Window Replacement in Lantana - Same-Day Service, Done Right the First Time

Window Replacement in Lantana, FL - What It Costs and How Long It Takes

Window replacement in Lantana, FL typically runs $4,500-$15,000 for a full-home project and takes 2-5 days from demo to final inspection, depending on frame condition and whether you’re upgrading to impact-rated units. Most Lantana homes we work on need the full package: removal of original jalousie or single-pane aluminum frames, new impact-rated vinyl or aluminum windows, and fresh stucco patching to match the existing CBS exterior. Call (844) 665-0162 for a free on-site estimate - we’ll bring samples and measure everything on the spot.

Call (844) 665-0162

Lantana sits right on the Intracoastal, and that salt air doesn’t negotiate. Original windows in this town weren’t built for post-Andrew wind codes or the corrosion that comes with living less than a mile from the Atlantic. If you’re replacing windows here, you’re not just swapping glass - you’re deciding how the house will perform in the next storm, and whether the work triggers deeper compliance requirements tied to flood elevation rules.

How We Handle a Window Replacement Job from Start to Finish

We’ve replaced windows in enough Lantana homes to know where the surprises hide. Here’s the actual sequence, with what you need to decide at each point.

Stage 1: Measure and spec selection (1-2 hours on-site)

We measure every rough opening, check the existing frame condition, and test for moisture intrusion in the stucco returns. You’ll decide on frame material (vinyl or aluminum), impact rating level, grid pattern, and exterior color. For Lantana homes near the water, we spec stainless or hot-dipped galvanized fasteners - standard hardware corrodes in 3-4 years here. We also pull the Palm Beach County property appraiser record and flag any flood-zone concerns before we write the estimate.

Stage 2: Permitting and lead time (1-3 weeks)

We submit to Palm Beach County’s building department with product approval documentation for your chosen window series. Impact-rated units from Andersen, Pella, PGT, or CGI all carry Florida Product Approval numbers that streamline this. If your home is in a FEMA AE zone and the window work pushes a broader renovation past the 50% substantial improvement threshold, we catch it now - not after demo starts.

Stage 3: Demo and prep (half day to full day)

We remove the old sashes and frames, cut back stucco to expose the nail fin attachment points, and inspect the block opening for water damage. In 1950s-1970s Lantana CBS homes, we often find corroded steel lintels or degraded mortar joints that need repair before the new window goes in. You get photos and a go/no-go call before we proceed.

Stage 4: Install and weatherproofing (1-3 days)

Windows go in level and plumb, shimmed to the block, then secured with corrosion-resistant anchors. We apply self-adhered flashing tape integrated with the existing moisture barrier, foam-seal the gaps, and patch stucco with a color-matched mix. For flat-roof homes common in Lantana’s older neighborhoods, we pay extra attention to head flashing since there’s no overhang to shed water.

Stage 5: Inspection and finish (same day or next day)

Palm Beach County inspects for proper anchoring, flashing, and impact-label verification. We install interior trim - you choose between PVC, wood, or drywall return - and do a final walkthrough to confirm operation, screen fit, and cleanliness. The county signs off, and we register your product warranty with the manufacturer.

The Window Choices That Actually Matter in Lantana

Not every window makes sense for this climate and this housing stock. Here’s where homeowners typically land:

• Vinyl frames with impact glass: Best value for most Lantana homes. The vinyl won’t corrode in salt air, and modern multi-chamber designs are stiff enough for large openings. Impact-rated versions from Simonton or PGT handle the wind load without the aluminum price premium. Trade-off: color choices are more limited than aluminum, and dark colors can soften in extreme heat.
• Aluminum frames with thermal break: Slimmer sightlines, more color options, and the strength for oversized openings. Essential if you’re doing architectural shapes or want a specific bronze or anodized finish. Trade-off: even with a thermal break, aluminum conducts more heat than vinyl - your AC works harder in August. And you must insist on marine-grade finishes; standard paint fails quickly here.
• Single-hung vs. horizontal roller: Single-hung is what most homeowners picture - bottom sash moves, top is fixed. Horizontal rollers (sliders) are common in Lantana’s original 1960s-70s construction and often fit the existing opening without structural modification. Trade-off: rollers have more moving parts and slightly worse air infiltration ratings, but they’re easier to operate over a kitchen sink or in a tight room.
• Impact rating level: All new windows in Palm Beach County must meet the wind-borne debris standard, but there’s a spread within that. Higher design pressure ratings (DP-50+) cost more but perform better in the eyewall. For Lantana homes east of Ocean Avenue, we typically spec DP-50 or above. Trade-off: $40-$80 more per window for the upgraded rating, but lower insurance premiums and no shutter deployment in a storm.
• Grid pattern and glass tint: SDL (simulated divided lite) grids give a traditional look without the thermal penalty of true divided lites. Low-E coating with argon fill is standard now and pays back fastest in south-facing rooms. Trade-off: grids add $30-$60 per window; Low-E is barely a cost add anymore and we include it unless you specifically decline.

Homeowners doing window replacement in Lantana as part of a full exterior update often ask about Windows & Doors in Lantana at the same time - coordinating both trades with one crew saves on mobilization and ensures the flashing details line up at every opening.

What Window Replacement Costs in Lantana, FL

Five factors push your job up or down this range:

Frame condition: If the existing aluminum frames are embedded in stucco and corroded into the block, we cut back more material, repair the opening, and patch larger areas. Adds $200-$400 per window.

Size and configuration: A standard 36″ x 60″ single-hung is straightforward. A 96″ x 60″ picture window with radius-top transom requires reinforcement, possible header modification, and two installers. That one opening can equal three standard windows in labor.

Impact rating and hardware: DP-50 rating with stainless hardware adds 15-20% over base impact units. For Lantana homes within sight of the water, we don’t recommend skipping it.

Stucco repair scope: Matching 40-year-old stucco texture takes skill and multiple coat passes. Some homes need full re-stucco of the window wall; others just need a 6-inch patch.

Permit and inspection complexity: Straight replacement permits run $300-$500 in Palm Beach County. If the job triggers flood-elevation review because of other concurrent work, add engineering and extended review time - not always a direct cost increase, but a schedule and contingency consideration.

Our written estimates include windows, installation, standard stucco patching, permit fees, and final inspection coordination. What’s typically separate: full re-stucco beyond the window perimeter, interior trim upgrades to hardwood, and any electrical relocation if you’re resizing an opening near a switch or outlet.

What Lantana’s Conditions Mean for Your Window Job

Lantana’s housing stock is almost entirely 1950s-1970s concrete block stucco homes, many with original jalousie windows that haven’t met code in decades. Those jalousies - the louvered glass slats common in mid-century Florida construction - are the first thing insurance adjusters flag after a named storm. Replacing them with impact-rated units isn’t just an energy upgrade; it’s often a condition of maintaining coverage.

The salt air here is genuinely destructive to standard building materials. We’ve opened walls in Lantana homes near Hypoluxo Island and found anchor bolts reduced to rust flakes. That’s why our window replacement specs call for hot-dipped galvanized or stainless fasteners on every job, not as an upgrade - as baseline. The incremental cost is maybe $8 per window; the alternative is frame loosening and water intrusion in year five.

Then there’s the flood-code dynamic unique to this town. Lantana’s low-lying position on the Intracoastal puts much of its older housing inside FEMA AE zones. Palm Beach County’s substantial improvement threshold - 50% of assessed structure value - means a window replacement combined with kitchen or bathroom work can cross the line, converting your permit into a flood-elevation compliance event. We pull the property appraiser data and run the math before you sign, because discovering this after demo starts can force a slab elevation that adds tens of thousands. A seasoned contractor working Windows & Doors in coastal Palm Beach County knows to front-load this check.

Homeowners often pair exterior updates with property-line work - if you’re refreshing the whole envelope, consider whether Vinyl Fence in Lantana or Aluminum Fence in Lantana fits your timeline. We coordinate both trades through one project manager.

Frequently Asked - Window Replacement in Lantana

Get Your Free On-Site Estimate for Window Replacement in Lantana

We’ll come to your Lantana home, measure every opening, check frame condition and flood-zone status, and bring sample frames from our curated brand lineup. You’ll get a written estimate with line-item pricing, a clear schedule, and no pressure to decide on the spot. Call (844) 665-0162 or request a visit through our site - most Lantana homeowners hear back same day.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Lantana and South Florida.