Window Installation in Hollywood, FL - Scope, Timeline, and Cost
Window installation in Hollywood, FL typically involves removing existing units, inspecting and repairing the rough opening, installing new windows with HVHZ-compliant flashing and fastening, and finishing interior and exterior trim. Most residential projects take 1-3 days for a standard home with 8-15 openings, though pre-1992 concrete block homes in eastern Hollywood often need additional structural prep. Expect to invest between $4,500 and $15,000 for a full window replacement, or $8,000-$25,000 for impact-rated installations meeting High Velocity Hurricane Zone requirements. Call (844) 665-0162 and we’ll walk through your specific openings and provide a written, itemized estimate.
How We Handle Window Installation from First Measurement to Final Trim
We’ve installed windows across Hollywood’s two distinct housing markets - the 1950s-1970s CBS homes east of I-95 and the 1980s-2000s planned communities out near Hollywood West - and the process shifts noticeably depending on what we’re working with. Here’s how we stage every job.
Stage 1: On-site measurement and condition assessment (Day 1, 1-2 hours)
We measure every rough opening, check for square and level, and photograph existing conditions. On older homes in neighborhoods like Hollywood Hills or the eastern corridors near Young Circle, we’re looking for settled block, corroded aluminum frames, and the telltale staining that signals failed flashing. You’ll decide at this stage whether you’re keeping the same window style or changing operating type - casement to single-hung, for instance - since that affects the rough opening dimensions and permit drawings.
Stage 2: Product selection and permit submission (3-10 business days)
This is where you choose frame material, glass package, and hardware finish. We specify only Miami-Dade NOA-approved assemblies with HVHZ listings - non-negotiable in Hollywood - and submit permit applications to Broward County with engineered drawings. If you’re in a gated community or condo association west of the Turnpike, we also coordinate HOA architectural review, which can add 5-14 days depending on board meeting schedules.
Stage 3: Demolition and rough opening prep (Day 1 of install, 2-4 hours)
We remove existing windows, cut back interior drywall or plaster as needed, and expose the block or frame structure. On pre-Andrew homes, we frequently find corroded fasteners, missing sill pan flashing, or block deterioration from decades of salt-air intrusion. We repair or replace damaged substrate before the new unit goes in - skipping this step is how leaks start two years later.
Stage 4: Window setting, fastening, and weather sealing (Day 1-2, 4-6 hours per unit)
Each window gets set on a sloped sill pan, shimmed plumb and square, and fastened per the manufacturer’s HVHZ schedule - typically more fasteners at closer spacing than standard Florida installations. We apply backer rod and sealant at exterior perimeters, install head flashing with proper end dams, and tape the nailing fin to the weather-resistant barrier. Impact-rated units get heavier structural silicone bedding and additional anchorage.
Stage 5: Interior trim, exterior finish, and final inspection (Day 2-3)
We reinstall or replace interior casing, add low-expansion foam insulation in the jamb gaps, and finish exterior with matching stucco patch, siding repair, or trim coil as appropriate. Broward County requires a final inspection for all permitted window replacements - we schedule it, meet the inspector, and address any punch items before signing off.
The Window Options You’ll Actually Choose Between
Every window installation in Hollywood forces a series of real decisions with real trade-offs. These are the ones that move your price and your performance:
- Vinyl frames vs. aluminum vs. fiberglass/composite. Vinyl insulates better and costs less, but expands and contracts more in South Florida’s heat cycles - fine for inland Hollywood, less ideal for the barrier island’s salt air. Aluminum stands up to corrosion but conducts heat; thermal-break aluminum solves that at a premium. Fiberglass/composite (Andersen Fibrex, Marvin Ultrex) offers the best dimensional stability and paintability, priced accordingly.
- Impact-rated vs. non-impact with shutters. HVHZ compliance can be met either way. Impact windows eliminate shutter deployment and offer continuous protection - they’re what we install on most Windows & Doors in Hollywood projects. Non-impact with code-compliant shutters costs less upfront but requires annual maintenance and manual deployment. For second-story openings or elderly homeowners, impact-rated often pays for itself in convenience.
- Single-hung vs. casement vs. horizontal roller. Single-hung is standard, affordable, and familiar to inspectors. Casements seal tighter and catch breezes off the Atlantic, but the crank hardware needs more maintenance in salt air. Horizontal rollers work well for wide openings and meet egress requirements with less projection, though their track systems collect debris.
- Low-E coating and glass package. Standard Low-E cuts solar heat gain; laminated impact glass adds the PVB interlayer for debris resistance. For west-facing walls in Hollywood’s afternoon sun, we often spec double Low-E or heat-strengthened outer lites. The upgrade runs 15-25% over base glass but measurably reduces cooling load.
- Interior finish and hardware. White vinyl interiors are standard; painted or stained wood interiors (available on Marvin, Pella, Andersen architectural lines) coordinate with remodeled interiors but add cost and maintenance. Hardware finish - white, tan, bronze, brushed nickel - is a final aesthetic decision that doesn’t affect performance.
What Window Installation Costs in Hollywood, FL
| Project Scope | Typical Range |
|---|---|
| Standard window replacement (vinyl, non-impact, 8-12 units) | $4,500 - $15,000 |
| Impact window installation (HVHZ-rated, 8-12 units) | $8,000 - $25,000 |
| Single large picture or architectural window | $2,500 - $7,500 |
| Structural opening modification (enlarge, combine, relocate) | $1,500 - $5,000 per opening |
| Stucco repair and exterior finish matching | $500 - $2,500 |
Five factors push any window installation in Hollywood toward the high or low end of these ranges:
Existing condition of openings. Homes with original 1960s jalousie windows or corroded aluminum frames need more demo and substrate repair than newer vinyl replacements. We’ve opened walls in Hollywood Hills to find block spalled from decades of leaks - that repair adds time and material.
Frame material and brand tier. Builder-grade vinyl from a regional manufacturer runs roughly half the cost of Marvin or Pella architectural lines with custom sizing and interior wood cladding. Our Windows & Doors crew works across all tiers - you choose the brand, we handle the build.
Impact rating requirement and glass package. HVHZ impact certification isn’t optional in Hollywood, but you can meet it with laminated glass in a standard frame or a full architectural impact system. The performance difference is real; so is the cost gap.
Structural modifications. Converting a window to a door, combining two openings into one picture window, or cutting new openings in CBS walls requires engineered drawings, lintel support, and permit amendments. These changes add $1,500-$5,000 per opening depending on span and load.
Access and height. Second-story installations over concrete patios or pool enclosures require scaffolding or boom lifts - standard equipment, but it adds rental and labor hours. Homes on the barrier island with zero-lot-line setbacks sometimes need specialized access planning.
A written estimate from Groundwork includes windows, fasteners, flashing, sealants, trim materials, permit fees, and labor. It does not include window treatments, interior painting, or landscaping repair - those are separate trades or homeowner selections.
What Hollywood’s Climate, Codes, and Housing Stock Mean for Your Windows
Hollywood sits entirely within Florida’s High Velocity Hurricane Zone, sharing that designation only with Miami-Dade County. Every permitted window installation here requires HVHZ-listed assemblies backed by a Miami-Dade Notice of Acceptance - a product-approval layer invisible on standard Florida Product Approval searches. Contractors working from Palm Beach or Central Florida routinely get caught at the Broward permit desk when their specified windows lack this certification, killing schedules by weeks while replacement materials are sourced. We verify NOA compliance before anything gets ordered.
The city’s housing stock splits the work we see. East of I-95, in ZIPs like 33020 and 33021, 1950s-1970s concrete block homes built for the Northeast snowbird market still carry original jalousie windows, aging electrical panels, and flat roofs. These properties need full remediation - structural tie-downs, roof deck re-nailing, and complete impact-glazing upgrades - not just window swaps. West Hollywood and the planned communities near 33029 have 1980s-2000s construction with more current framing but often non-impact vinyl from that era that’s now at end-of-life.
The barrier island strip in 33019 adds salt-air corrosion to every metal component. Aluminum frames, fasteners, and even stainless steel hardware degrade faster there than inland, which is why we specify 316 marine-grade fasteners and fully flashed installations on oceanfront work. Coastal Construction Control Line setbacks can also trigger DEP permit layers that inland Broward projects never see.
Many homeowners pairing exterior upgrades will also look at Wood Fence in Hollywood or Chain Link Fence in Hollywood as part of a full property refresh - we coordinate those trades through the same project manager so you’re not juggling separate contractors.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Window Installation in Hollywood
Most residential window installations in Hollywood take 1-3 days of on-site work, plus 3-10 business days for permit approval and product lead time. Pre-1992 concrete block homes in eastern neighborhoods often need additional rough opening repair that can extend the schedule by a day. Call (844) 665-0162 and we’ll assess your specific timeline during the free estimate.
Yes - Broward County requires permits for all window replacements, and inspections for both rough opening and final installation. The permit application must include Miami-Dade NOA documentation proving HVHZ compliance, which we handle as part of our standard process. HOAs in gated communities may add a separate architectural review requirement.
In nearly all cases, yes - window replacement is a retrofit operation that doesn’t disturb interior systems. The exception is when you’re enlarging an opening, converting a window to a door, or relocating a unit, which may intersect with wall-cavity plumbing or electrical runs. We locate utilities before cutting and coordinate any needed reroutes.
Window replacement in Hollywood can use either impact-rated or non-impact units with code-compliant shutters - both meet HVHZ requirements. Impact window installation uses laminated glass and reinforced frames that withstand debris strike without shutter deployment; non-impact replacement requires operational shutters or panels for storm protection. Impact units cost more upfront but eliminate ongoing shutter maintenance and deployment.
Manufacturer warranties vary by brand and tier - typically 10-20 years on glass seal failure, with lifetime or 20-year coverage on vinyl frames from major manufacturers. Installation workmanship is warranted by Groundwork against leaks, operational defects, and trim failure for a period we specify in your written contract. We register all manufacturer warranties on your behalf and provide documentation at final walkthrough.
Get Your Window Installation Estimate in Hollywood
Call (844) 665-0162 to schedule a free, on-site estimate for window installation in Hollywood. Raymond Estevez or a senior project manager will measure your openings, assess existing conditions, walk through material options from our curated brand roster, and deliver an itemized written quote within 48 hours. No pressure, no deposit required to review - just specific numbers for your specific home.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Hollywood and South Florida.