Window Replacement in West Hollywood, FL: What It Costs and How Long It Takes
Window replacement in West Hollywood typically runs $4,500-$15,000 for a full-home project and takes 2-5 days from demo to final inspection, depending on how many openings need updating and whether your existing frames are salvageable. Most 1950s-1960s CBS homes in the 33021 ZIP need full-frame removal rather than insert replacement, which adds labor but delivers proper hurricane compliance. Call (844) 665-0162 and we’ll walk your property with you to determine which approach fits your home.
How We Handle Window Replacement From First Measurement to Final Walkthrough
We’ve replaced windows in enough West Hollywood homes to know where the surprises hide. Here’s what actually happens, stage by stage, and what you’ll need to decide at each point.
Stage 1: On-site assessment and scope lock (Day 1, 1-2 hours)
We measure every opening, photograph existing conditions, and test for water intrusion around the frame perimeter. In West Hollywood’s older CBS construction, we often find original jalousie windows set directly into block openings with minimal or deteriorated flashing. You’ll decide at this stage: full-frame replacement (removes everything to the block) or retrofit insert (new unit inside existing frame). Full-frame costs more upfront but is the only path to proper hurricane-hardening compliance under current Broward County codes. We’ll also flag any electrical relocation needed if you’re widening openings or switching from crank to slider operation.
Stage 2: Material selection and permit pull (3-10 business days)
This is where you choose your window system. We bring samples from our curated roster: vinyl frames from Simonton or Jeld-Wen for budget-conscious projects; aluminum-clad wood from Andersen or Pella for architectural character; and impact-rated options from PGT or CGI if you’re upgrading to hurricane protection in the same job. Because West Hollywood sits in unincorporated Broward County, we pull permits through the County Building Division rather than a city hall, a workflow difference that can add a few days compared to neighboring Hollywood. We’ll handle the submittals, but you’ll need to approve the final product schedule before we file.
Stage 3: Demo and rough opening prep (Day 1 of install, 4-6 hours)
Crews remove existing sashes, frames, and any compromised flashing. On 1950s-1960s CBS homes, we frequently encounter uninsulated block walls and original terrazzo sills that require careful cutting to maintain interior finish integrity. If the block is crumbly around the opening, we’ll pour a concrete bond beam or install treated lumber bucking to create a secure fastening surface. This stage determines whether we hit our timeline: hidden water damage behind the stucco can add a half-day of remediation.
Stage 4: Installation and weather sealing (Days 2-4)
New units go in plumb and square, shimmed to manufacturer spec, then fastened with stainless or ceramic-coated screws rated for coastal corrosion resistance. We apply backer rod and polyurethane sealant to the exterior perimeter, then install pan flashing integrated with your existing weather barrier. For impact-rated installations, we verify missile-impact certification labels and photograph fastening patterns for the inspector. Interior trim goes last: we can match existing drywall returns, install new wood or MDF casing, or prep for your painter.
Stage 5: Inspection and final detail (Day 4 or 5, 1-2 hours)
Broward County requires a framing/rough inspection for full-frame replacements and a final inspection for all work. Because the County’s inspection scheduling runs differently than municipal departments, we coordinate these windows to avoid gaps. After sign-off, we operate every sash, screen, and lock with you, clean the glass inside and out, and haul away debris. Your final payment is due only after you’ve signed the completion checklist.
The Window Replacement Options You’ll Actually Choose Between
Most homeowners assume “window replacement” means one thing. Here are the real forks in the road, with what each costs you in dollars and performance:
- Vinyl frames (lowest maintenance, moderate cost): Cellular PVC construction resists South Florida’s humidity and UV without painting. Energy performance is strong, but vinyl expands and contracts more than other materials in extreme heat, which can stress sealant joints over a decade. Best for homeowners who want predictable performance without upkeep budgets.
- Aluminum frames (slim sightlines, higher conductivity): Thermal-break aluminum delivers modern aesthetics and narrow frames that maximize glass area, but even broken-bridge units conduct more heat than vinyl or wood. In West Hollywood’s unshaded lots, this can mean higher cooling loads. Best for architectural consistency with mid-century modern homes where original aluminum windows set the visual standard.
- Wood or aluminum-clad wood (premium feel, maintenance required): Interior wood grain that paint or stain can refresh; exterior aluminum cladding handles the weather. Andersen and Pella both offer clad lines in our roster. The trade-off: even clad units need periodic seal inspection at the cladding seams, and interior wood in high-humidity months requires conscientious finish maintenance.
- Impact-rated vs. non-impact (code compliance vs. cost): If your existing windows are being replaced as part of a larger renovation permit, Broward County will likely mandate impact-rated products or approved shutter systems. Impact units from PGT or CGI add 40-60% to material cost but eliminate the need for hurricane panels. Non-impact with shutters saves upfront but requires storage and annual installation discipline.
- Full-frame vs. insert replacement (structural integrity vs. speed): Insert replacement slides a new unit into the existing frame, cutting labor by roughly 30%. But on West Hollywood’s original block construction, we often find compromised or unflashed frames that make inserts a short-term fix. Full-frame allows proper water management detailing and is the only route to current code compliance.
What Window Replacement Costs in West Hollywood, FL
Window replacement in West Hollywood falls between $4,500 and $15,000 for typical residential projects. Here’s what pushes you toward either end of that range:
| Cost Driver | Low-End Scenario | High-End Scenario |
|---|---|---|
| Window count and size | 8-10 standard double-hungs | 15+ openings, including picture windows or custom shapes |
| Frame condition | Sound existing frames, insert-ready | Rotted or unflashed block openings requiring rebuild |
| Material grade | Vinyl, non-impact, single-hung | Impact-rated aluminum-clad wood with integrated screens |
| Structural modifications | No opening size changes | Widening for egress compliance or combining windows into sliders |
| Interior finish repair | Minimal drywall touch-up | Extensive terrazzo or plaster restoration after demo |
Our written estimates include: all windows per approved schedule, permit fees for Broward County, demolition and debris haul-off, installation labor, exterior sealant and flashing, and basic interior trim or drywall return. What typically isn’t included: window treatments, exterior stucco or paint repair beyond sealant joint, and any electrical or plumbing relocation if you’re changing window configurations. We itemize these separately so you’re not surprised.
Call (844) 665-0162 for an exact quote on your specific openings - estimates are free, and we’ll flag any high-cost variables during the initial walkthrough.
What West Hollywood Homes Specifically Do to This Job
The 33021 housing stock shapes nearly every window replacement we perform here. These are predominantly single-story concrete block homes built during the 1950s and 1960s South Florida boom, many with original jalousie windows - the louvered glass panels that crank open and close. Jalousies were practical before air conditioning became universal, but they’re energy sieves, security vulnerabilities, and impossible to hurricane-protect without full replacement.
Because West Hollywood is unincorporated Broward County, your permit runs through the County Building Division, not a city hall. This matters for timeline: the County’s inspection scheduling and fee structures differ from neighboring Hollywood or Pembroke Pines, and out-of-area crews often fumble the notice-board requirements or inspection-call protocols. We’ve handled enough County permits to know the rhythm, but it’s still a longer pathway than municipal permitting - typically 3-5 additional business days from submittal to first inspection approval.
The climate here is equally specific. Year-round humidity and intense summer UV degrade exterior sealants faster than inland Florida markets. We specify polyurethane or silicone sealants rated for 50+ shore A hardness and full UV exposure, not the cheaper latex products that craze and crack within three years. And because Broward sits in a High-Velocity Hurricane Zone, any significant window replacement tied to a renovation permit will trigger compliance review for wind-borne debris resistance - meaning you’ll likely need impact-rated products or an approved shutter system, even if your old windows predated the requirement.
Homeowners in West Hollywood often pair exterior updates with other projects. If you’re already addressing the envelope, Vinyl Fence in West Hollywood or Aluminum Fence in West Hollywood can be sequenced in the same construction window to minimize disruption. And if this replacement is part of a full exterior overhaul, see our broader Windows & Doors in West Hollywood page for how we coordinate roofing, siding, and fenestration as a single-scope project.
Serving West Hollywood, FL - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Window Replacement in West Hollywood
Most full-home window replacements take 2-5 days of active construction, plus 3-10 business days for Broward County permit processing. The County’s unincorporated permitting pathway adds a few days compared to municipal jurisdictions like Hollywood. Call (844) 665-0162 and we’ll give you a precise timeline after measuring your openings.
Yes. Because West Hollywood is unincorporated Broward County, all window replacements require a permit through the Broward County Building Division. Full-frame replacements need rough and final inspections; insert replacements in sound existing frames may qualify for a simplified permit. We handle the submittals and scheduling as part of our standard process.
In most cases, yes. If you’re keeping the same window sizes and operating styles, existing utilities stay untouched. Problems arise when homeowners want to widen a kitchen window over a sink or convert a fixed picture window to an egress slider - these changes may relocate wiring or plumbing lines. We’ll flag any utility conflicts during the initial assessment so you can decide before we order windows.
For original jalousie or 1960s metal windows, replacement is almost always the better investment. Repair parts are scarce, energy performance can’t be improved meaningfully, and neither type meets current hurricane codes. Repair might cost $200-$500 per window for hardware and reglazing, but you’ll still have a non-compliant, inefficient unit. Replacement delivers code compliance, modern efficiency, and operable warranties.
Manufacturer warranties vary by product line: vinyl frames typically carry 20-year glass and 10-year component coverage; clad wood lines often include 20-year glass, 10-year cladding, and 5-year interior wood finish. Installation workmanship is warranted by Groundwork Construction Co. for the period specified in your contract. We register all manufacturer warranties in your name at completion so you’re covered even if you sell the home.
Ready for Your Free Window Replacement Estimate in West Hollywood?
Call (844) 665-0162 to schedule an on-site assessment. Raymond Estevez or a member of our Windows & Doors crew will walk your property, measure every opening, explain the County permitting path for your specific address, and deliver a written estimate within 48 hours. No deposit required to schedule, and we only order windows after you’ve approved every detail.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving West Hollywood and Broward County homeowners since our founding.