Tub-to-Shower Conversion in Coconut Creek: Scope, Timeline, and What You’ll Pay
A tub-to-shower conversion in Coconut Creek replaces your existing bathtub with a purpose-built shower enclosure, typically updating waterproofing, drainage, and surrounding finishes in the process. Most projects we handle in Broward County take 5 to 10 working days from demolition to final inspection, depending on whether plumbing stays put or gets relocated. Call (844) 665-0162 for a free on-site estimate - we’ll walk through your exact layout and give you a written quote with line-item pricing.
How We Approach a Tub-to-Shower Conversion from Start to Finish
We’ve refined this process across hundreds of bathroom projects in South Florida. Here’s what actually happens, and where your decisions matter most.
Stage 1: On-site assessment and scope lock (Day 1)
We measure your existing tub footprint, inspect the subfloor and surrounding walls for moisture damage, and confirm whether your drain location can stay or needs to move. You’ll decide right then between keeping the current layout - which saves roughly $800-$1,500 - or reconfiguring for a larger shower pan or bench seating. We photograph everything and note any Broward County permit triggers, like electrical work or structural changes.
Stage 2: Demolition and rough inspection (Days 2-3)
The tub, surround, and any compromised drywall or cement board come out. In Coconut Creek’s 1970s-era condo stock, we often find original galvanized drain lines or deteriorated wall cavities behind fiberglass surrounds. If we’re working in Wynmoor Village or similar vintage buildings, we’ll flag any post-tension slab or spalling concrete that needs engineering review before we proceed. This is the point of no return - everything exposed gets documented for the permit file.
Stage 3: Plumbing, pan, and waterproofing (Days 4-6)
New drain assembly goes in, along with pressure-balanced or thermostatic valve rough-ins if you’re upgrading controls. We install a sloped shower pan - either a prefabricated acrylic base or a mud-set pan with vinyl liner, depending on your budget and tile choice. Waterproofing follows: liquid membrane or sheet membrane (we’ve had excellent results with both, and we’ll explain the durability trade-offs). You’ll confirm your tile or wall panel selection by this stage, since lead times vary.
Stage 4: Wall finishes, fixture set, and glass (Days 7-9)
Tile or solid-surface panels go up. We set your showerhead, hand shower, and valve trim - brands like Kohler and Moen are what we spec most often for their parts availability in South Florida. If you’ve chosen a frameless glass enclosure, we template now and order; standard framed bypass doors typically ship faster. Niche placement, bench height, and grab bar blocking all get finalized during this phase.
Stage 5: Final inspection and walkthrough (Day 10)
Broward County inspects plumbing and structural work where permits require it. We run every fixture, check drainage speed, and seal all joints. You sign off on the punch list, and we hand over care instructions for your specific materials. The whole project, from our first visit to your first shower, usually spans two to three weeks including permit turnaround and material procurement.
This work sits within our broader Bathroom Remodeling in Coconut Creek practice, though many homeowners start with just the tub conversion and expand scope once they see what’s possible.
The Choices That Shape Your Shower: Materials and Configurations
Every tub-to-shower conversion forces a series of decisions. These are the ones that matter most, with the honest trade-offs we’ve seen play out in Coconut Creek homes:
- Shower pan: prefab acrylic vs. mud-set tile. Acrylic bases run $400-$900 installed, drain in a fixed location, and come with manufacturer warranties against cracking. Mud-set pans cost $1,200-$2,500 but let you place the drain anywhere, slope perfectly, and tile the floor for a seamless look. In older Coconut Creek condos with uneven slabs, mud-set often levels better.
- Wall surround: fiberglass panels, acrylic systems, or full tile. Fiberglass is fastest and cheapest ($800-$1,500), but the seams show and color options are limited. Acrylic wall systems like Kohler’s Choreograph line run $1,500-$3,000, install in a day, and resist mold without grout maintenance. Full tile - ceramic, porcelain, or natural stone - ranges from $2,500 to $6,000+ depending on material and pattern complexity. It’s the most durable and customizable, but grout needs sealing annually in Florida’s humidity.
- Fixtures: standard pressure-balance vs. thermostatic valves. Pressure-balance valves (most common, $150-$400 for the trim) prevent scalding when someone flushes a toilet. Thermostatic valves ($400-$900) hold temperature within a degree regardless of pressure changes - worth it if you have inconsistent municipal pressure or multiple bathrooms in use. Both Kohler and Moen make reliable units we service regularly.
- Glass enclosure: framed bypass, semi-frameless, or frameless. Framed bypass doors ($600-$1,200) are functional and watertight but visually heavy. Semi-frameless ($1,000-$1,800) splits the difference. Frameless ($1,500-$3,500+) uses thicker glass, minimal hardware, and opens up the room - ideal for smaller Coconut Creek bathrooms where every visual inch counts.
- Counter and niche materials: quartz, solid surface, or tile. If your conversion includes a built-in bench or niche shelves, the surface matters. Engineered quartz from Silestone or Caesarstone ($75-$150 per square foot fabricated) resists etching and never needs sealing. Solid surface like Corian ($50-$100) repairs seamlessly but scratches more easily. Tile matches your walls but requires grout maintenance.
Our Bathroom Remodeling crew keeps sample boards on the truck, so you can handle materials before committing rather than guessing from a catalog.
What Tub-to-Shower Conversion Costs in Coconut Creek, FL
In the Coconut Creek market, a tub-to-shower conversion typically runs $3,500-$10,000. Here’s what pushes a project toward the low or high end of that range:
| Cost Factor | Low-End Scenario | High-End Scenario |
|---|---|---|
| Existing layout preserved | Drain and valve stay put | Plumbing relocated across the room |
| Shower pan type | Prefabricated acrylic base | Custom mud-set with linear drain |
| Wall finish | Acrylic surround system | Floor-to-ceiling porcelain or stone tile |
| Fixture grade | Standard builder-grade trim | Thermostatic valve, multiple body sprays |
| Structural surprises | Clean demo, sound subfloor | Rot repair, post-tension slab remediation |
Our written estimates itemize demolition, plumbing rough-in, pan installation, waterproofing, finishes, fixtures, and permit fees. What typically isn’t included: structural engineering if your building requires it, HOA application fees (common in Wynmoor and similar communities), and any electrical work beyond a simple exhaust fan swap. We flag these possibilities during assessment so you’re not surprised.
Homeowners in Coconut Creek often pair bathroom updates with exterior work while we’re mobilized - Metal Roofing in Coconut Creek and Tile Roofing in Coconut Creek are projects we frequently coordinate for clients tackling whole-home improvements.
What Coconut Creek’s Housing Stock Means for This Job
Coconut Creek presents a specific remodeling environment you won’t find in newer Broward suburbs. The city’s concentration of 1970s and early-1980s concrete construction - particularly Wynmoor Village’s thousands of units - means we regularly encounter building conditions that change project scope midstream.
Original bathrooms in these buildings often have cast-iron tubs set into post-tension concrete slabs with drains tied to aging galvanized stacks. When we demo, we sometimes find that slab tendons have corroded from decades of salt-laden humidity exposure, producing spalling concrete that must be structurally repaired before any interior permit will pass Broward County inspection. This isn’t hypothetical - it’s a failure mode we’ve engineered around multiple times in the past two years alone.
The Florida Building Code’s High-Velocity Hurricane Zone requirements also affect our work. Any new window or exterior wall penetration near the bathroom triggers impact-rated standards, and while most tub-to-shower conversions stay interior, we’ve seen projects where homeowners want to add natural light via a new window or glass block - decisions that require HVHZ-compliant products and additional permitting.
Broward County’s high water table, meanwhile, limits below-grade drainage solutions. If your bathroom sits on a slab with historical moisture intrusion, we design the shower pan and waterproofing system accordingly rather than applying a one-size-fits-all approach.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Tub-to-Shower Conversion in Coconut Creek
Most conversions take 5 to 10 working days of on-site labor, with total project duration of 2 to 3 weeks including permit submission and material lead times. Condos in older buildings like Wynmoor may add time for HOA approval or structural engineering review. Call (844) 665-0162 and we’ll give you a timeline based on your specific building.
Yes, Broward County requires permits for plumbing modifications and any wall or structural changes. We handle permit submission, scheduling, and inspection coordination as part of our standard process. The permit typically adds $200-$500 to project cost depending on scope.
Often yes, if your existing drain location works for a standard shower pan and your valve height accommodates a showerhead. Keeping plumbing in place saves $800-$1,500 and shortens the timeline. We’ll confirm feasibility during our free assessment.
The most economical path uses a prefabricated acrylic shower pan and surround, keeps the existing drain and valve location, and reuses or upgrades only essential fixtures. In Coconut Creek, this approach typically lands near $3,500-$5,000. It’s a durable solution, though less customizable than tile.
We warranty our installation workmanship, and the materials we use carry their own manufacturer protections - acrylic pans often 10 years, tile installations per TCNA guidelines, and fixtures per Kohler or Moen standard terms. We document all warranty information in your project closeout packet.
Ready to Replace Your Tub with a Shower Built to Spec?
Call (844) 665-0162 to schedule a free on-site estimate for tub-to-shower conversion in Coconut Creek. We’ll assess your existing layout, explain what’s possible with your plumbing and structure, and deliver a written quote with line-item pricing. Raymond Estevez and our team at Groundwork Construction Co. handle every phase in-house - one contractor, one accountable point of contact from demolition to final inspection.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Coconut Creek and South Florida.