and we stick to it because skipping steps is where moisture failures and permit rejections happen.
Stage 1: Site measure and scope lock (Day 1)
We show up with a laser measure, moisture meter, and inspection mirror. We’re checking slab condition, wall plumb, existing plumbing locations, and whether your electrical panel can handle additions like a heated floor or modern exhaust fan. You’ll decide right then: curbed or curbless entry, bench or no bench, niche placement, and whether we’re moving the drain or keeping it where it sits. That same visit, we photograph everything for our permit drawings.
Stage 2: Demolition and substrate assessment (Days 2-3)
We strip to studs and slab. In Tequesta’s 1960s-1980s stock, this is where we often find the surprises: original copper drains corroded at the trap, ungrounded outlets within 3 feet of the shower zone, or a slab that slopes the wrong direction because the original builder didn’t account for the high water table. If we hit any of this, we stop, photograph, and call you same day with options and any price adjustment before we proceed.
Stage 3: Rough plumbing, electrical, and waterproofing (Days 4-8)
Licensed trades run new supply lines (we typically upsize to 3/4-inch feeds for multiple shower heads), set the drain, and rough in any electrical. Then comes the critical layer: liquid-applied or sheet membrane waterproofing, flood-tested for 24 hours minimum. In Tequesta, we use modified thin-set and epoxy grouts rated for salt-air environments because standard formulations degrade faster here.
Stage 4: Tile, fixture set, and glass templating (Days 9-14)
Tile goes up, we grout, then seal. Glass gets field-measured for fabrication - typically 7-10 business days for frameless. You’ll have already chosen between clear, low-iron, or patterned glass; brushed nickel, matte black, or polished chrome hardware; and whether you want a sliding door or pivot hinge. These choices are locked at templating.
Stage 5: Final install, inspection, and walkthrough (Days 15-18)
Glass arrives, we install, caulk, and pressure-test everything. If permits were pulled - and in Tequesta, they almost always are - we coordinate the Village inspector. You walk the space with our lead carpenter, we hand over care instructions, and we’re done.
The Material and Configuration Choices That Drive Your Walk-In Shower’s Look and Longevity
Walk-in showers and shower remodeling in Tequesta aren’t one-size-fits-all. Here’s what you’ll actually pick between, and what each means for your daily use and maintenance:
- Porcelain tile vs. large-format slab: Porcelain runs $8-$25 per square foot installed, comes in endless patterns, and handles Florida humidity well. Large-format slabs (sintered stone or porcelain panels) jump to $35-$70 per square foot but eliminate grout lines entirely - worth it if you’re fighting mold in a steam-heavy household.
- Traditional pan vs. linear drain with curbless entry: A standard 2-inch curb and center drain is simpler, cheaper, and easier to waterproof. Curbless with a linear drain looks seamless and ages-in-place friendly, but requires precise slab grinding or a recessed pan system. Add $1,500-$4,000 for curbless depending on slab conditions.
- Standard glass vs. low-iron frameless: Standard tempered glass has a slight green edge; low-iron is crystal-clear and worth the 20% upcharge in a light, airy Tequesta bathroom. Frameless hardware runs $800-$2,200 depending on door width and hinge type.
- Single shower head vs. full thermostatic system: A single pressure-balanced valve and head is $400-$800 in fixtures. A thermostatic rough-in with hand shower, rain head, and body sprays runs $2,000-$5,000 in plumbing alone and demands a larger water heater or tankless upgrade.
- Standard exhaust vs. humidity-sensing fan with timer: Code minimum is 50 CFM. We spec 80-110 CFM in Tequesta because the salt air already stresses every surface; a humidity-sensing unit runs $200-$400 more but prevents the mold cycles we see in waterfront homes left closed up seasonally.
What Walk-In Showers & Shower Remodeling Costs in Tequesta, FL
| Project Scope | Typical Range |
|---|---|
| Shower replacement, same footprint, mid-grade tile | $3,000-$8,500 |
| Walk-in shower conversion with curb, new plumbing | $4,500-$12,000 |
| Full shower remodeling with reconfiguration, premium finishes | $9,000-$28,000 |
Five factors push you toward the high or low end of walk-in showers and shower remodeling in Tequesta:
Existing condition. A 1970s shower with corroded copper drains, ungrounded electrical, and a slab that needs re-pitching adds $2,000-$5,000 before tile ever goes up. We see this constantly in the original ranch stock off Tequesta Drive and County Line Road.
Plumbing relocation. Moving the drain, supplies, or vent stack means opening walls beyond the shower envelope, sometimes into adjacent closets or bedrooms. Each relocated line adds roughly $800-$1,500.
Material grade. The gap between builder-grade porcelain and imported large-format or natural stone can swing finish costs by $5,000-$10,000 on the same footprint.
Glass enclosure complexity. A simple framed sliding door is $600-$1,200. A frameless return panel with a notched panel around a bench runs $2,500-$4,500.
Permit and inspection scope. The Village of Tequesta requires permits for any plumbing or electrical modification, and their inspectors are thorough. Permit fees are modest - typically $200-$500 - but the inspection schedule adds calendar days, especially if corrections are needed.
A written estimate from us includes demo, disposal, rough and finish plumbing, electrical, waterproofing, tile, grout, sealant, glass, fixtures, and final inspection coordination. It does not include your tile or fixture selection purchases if you buy direct, permit fees paid to the Village, or any structural repair discovered after demo. We flag likely unknowns before we start so you’re not surprised.
What Tequesta’s Homes and Rules Mean for Your Shower Project
Walk-in showers and shower remodeling in Tequesta happen under conditions you won’t find in Jupiter or Palm Beach Gardens, and contractors who don’t know the local landscape create expensive delays.
The Village of Tequesta maintains its own building department, separate from Palm Beach County. That means permits route through Village Hall on Tequesta Drive, not the county office in West Palm, and their inspectors know the local stock intimately - they’ll catch a non-compliant exhaust fan location or an unpermitted previous addition that county might miss. We pull permits here regularly and know the current inspector preferences, which shaves days off the process.
The housing stock matters too. Most Tequesta homes went up between the 1960s and 1980s as CBS ranch or split-level plans. Their bathrooms are typically compact by current standards - 5×8 or 5×10 - with the original shower squeezed into a fiberglass or tile-over-drywall corner. The electrical panels in these homes are often 100-amp Federal Pacific or Zinsco units that won’t safely handle modern bathroom loads. We check this at measurement because a panel upgrade, while not strictly “shower” work, is frequently necessary and is part of our full-scope approach as your Bathroom Remodeling in Tequesta contractor.
Waterfront properties along the Loxahatchee River and Intracoastal present their own layer. Any work that touches exterior walls or adds square footage can trigger FEMA flood-zone review, and the river’s Wild and Scenic status means federal environmental setback rules apply. While a straightforward interior shower remodel rarely crosses into federal territory, we’ve seen cases where a planned bathroom expansion toward the water side required Army Corps of Engineers notification. We know the boundary questions to ask before you commit to a layout change.
Finally, the salt air. Tequesta’s position at the northern Palm Beach County coastline means every metal fixture, fastener, and electrical connection degrades faster than inland. We specify brass or stainless plumbing rough-in, corrosion-resistant hardware, and epoxy grouts as standard - not upgrades - because a shower that fails in five years helps nobody.
Homeowners tackling larger exterior projects often coordinate timing with our other services. If you’re already planning Roof Replacement & Installation in Tequesta or considering Metal Roofing in Tequesta, bundling permits and inspections can streamline both projects. Our Bathroom Remodeling crew works hand-in-hand with our exterior teams when full-envelope upgrades make sense.
We cover Tequesta and the surrounding northern Palm Beach County communities - Jupiter, Hobe Sound, North Palm Beach, and Palm Beach Gardens - with the same single-source accountability.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Walk-In Showers & Shower Remodeling in Tequesta
Most projects run 10 to 18 working days, with finish-only updates at the shorter end and full reconfigurations with custom glass at the longer. The Village of Tequesta’s inspection schedule adds a few calendar days that out-of-area contractors sometimes forget to build in. Call (844) 665-0162 and we’ll give you a realistic timeline for your specific scope.
Yes, if you’re moving plumbing, electrical, or structural walls. The Village of Tequesta requires permits for any of these modifications, and their inspectors verify waterproofing, electrical GFCI protection, and exhaust ventilation. We handle the application, drawings, and inspection scheduling as part of our standard process.
Often yes, if your current drain location works for a curbed entry and you’re satisfied with the supply line positions. Keeping plumbing in place saves $1,500-$3,000 and several days. We’ll tell you honestly at measurement whether your existing layout supports the shower you want, or if relocation is worth the investment.
A same-footprint replacement with mid-grade materials typically lands at $3,000-$8,500. A full reconfiguration with curbless entry, bench, niche, premium tile, and frameless glass pushes toward $15,000-$28,000. The biggest single variable is whether we need to open walls, re-pitch the slab, or upgrade electrical. We itemize everything in our written estimate so you see exactly what drives your number.
We warranty our waterproofing and installation workmanship, and every product we install carries its own manufacturer warranty - typically 10 years to lifetime on tile, 5 years on plumbing fixtures, and lifetime on frameless glass hardware. We register all warranties in your name and leave you with documentation. For specifics on your chosen materials, ask during estimate - we’ll show you the warranty cards before you commit.
Ready to Talk Through Your Tequesta Shower Project?
Call (844) 665-0162 for a free, on-site estimate. Raymond Estevez or a senior member of our team will walk your bathroom, check what’s behind the walls, and deliver a written, line-item proposal within 48 hours. No deposit to schedule, no pressure to decide on the spot - just the specifics you need to move forward with confidence.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Tequesta and northern Palm Beach County.