Window Replacement in Tequesta - Same-Day Service, Done Right the First Time

Window Replacement in Tequesta, FL: What It Costs and How Long It Takes

Window replacement in Tequesta typically runs $4,500-$15,000 for a full-home project and takes 2-5 days from demo to final inspection, depending on frame condition and whether you’re upgrading to impact-rated units. Most Tequesta homeowners we work with are replacing original 1960s-1980s single-pane aluminum windows that no longer meet current Palm Beach County wind-load codes. Call (844) 665-0162 and we’ll walk through your exact count, sizes, and whether your job triggers the Village’s permit requirements.

Call (844) 665-0162

How We Replace Windows - Stage by Stage

We break every window replacement in Tequesta into five clear phases so you know what’s happening and when you need to make decisions.

Phase 1: Site measure and spec lock (1-2 hours, your home)
Raymond Estevez or one of our project leads measures every opening to the ⅛ inch, checks for settled framing, rot, or termite damage around the sills, and notes whether your existing windows are nail-fin, block-frame, or retrofit installs. This determines your rough-opening condition and whether we need structural repair before the new units go in. You decide: vinyl, fiberglass, or aluminum frame material; impact vs. non-impact glass; and your preferred operation style (single-hung, casement, horizontal roller). We finalize your brand selection here - Andersen 400 Series, Pella Impervia, or Milgard Ultra are common choices for Tequesta’s salt-air environment.

Phase 2: Permit pull and material order (5-15 business days)
The Village of Tequesta maintains its own building department separate from Palm Beach County, so we file directly with them. Most standard window replacements qualify for over-the-counter permits if you’re not altering rough openings or load-bearing walls. Impact-rated upgrades trigger a Miami-Dade or Florida Product Approval check, which adds 2-3 days for verification. We order your windows now; lead times run 3-6 weeks for standard sizes, 8-10 weeks for custom architectural shapes.

Phase 3: Demo and rough-opening prep (Day 1 of install)
Crews arrive with floor protection, remove existing sashes and frames, and expose the rough opening. On Tequesta’s 1960s-1980s CBS ranch homes, we frequently find corroded aluminum frames fused to the stucco, requiring careful cutting to preserve the exterior finish. If the original installer skipped flashing or used felt paper instead of peel-and-stick membrane, we strip to the block and rebuild the waterproofing layer. This is where hidden costs emerge - rotted wood bucks, compromised stucco returns, or missing sill pans add a half-day and $200-$600 per opening.

Phase 4: Install, flash, and seal (Days 1-3, depending on count)
New windows go in level, plumb, and square; we anchor through the frame or nail fin per manufacturer spec, never through the sill. Every opening gets fluid-applied flashing at the sill, jamb boots, and a head flashing lapped into the drainage plane. In Tequesta’s salt-air zone, we use 316 stainless fasteners - standard galvanized corrodes within 5-7 years here. We foam-insulate the gap between frame and rough opening with low-expansion polyurethane, then install interior trim or restore your existing casing.

Phase 5: Inspection and finish (final day)
Village of Tequesta inspectors verify proper fastening, flashing, and operation. We correct any punch-list items immediately, clean the glass and tracks, and walk you through operation, cleaning, and warranty registration. Most manufacturers require online registration within 30 days for full coverage.

The Window Options You’ll Actually Choose Between

Every replacement job forces real trade-offs. Here’s what we see Tequesta homeowners weighing:

• Vinyl frames ($-$$) - Best thermal performance for the dollar, zero maintenance, but limited color choices (white, tan, bronze typically) and thicker sightlines that some homeowners find bulky. Fine for inland Tequesta homes; we don’t recommend standard vinyl within a quarter-mile of the Intracoastal or ocean - the salt degrades surface finish over 10-15 years.
• Fiberglass frames ($$-$$$) - Stronger than vinyl, thinner profiles, paintable, and impervious to salt corrosion. Pella Impervia and Marvin Ultrex are the names we spec most. Costs 30-40% more than vinyl but carries 20-year finish warranties and holds paint if you want a custom color match to your stucco.
• Aluminum frames ($$-$$$) - Slim sightlines, modern aesthetic, but thermally inefficient unless you pay for thermally broken construction. Required for some large architectural openings where vinyl or fiberglass can’t span the load. In Tequesta’s climate, only specify aluminum with a Kynar 500 fluoropolymer finish; anything less chalks and pits.
• Impact glass vs. laminated + standard glass - Impact-rated units pass the large-missile test required for high-velocity hurricane zones; they eliminate the need for shutters and qualify for insurance discounts. Standard laminated glass gives you UV and sound control without the impact premium. For Tequesta homes east of U.S. Highway 1 or in any VE flood zone, we typically recommend full impact. Inland, it’s a cost-benefit call.
• Single-hung vs. casement vs. horizontal roller - Single-hung is cheapest and most common. Casements seal tighter (better for wind-driven rain) but project outward, conflicting with exterior shutters. Horizontal rollers work well for wide, short openings typical of 1970s ranch plans but have more moving parts to maintain.

If your window replacement in Tequesta is part of a full exterior envelope update, our Windows & Doors in Tequesta page lays out how we coordinate siding, roofing, and entry door timing to avoid sequencing conflicts.

What Window Replacement Costs in Tequesta, FL

Five variables push your number up or down:

Frame condition. Original 1960s-1980s aluminum windows in Tequesta were often installed without proper flashing or with wood bucks that have rotted. Replacing compromised rough openings adds $150-$400 per window.

Stucco repair and matching. Cutting out old nail-fin frames damages the exterior finish. We bring in a stucco specialist to patch and texture-match - $300-$800 per opening depending on accessibility and whether you have a sand, dash, or smooth finish.

Impact rating requirement. Upgrading from standard to impact-rated glass typically doubles the unit cost but eliminates future shutter expense and reduces insurance premiums.

Size and operation complexity. A standard 36″ × 54″ single-hung is straightforward. Picture windows, arched tops, or bay configurations require structural headers and engineering - sometimes $2,000-$5,000 above per-unit pricing.

Permit and inspection scope. Village of Tequesta permit fees run modest, but if your home is in a historic district or your HOA requires architectural review (common in waterfront communities along the Loxahatchee River), add 2-4 weeks and potential design revision costs.

A written estimate from Groundwork includes windows, installation, flashing, insulation, interior trim, and debris removal. It does not include stucco repair, structural framing, or permit fees - we itemize those separately so you’re not surprised.

What Tequesta Homes Specifically Do to This Job

Tequesta’s housing stock shapes nearly every window replacement we bid here. The village’s core neighborhoods - the original 1960s-1980s CBS ranches along Tequesta Drive and County Line Road, plus the waterfront estates south of the Jupiter Inlet - present two completely different jobs.

The older inland homes almost always have single-pane aluminum windows with failed seals, corroded fasteners, and zero insulation value. Many were installed before the South Florida Building Code’s 1992 wind-load revisions, so the frames themselves won’t accept modern impact glass without full rough-opening rebuilds. We see this constantly in the Country Club area and near Tequesta Community Park.

Waterfront properties along the Loxahatchee River and Intracoastal present a different challenge: salt-air corrosion accelerates fastener and frame deterioration, and many of these homes have been through multiple renovations with layered, incompatible window systems. We’ve opened walls to find three generations of windows stacked inside one opening, each previous contractor having abandoned the old frame rather than remove it properly.

Then there’s the regulatory layer. The Village of Tequesta’s building department coordinates closely with FEMA flood-zone maps - many riverfront lots sit in AE or VE zones where any opening modification near grade triggers elevation compliance review. And if your property touches the Loxahatchee River’s federally protected corridor, even routine exterior work can require Army Corps of Engineers notification. Local contractors know to build that timeline in; out-of-area crews get caught flat-footed.

Homeowners in Tequesta often pair window replacement with exterior upgrades. If you’re considering perimeter work, our Vinyl Fence in Tequesta and Aluminum Fence in Tequesta crews coordinate scheduling so you’re not paying for multiple mobilizations.

Frequently Asked - Window Replacement in Tequesta

Get Your Free Window Replacement Estimate in Tequesta

Call (844) 665-0162 to schedule a free on-site measure. Raymond Estevez or a project lead will bring sample frames, check your rough-opening condition, and deliver a written estimate with line-item pricing for windows, installation, and any stucco or structural work your Tequesta home needs. Most estimates go out within 48 hours of the visit.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Tequesta and northern Palm Beach County. Our Windows & Doors crew works with Andersen, Pella, Marvin, Milgard, and other leading brands - you choose the product, we handle the build.