Window Replacement in Dania - Same-Day Service, Done Right the First Time

Window Replacement in Dania: What It Costs, How Long It Takes, and What to Expect

Window replacement in Dania typically runs $4,500-$15,000 for a full-home project and is usually completed in 2-4 days once materials arrive. Most Dania homeowners we work with are dealing with original windows from 1940s-1960s concrete block or wood-frame homes that leak air, rattle in wind, or no longer lock securely. Call (844) 665-0162 and we’ll walk your property, measure every opening, and deliver a written estimate with line-item pricing.

Call (844) 665-0162

How We Handle Window Replacement from First Call to Final Walkthrough

We’ve replaced windows in enough Dania homes to know where the surprises hide. Here’s how the job actually unfolds.

Stage 1: On-site measurement and spec lock (Day 1, 60-90 minutes)

We measure every rough opening, check for settled framing, rotted sill plates, and evidence of prior water intrusion. In Dania’s older stock, we regularly find original windows set directly into concrete block with minimal flashing, which means the replacement method changes. You’ll decide on frame material, glass package, and exterior finish at this visit. We photograph each opening and note any drywall or stucco repair needed.

Stage 2: Ordering and lead time (1-3 weeks)

Standard vinyl double-hung units often ship in 7-10 business days. Custom sizes, impact-rated laminated glass, or architectural-grade fiberglass frames can stretch to 3-4 weeks. We order only after you’ve signed off on the exact spec sheet; no substitutions without your approval.

Stage 3: Demo and prep (Day 1 of install, 3-5 hours)

Crews remove old sashes, weights, and frames. On Dania’s mid-century block homes, we frequently encounter corroded steel fasteners from salt-air exposure, which slows extraction and may require diamond-blade cutting. We protect floors, contain dust, and inspect the rough opening for structural integrity before the new unit goes in.

Stage 4: Installation and sealing (Day 1-2, depending on count)

Each window gets leveled, shimmed, and fastened to manufacturer spec. We flash with peel-and-stick membrane, seal with low-expansion foam, and apply exterior sealant matched to your finish. In flood-prone AE zones common east of Federal Highway, we pay particular attention to sill pan drainage to prevent trapped moisture.

Stage 5: Trim, touch-up, and final inspection (Day 2-3)

Interior casing goes back on, or we install new if you’ve opted for a full package. We operate every sash, check lock engagement, and clean glass. If your project is part of a full Windows & Doors in Dania upgrade, we coordinate with the door crew so trim styles and paint schedules align.

The Window Spec Decisions That Actually Matter

Most homeowners assume “window replacement” means swapping like for like. The real choice is between four distinct paths, each with honest trade-offs:

• Vinyl frames (lowest maintenance, moderate cost): Cellular PVC construction resists salt corrosion better than painted metal in Dania’s coastal air. Thermal performance is solid, but color options are limited and dark hues can soften in intense south Florida sun. Best for homeowners who want performance without ongoing upkeep.
• Aluminum-clad wood (premium look, higher maintenance): Interior wood grain with exterior aluminum armor. Requires periodic seal inspection at the cladding seam, especially within a mile of the Intracoastal where salt spray concentrates. The aesthetic upgrade is real, but so is the long-term attention.
• Impact-rated laminated glass (code-driven or voluntary): Required in High-Velocity Hurricane Zones per Broward County amendments, and strongly advisable for any Dania home east of US-1. The interlayer adds $80-$150 per opening but eliminates shutter deployment and reduces exterior noise from FLL flight paths overhead.
• Retrofit vs. full-frame replacement: Retrofit slips a new unit into the existing frame, faster and cheaper but preserves any hidden rot or poor insulation. Full-frame removes everything to the rough opening, allows proper flashing and air sealing, but adds $150-$400 per window and extends the schedule by a day.

What Window Replacement Costs in Dania, FL

Five factors push any Dania window replacement toward the high or low end of that range:

Existing condition of the opening. Rotted wood sills, corroded steel lintels, or settled block that needs repointing before the new unit seats properly. We find this in roughly half the pre-1970 homes we touch in Dania.

Window count and size distribution. A 1,200-square-foot ranch with eight standard double-hungs sits at the low end. A two-story townhome with picture windows, transoms, and custom shapes climbs fast.

Material grade and brand tier. Our Windows & Doors crew works across Andersen 100 Series vinyl up through Marvin Ultimate fiberglass. The performance and warranty differences are real, and we quote multiple tiers when it helps you decide.

Interior and exterior finish work. Matching stucco texture, replacing rotted fascia, or repainting trim extends scope. We itemize this separately so you see where the construction ends and the cosmetic begins.

Permit and inspection complexity. Broward County requires permits for all window replacements; impact-rated work triggers additional product approval documentation. We pull permits as standard practice, but rush fees apply if you’re under HOA or insurance-imposed deadlines.

What’s included in our written estimate: all materials, labor, permit fees, disposal, and basic interior trim. What’s typically separate: stucco or drywall repair beyond the immediate opening, exterior painting, and any structural remediation discovered during demo.

Why Dania’s Housing Stock Changes How We Approach This Job

Dania’s position as Broward’s oldest city means we replace windows in buildings that predate modern codes by decades. The 1940s-1960s concrete block homes along Federal Highway and east toward the Intracoastal were built with single-pane awning or jalousie windows, minimal wall insulation, and electrical services that sometimes share wall cavities with window headers. We measure for modern window depths that can exceed original frame pockets by an inch or more, which means deciding whether to fur interior walls or accept a slightly recessed installation.

Salt-air corrosion hits hardware harder here than in West Hollywood or Davie. We’ve extracted window frames where steel fasteners were reduced to rust dust, requiring us to cut and patch block rather than simply unscrew. Homes in the VE flood zones near Whiskey Creek or the Dania Beach Pier area also demand we verify sill height relative to base flood elevation if any structural modification occurs.

The FAA factor matters too. While window replacement itself rarely triggers Part 77 review, any project that includes scaffolding above 35 feet or crane delivery of large architectural units can stall for 45 days if the Form 7460-1 filing wasn’t handled upfront. We coordinate this for multi-story work near the airport corridor so permits don’t sit in limbo.

Many Dania homeowners pair exterior envelope work with Vinyl Fence in Dania or Aluminum Fence in Dania installations to complete the property refresh under one contractor relationship.

Frequently Asked - Window Replacement in Dania

Get a Free On-Site Estimate for Window Replacement in Dania

We’ll walk your property, measure every opening, and deliver a written estimate with line-item pricing for materials, labor, permits, and any finish work. No deposit required to schedule. Call (844) 665-0162 or request a callback through our site. Most Dania estimates are completed within 48 hours of contact.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Dania and South Florida homeowners since our founding.