Walk-In Showers & Shower Remodeling in Weston, FL - Scope, Timeline & Cost
Walk-in showers and shower remodeling in Weston typically runs $4,500-$12,000 for a full installation, or $3,000-$8,500 for a replacement of an existing shower footprint, with most projects wrapping in 7-14 working days. You’ll make your biggest decisions upfront: pan material, wall system, fixture placement, and whether you’re keeping the existing drain location or moving it. For a precise scope and written estimate, call Groundwork Construction Co. at (844) 665-0162.
Weston’s master-planned housing stock - overwhelmingly built between 1990 and 2010 - means we’re working in bathrooms that were designed for the era’s preferences: tub-shower combos, framed glass doors, and builder-grade fiberglass surrounds. Homeowners here aren’t looking for a quick refresh. They’re stripping out dated enclosures and building showers that match how the home is actually used now.
This page covers only walk-in showers and shower remodeling - not full bathroom overhauls. If your project includes relocating walls, replacing the vanity, or retiling the full bath floor, that’s Bathroom Remodeling in Weston, and our crew will scope it accordingly.
How We Handle Walk-In Showers & Shower Remodeling - Start to Finish
We’ve refined this into five clear stages. Each one has a duration, a deliverable, and a decision point for you.
Stage 1: Site measure and scope lock (Day 1)
We photograph and laser-measure the existing shower or tub-shower footprint, test water pressure, and inspect the subfloor and adjacent walls for moisture damage. In Weston, we also pull the village ARB guidelines and confirm whether your project triggers any exterior-facing window or vent modifications that need board approval. You’ll decide here: keep the existing drain and valve locations, or relocate? Moving either adds $800-$2,400 but opens up layout options.
Stage 2: Material selection and order (Days 2-5)
This is where the timeline gets set. A custom-tiled shower with a mud-set pan and niche detailing might need 10-14 days for tile and stone delivery. A solid-surface wall system like Kohler Choreograph or a cultured marble surround can be templated and fabricated in 5-7 days. We order fixtures now - Moen, Kohler, or your preferred line - and confirm finish availability. Brushed nickel and matte black typically ship faster than living finishes or custom powder coats.
Stage 3: Demolition and rough-prep (Days 6-8)
We remove the existing enclosure, pan, and wall surround down to studs, then inspect for rot, termite damage, or prior leaks. In Weston’s 1990s-era homes, we regularly find original fiberglass pans that failed at the drain flange and wetted the subfloor. If we hit structural repair, we pause, photograph, and quote before proceeding. No surprises.
Stage 4: Pan, wall system, and fixture install (Days 9-13)
The pan goes in first - sloped, waterproofed, and flood-tested for 24 hours. Wall panels or tile follow, then valve trim, showerhead, door hardware, and glass. We use surface-applied waterproofing membranes (RedGard or equivalent) on cement board for tile jobs, or direct-to-stud acrylic or solid-surface panels for faster installs. Final plumbing connections and pressure tests happen here.
Stage 5: Finish, cleanup, and walkthrough (Day 14)
Sealant application, glass protection film removal, and a joint walkthrough where we demonstrate valve operation, drain flow rate, and cleaning protocols for your specific material. We leave you with care instructions and digital photos of the waterproofing layer before it was covered.
Our Bathroom Remodeling crew coordinates this entire sequence; if your shower project is part of a wider interior update, we schedule trades so you’re not living with a gutted bath any longer than necessary.
The Options You’ll Choose Between for Your Weston Shower
Every decision below affects price, maintenance, and how the shower ages in South Florida’s humidity.
- Pan material: Tile mud-set vs. solid surface vs. acrylic. Mud-set with a linear drain gives you unlimited size and shape, but requires skilled labor and annual grout sealing. Solid-surface pans (Swanstone, Kohler) are seamless, repairable, and mildew-resistant - ideal for homeowners who want low maintenance. Acrylic is fastest to install and lowest cost, but the finish can dull over 10-15 years and replacement means full surround removal.
- Wall system: Full tile, large-format porcelain, or solid-surface panels. Full tile (ceramic, porcelain, or natural stone) offers the most design flexibility. In Weston’s hard water, though, natural stone needs sealing every 6-12 months. Large-format porcelain (24″x48″) reduces grout lines and mimics stone convincingly. Solid-surface panels - think Corian-style or Kohler Choreograph - install in hours, never need grout, and clean with standard bathroom spray.
- Fixtures and valve: Pressure-balance vs. thermostatic. Pressure-balance valves prevent scalding when someone flushes a toilet; they’re standard and reliable. Thermostatic valves hold exact temperature and allow volume control separately - worth the upgrade if multiple family members share the bathroom or if you run the shower while filling a tub elsewhere.
- Glass enclosure: Framed, semi-frameless, or frameless. Framed is cost-effective and watertight but visually heavier. Frameless with 3/8″ tempered glass and minimal hardware is what most Weston homeowners choose for master baths - it opens the room visually and shows off tile work. Semi-frameless splits the difference on price.
- Niche, bench, and accessories: Built-in or surface-mounted. A tiled niche recessed between studs costs less than you might expect ($200-$400 in labor) and eliminates shower caddies. Fold-down teak or solid-surface benches add $400-$900 and require precise waterproofing at the anchor points.
We carry Silestone and Caesarstone for vanity tops if your shower project expands to include the surrounding bath surfaces, and we source Kohler and Moen fixtures through our regular supply houses with full manufacturer warranty registration.
What Walk-In Showers & Shower Remodeling Costs in Weston, FL
| Project Type | Price Range |
|---|---|
| Shower replacement (same footprint, acrylic/solid surface) | $3,000 - $5,500 |
| Walk-in shower installation (new pan, tile walls, glass door) | $4,500 - $12,000 |
| High-end custom tile with frameless glass, niche, bench | $9,000 - $15,000+ |
Five factors move your number within these ranges:
1. Existing condition. A shower with a rotted subfloor, termite-damaged studs, or prior DIY plumbing adds $1,000-$3,500 in structural repair before we build anything new.
2. Drain and valve relocation. Keeping the existing stack is cheapest. Moving the drain across a concrete slab (common in Weston’s slab-on-grade construction) means cutting, re-pitching, and patching - typically $1,200-$2,800.
3. Material grade. A porcelain-tile shower with a Schluter-Kerdi waterproofing system and frameless glass runs roughly double an acrylic surround with a framed door. Both function well; the difference is aesthetics and longevity.
4. Permit scope. Weston requires plumbing permits for drain relocation and electrical permits if you’re adding lighting, exhaust fans, or heated floors. We handle submission and inspection scheduling, but permit fees and required plan revisions are passed through at cost.
5. ARB and HOA coordination. If your project involves an exterior window modification or vent relocation visible from the street, your village Architectural Review Board may require a separate submission with renderings or material samples. We build this timeline into our schedule, but it can add 2-6 weeks to project start.
A written estimate from Groundwork Construction Co. includes demolition, disposal, all materials, labor, permits, and final cleanup. It does not include temporary bathroom arrangements, post-project deep cleaning, or optional upgrades decided mid-project.
What Weston Homes Specifically Do to This Job
Weston is one of Florida’s most tightly controlled master-planned cities, where virtually every exterior construction project requires approval at three simultaneous layers: Broward County permits, Weston’s own municipal review, and the individual village Architectural Review Board. For walk-in showers and shower remodeling, this usually matters when your bathroom has an exterior window that you’re enlarging, replacing, or reconfiguring as part of the shower build - or when you’re adding an exhaust vent through a stucco wall.
We’ve worked across Weston’s villages - from Sector 3 near Bonaventure Boulevard to The Ridges off Griffin Road - and each has its own ARB packet with approved exterior color palettes and material lists. A window specification that passes in Sector 5 can be rejected in Sector 7. We request the specific village guidelines before pulling any permit, which is why our Weston shower projects rarely face the delays that catch out-of-area contractors.
The housing stock itself drives what we find. These 1990-2010 builds often have original fiberglass tub-shower combos with 30″x60″ footprints and single-handle pressure-balance valves. The bathrooms are typically generous by national standards - 5’x8′ minimum, often larger in master suites - which gives room for curbless or low-threshold walk-in designs that wouldn’t fit in older, smaller homes. But the concrete slab construction means drain relocation is more invasive than in homes with crawl spaces or basements.
South Florida’s humidity and hard water also shape material recommendations. We steer Weston homeowners away from unsealed natural stone in shower walls unless they’re committed to regular maintenance. Porcelain and solid-surface products hold up better long-term here.
Homeowners updating their master shower often tackle exterior projects in the same planning cycle. We regularly coordinate Roof Replacement & Installation in Weston or Metal Roofing in Weston for clients whose 20-30-year tile roofs are hitting replacement age alongside their interior renovations.
Groundwork serves Weston and nearby Southwest Ranches, Pembroke Pines, Cooper City, and Pine Island Ridge from our Fort Lauderdale base.
Serving Weston, FL - Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Walk-In Showers & Shower Remodeling in Weston
Most projects finish in 7-14 working days from demolition to final walkthrough. Custom tile with intricate patterns or imported materials can extend to 3 weeks. Call (844) 665-0162 and we’ll give you a firm timeline based on your material selections.
Yes, if you’re relocating plumbing, modifying electrical, or changing an exterior window or vent. Weston coordinates with Broward County for plumbing and electrical permits, and your village ARB may require separate approval for exterior alterations. We handle all submissions and inspections as part of our project management.
Absolutely. Keeping the drain and valve in place is the most cost-effective path and still allows for a full aesthetic transformation - new pan, wall system, fixtures, and glass. The limitation is layout: your showerhead stays on the same wall, and the drain location fixes your pan geometry.
Tile walls with professional waterproofing typically add $1,500-$4,000 over a solid-surface panel system for a standard 3’x5′ shower, depending on tile selection and niche or accent details. Solid-surface installs faster and needs no grout maintenance, but offers less design flexibility. We’ll quote both paths so you can compare.
We warranty our waterproofing and installation workmanship. Fixtures carry their manufacturer’s warranty - typically lifetime on Moen and Kohler valve bodies, with finish warranties ranging from 5 years to lifetime depending on the product line. We register all warranties in your name at project closeout.
Ready to Plan Your Walk-In Shower in Weston?
Call (844) 665-0162 for a free on-site estimate. We’ll measure your existing space, check for hidden conditions, walk you through pan and wall options with real samples, and deliver a written quote within 48 hours. No deposit required to schedule; work begins when you’re satisfied with the scope and the price.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Weston and South Florida homeowners since 2015.