Fence Gates in Fort Lauderdale, FL
A fence without a properly fitted gate is an unfinished project. In Fort Lauderdale, where saltwater air, afternoon downpours, and year-round humidity accelerate wear on hardware and wood alike, gate installation and replacement deserve the same material attention you’d give any other part of your exterior. At Groundwork Construction Co. of South Florida, we design and install fence gates as part of our full Fence Installation in South Florida service – so the gate integrates cleanly with the fence line, the hardware is matched to the material, and nothing is handed off to a separate trade to figure out later.
Whether you need a single walk-through gate for a side yard in Victoria Park, a double drive gate for a property in Harbor Beach, or a heavy-duty access gate on a larger lot in Coral Ridge, we spec the right product for the application and install it to hold. Call us at (844) 665-0162 for a free on-site estimate – we’ll measure the opening, assess the grade, and give you numbers you can actually plan around.
When You Need Fence Gates
Gate problems don’t always announce themselves the way a broken panel does. Some are slow and easy to ignore until they’re not. Here are the situations that typically bring Fort Lauderdale homeowners to us:
- Your existing gate sags or drags on the ground. Post movement is common in South Florida’s sandy, high-moisture soil – especially after a rainy season. A gate that worked fine in October may be raking the driveway by February.
- The latch no longer holds reliably. A latch that needs a shoulder to close isn’t keeping anyone out. In neighborhoods like Colee Hammock where property lines run close together and foot traffic is regular, a secure latch isn’t optional.
- You’re replacing or extending your fence and need a matched gate. Adding or upgrading fence panels without replacing the gate leaves a visual and structural mismatch. We tie them together in a single scope so the result looks and performs as one system.
- You’ve built a pool enclosure and need a self-closing, self-latching gate. Florida’s residential pool barrier codes require gates to open away from the pool and close and latch automatically. This is not a detail to skip – it’s a legal requirement in Fort Lauderdale and throughout Broward County.
- Your wood gate has warped or the metal has rusted through. The combination of salt air from the Intracoastal and seasonal humidity eats at untreated wood and standard steel hardware faster than most homeowners expect. A gate that was installed without corrosion-resistant hardware typically starts showing failure within a few years in coastal Fort Lauderdale zip codes.
- You need vehicle access where there wasn’t one before. Converting a side yard into a RV pad or adding a carport requires a properly framed, properly hinged double gate – the kind of work that needs accurate rough-in dimensions and the right post sizing from the start.
Our Fence Gates Process
We run gate projects the same way we run every other scope at Groundwork: measure twice, build once, and keep you in the loop at each decision point. Here’s how it works from first contact to finished install.
- On-site assessment and measurement. We come to your property in Fort Lauderdale and take actual field measurements of the opening, the grade change (if any), and the existing fence structure. We check soil conditions at the post locations because in South Florida’s sandy substrate, post depth and footing size matter significantly for gate stability over time.
- Material and hardware selection. Gate material should match or complement your fence – aluminum, vinyl, wood, or steel – but the hardware decision is equally important. We spec hinges, latches, and closers rated for coastal exposure where the property warrants it. You choose the product; we tell you what the differences will mean in five years.
- Permit review where required. Fort Lauderdale and Broward County have specific requirements around fence heights, setbacks, and pool barrier compliance. We identify permit requirements upfront so there are no surprises after installation. Pool gate compliance in particular needs to be documented before final inspection.
- Post setting and footing. A gate is only as solid as its posts. We set gate posts in concrete, at the depth required for the gate’s weight and the soil conditions at your specific address. For heavy double gates, we size the posts accordingly – undersizing is the most common reason gates fail early in Fort Lauderdale.
- Gate fabrication or delivery and installation. Depending on the gate type and material, we either fabricate on-site or work with our supply partners to bring in a built-to-spec unit. We hang the gate, align it, and adjust the swing before touching the hardware.
- Hardware installation and final adjustment. Hinges are set plumb, the latch is tested under load, and any self-closing hardware is adjusted to the correct tension. For pool gates, we verify code-required self-latching function before calling the job complete. You walk the gate with us before we leave.
Fence Gates Pricing in Fort Lauderdale
Gate pricing in Fort Lauderdale varies based on material, size, hardware spec, and whether the posts are new or existing. Below are typical installed ranges for the Fort Lauderdale market – these are starting points, not guarantees, because a double drive gate on a sloped lot with new post footings is a different project than a walk-through wood gate on a flat side yard.
| Gate Type | Typical Installed Range | Notes |
|---|---|---|
| Single walk-through gate (wood) | $350 – $750 | Pressure-treated or cedar; hardware upgrade adds cost |
| Single walk-through gate (aluminum or vinyl) | $450 – $950 | Coastal hardware recommended for Fort Lauderdale properties |
| Double drive gate (wood) | $900 – $2,000 | New post footings typically required; width and height affect cost |
| Double drive gate (aluminum or steel) | $1,100 – $2,800 | Steel frames add weight – post sizing is critical |
| Pool barrier gate (any material, code-compliant) | $500 – $1,200 | Self-closing and self-latching hardware included; permit may apply |
| Custom or oversize gate | $1,500+ | Site-specific; quoted after on-site assessment |
A few factors that move the number in Fort Lauderdale specifically:
- Soil conditions. Sandy or fill soil near the Intracoastal and in low-lying neighborhoods requires deeper footings and sometimes a larger concrete volume, which adds to labor and material cost.
- Salt exposure. Properties east of Federal Highway or within a few blocks of the water should use marine-grade or powder-coated hardware. Standard zinc hardware will rust within a season in those conditions. The upfront cost difference is modest; the replacement cost is not.
- Permit and inspection fees. Broward County permit fees are set by the municipality. Fort Lauderdale’s permitting process for fence and gate work has specific timelines – we factor those into the project schedule upfront.
- Existing post condition. If we’re replacing a gate on existing posts, we assess whether those posts are structurally sound. A gate hung on a rotted or undermined post will fail regardless of how good the gate itself is.
Call (844) 665-0162 for a free on-site estimate. We’ll walk the property, measure the opening, and give you a written number – no guessing, no vague ranges after the fact.
Why Homeowners in Fort Lauderdale Work With Groundwork
The short version: one contractor, every phase. We’re not a gate-only operation, and we’re not a fencing-only trade shop. Groundwork Construction Co. of South Florida handles kitchen remodeling, bathroom work, roofing, windows and doors, driveway and paver installations, and home additions alongside exterior work like fencing and gates. That scope matters when you’re a Fort Lauderdale homeowner with a larger project in mind.
A homeowner in Sailboat Bend who wants a new fence line, a fresh driveway, and eventually a kitchen remodel doesn’t need three separate contractors, three separate schedules, and three separate warranty conversations. We coordinate across all of it from a single point of contact. Built to spec, not to convenience – that’s the operating principle across every trade we run.
On the material side, we work with a curated group of brands across every category we cover. For gate and fence work specifically, we spec products and hardware appropriate to Fort Lauderdale’s coastal environment rather than defaulting to the cheapest option available. The goal is a gate that still works correctly in five years, not one that checks a box at installation. You choose the material and the budget range; we tell you what each option actually means for performance and longevity in this specific climate.
And when projects expand, we have the partnerships to support them. For clients exploring additions or accessory dwelling units alongside their exterior work, we work with prefab innovators like Mighty Buildings and Boxabl as well as traditional stick-built construction – giving Fort Lauderdale homeowners real options for expanding their home’s footprint without the chaos of managing multiple contractors. From driveway to roofline, it stays under one roof here.
Explore the full scope of what we offer on our home page, or get into the specifics of fencing material choices, post types, and panel options through our parent service page.
FAQs – Fence Gates in Fort Lauderdale
Do I need a permit to install a fence gate in Fort Lauderdale?
In most cases, yes – fence and gate work in Fort Lauderdale requires a permit through the City’s Building Services Division, particularly if the fence exceeds certain height thresholds or is adjacent to a pool. Broward County pool barrier code requires that pool gates be self-closing and self-latching, and those installations are subject to inspection. We handle permit identification as part of the project scope so you’re not left guessing after the gate is already in the ground. Call (844) 665-0162 and we can walk through what applies to your specific property.
How much does a fence gate cost in Fort Lauderdale?
A single walk-through gate installed in Fort Lauderdale typically runs between $350 and $950 depending on material and hardware. Double drive gates range from roughly $900 to $2,800 installed, with the wider spread reflecting differences in gate size, post requirements, and material choice. Pool-compliant gates with self-closing hardware generally fall between $500 and $1,200. Those are market ranges – your actual number depends on the specific opening, existing post condition, soil at the location, and whether salt-rated hardware is appropriate for your address. Call (844) 665-0162 for a free estimate based on your actual site.
What material holds up best for fence gates near the water in Fort Lauderdale?
Aluminum is generally the most durable gate material for Fort Lauderdale properties within a few blocks of the Intracoastal or the ocean – it doesn’t rust, doesn’t warp in humidity, and handles the salt air without needing the same level of maintenance that wood or steel require. Vinyl is also a strong option for lower-traffic walk-through gates. If you prefer wood, pressure-treated lumber with stainless or powder-coated hardware extends service life significantly compared to standard fasteners. The material decision matters less than making sure the hardware – hinges, latches, closers – is rated for coastal exposure, because that’s typically what fails first in coastal Fort Lauderdale zip codes like 33304 and 33316.
Can Groundwork replace just a gate without replacing the whole fence?
Yes. Gate replacement on an existing fence line is a common standalone project. We assess the existing posts first – if they’re structurally sound and set at the right depth, we work with them. If a post has rotted, shifted, or wasn’t set deep enough for the gate’s weight, we’ll tell you that before the new gate goes in rather than after. A well-hung gate on a compromised post won’t last, and we’re not interested in doing the same job twice. Call (844) 665-0162 and we’ll come out, look at what’s there, and give you a straight answer on what the project actually involves.
Start With a Free Estimate
If you’re in Fort Lauderdale and need a new gate installed, an old one replaced, or a pool barrier brought up to code, the next step is a free on-site estimate. We come to your property, measure the opening, check the posts, and give you written pricing you can plan around – no vague ballparks, no pressure.
Groundwork Construction Co. of South Florida serves Fort Lauderdale and the surrounding Broward County area across fencing, hardscaping, roofing, windows and doors, interior remodeling, and home additions. Gate work is one piece of a larger capability – and when your project grows, we grow with it.
Call (844) 665-0162 to schedule your estimate. We’ll handle the measure, the material conversation, the permit review, and the build – from the first site visit to the day you walk your finished gate.
Written by the team at Groundwork Construction Co. of South Florida, serving Fort Lauderdale.