Full Kitchen Remodeling in Miami Springs: What It Costs and How Long It Takes
Full kitchen remodeling in Miami Springs typically runs $14,000-$45,000 and takes 6-10 weeks from permit approval to final inspection, depending on whether your home needs electrical service upgrades or structural modifications. Most homeowners in the 33166 ZIP code are looking at 8 weeks for a complete gut-and-rebuild of a 150-220 square foot kitchen in one of the city’s 1920s-1950s concrete block homes. Call (844) 665-0162 and we’ll walk through your space, your existing conditions, and what timeline fits your project.
How We Approach Full Kitchen Remodeling Start to Finish
We’ve learned that full kitchen remodeling goes smoother when homeowners know what’s coming before demo day. Here’s how we sequence every project in Miami Springs.
Stage 1: Existing Conditions & Pre-Construction Survey (3-5 days)
We document everything: your electrical panel capacity, whether you’ve got galvanized supply lines or copper, the condition of your slab, and any signs of prior unpermitted work. In Miami Springs, we regularly find original 1920s terrazzo floors that homeowners want preserved, or single-wythe block walls that need hurricane strapping added before we hang new cabinets. You’ll decide now whether you’re keeping your floor footprint or extending into an adjacent space.
Stage 2: Design Finalization & Material Lock (1-2 weeks)
This is where selections get real. Cabinetry lead times from KraftMaid or Wellborn run 4-8 weeks, so we order immediately after you sign off. Countertop templating can’t happen until cabinets are installed, but we schedule the slab fabrication slot now. You’ll finalize appliance specs, plumbing fixture locations, and whether we’re moving your sink or range. Moving either adds roughly $1,500-$4,000 to the job.
Stage 3: Demo, Rough-In, and Inspection (2-3 weeks)
Everything comes out: cabinets, counters, flooring if it’s being replaced, drywall back to block. We rough in new electrical (dedicated 20A circuits for appliances, GFCI protection, LED can layouts), plumbing (often switching from corroded galvanized to PEX or copper), and any structural changes. Miami-Dade inspectors look hard at hurricane strapping and envelope penetrations here, so we don’t rush this phase. You’ll have a walkthrough before we call for rough inspection.
Stage 4: Installation & Finishes (3-4 weeks)
Cabinets go in first, then countertops get templated and installed a week later. Backsplash, flooring, trim, and paint follow. We coordinate appliance delivery so everything lands when the connections are ready. If you’re choosing Silestone or Caesarstone for counters, fabrication takes 7-10 days after template. This is where most homeowners feel the project turn a corner.
Stage 5: Final Inspection & Punch List (3-5 days)
Miami-Dade final inspection covers electrical, plumbing, and general building code compliance. We address any punch items immediately after. Most homeowners are cooking again within a day of passing.
The Material and Layout Choices That Shape Your Kitchen
Full kitchen remodeling means making dozens of decisions. These are the ones that move your budget and your daily experience the most.
- Cabinet construction: Stock boxes with plywood sides and MDF doors keep costs down but limit sizing flexibility. Semi-custom lines from KraftMaid or Wellborn let you adjust depths and add organizational inserts. Full custom builds around odd Miami Springs wall dimensions but adds 30-50% to the cabinet line.
- Countertop material: Laminate runs $25-$40 per square foot installed but shows wear within 5-7 years in a busy kitchen. Engineered quartz from Silestone or Caesarstone hits $55-$95 per square foot and handles the acid, heat, and impact of daily cooking without sealing. Natural stone like granite or marble needs annual sealing and costs roughly the same as mid-tier quartz.
- Plumbing fixtures: Builder-grade chrome faucets from Moen or Kohler start around $150 and carry solid warranties. Professional-grade pull-downs with magnetic docking and ceramic disc cartridges run $400-$800 and last 15-20 years with cartridge replacements. We spec the valve bodies during rough-in, so upgrading later is possible without opening walls.
- Appliance configuration: Standard 30-inch range, over-range microwave, and dishwasher package keeps cabinetry simple. Switching to a 36-inch cooktop with wall ovens and a built-in microwave drawer changes cabinet layouts and electrical loads. We verify your panel can handle the additional amperage before you buy.
- Lighting plan: Code requires general illumination and task lighting, but the quality gap between basic cans and tuned LED layers with dimming and under-cabinet strips is noticeable every evening. We rough in for your ceiling type, whether it’s original plaster, dropped drywall, or exposed beam.
What Full Kitchen Remodeling Costs in Miami Springs, FL
Most full kitchen remodeling projects we quote in Miami Springs fall between $14,000 and $45,000. Here’s what pushes you toward either end.
| Cost Factor | Low-End Impact | High-End Impact |
|---|---|---|
| Kitchen size | Under 120 sq ft, galley layout | 250+ sq ft with island and walk-in pantry |
| Existing condition | Post-1970s CBS, modern electrical | 1920s-1950s block, galvanized plumbing, 100A service |
| Plumbing/electrical moves | Fixtures stay in place | Relocating sink, adding gas line, panel upgrade |
| Material grade | Stock cabinets, laminate counters | Semi-custom or custom cabinets, quartz or stone, professional appliances |
| Permit scope | Cosmetic with no structural changes | Wall removal, window relocation, structural beam |
A written estimate from us includes demo, disposal, all rough and finish materials, labor, permits, and inspections. It does not include appliances, which you purchase separately and we coordinate delivery for, or temporary kitchen setup. If your home needs a panel upgrade from 100A to 200A, that’s typically $2,500-$4,500 additional and requires FPL coordination, which we handle but bill separately.
Why Miami Springs Homes Make This Job Different
Miami Springs presents a combination of factors we don’t see in neighboring cities. The housing stock is old and built to pre-hurricane standards, yet the regulatory environment layers federal airspace rules on top of Miami-Dade’s already strict post-Andrew codes.
Most full kitchen remodeling we do here is in 1920s-1950s concrete block and stucco homes near Curtiss Parkway or in the Pueblo section. These places have single-wythe block walls with no insulation, original terrazzo floors that crack if you demo carelessly, and electrical panels that were never designed for modern appliance loads. We regularly open walls to find cloth-wrapped wiring or galvanized supply lines with interior corrosion that reduces flow to a trickle. The salt-laden air from Biscayne Bay, barely two miles east, accelerates metal degradation in anything that’s not copper or PEX.
Then there’s the FAA layer. Because Miami Springs sits directly under MIA’s primary flight paths, any structural modification that affects your roofline or adds vertical elements near windows requires filing FAA Form 7460-1. Most full kitchen remodeling stays below this threshold, but if your project includes a second-story addition or dormer as part of expanding the kitchen, that permit adds weeks we have to build into the schedule. We’ve seen contractors who don’t know this get surprised mid-project.
The high water table at roughly 9 feet elevation means any slab work, like lowering a floor for a flush transition or adding a footing for a removed load-bearing wall, needs careful moisture management. Inspectors here scrutinize structural connections and envelope penetrations more aggressively than inland Miami-Dade because of the Category 4/5 wind-speed design requirements under Florida Building Code Section 1609.
Homeowners in the older sections often deal with HOA architectural review boards that want material palettes consistent with Mediterranean Revival character. We account for that in our initial design conversations so you’re not reselecting tile at the last minute.
Serving Miami Springs, FL - Our Local Coverage Area
We’re based in the Miami Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Full Kitchen Remodeling in Miami Springs
Most projects run 6-10 weeks from permit approval to final inspection, with 8 weeks being typical for a complete gut-and-rebuild without structural changes. If your home needs a panel upgrade or your project triggers FAA airspace review, add 2-4 weeks. Call (844) 665-0162 and we’ll give you a timeline based on your specific house and scope.
Yes. Miami-Dade County requires permits for any electrical, plumbing, or structural work, which full kitchen remodeling always involves. We pull the permit, schedule inspections, and handle corrections. The permit process typically takes 2-3 weeks for straightforward kitchen projects in the 33166 area.
Yes, and it’s the most common approach we see in Miami Springs ranch homes from the 1950s-1970s. Keeping your sink, range, and dishwasher in existing locations saves $1,500-$4,000 and shortens the rough-in phase by several days. We still upgrade supply lines and electrical, but the slab and framing stay intact.
Full kitchen remodeling means everything comes out and gets replaced: cabinets, countertops, flooring, backsplash, lighting, plumbing fixtures, and appliances. A partial remodel might replace only cabinets and counters while keeping original flooring and fixtures. Kitchen Remodeling in Miami Springs covers the broader scope of what we offer, but this page focuses specifically on the complete rebuild.
We warranty our workmanship for one year, and most materials carry their own manufacturer warranties, ranging from 5 years on plumbing fixtures to lifetime on some cabinet lines. We register all manufacturer warranties in your name so you’re covered even if you sell the home. Ask us about specific coverage for Silestone, Caesarstone, or whichever brands you select.
Ready to Talk Through Your Full Kitchen Remodeling Project?
We’ll come to your Miami Springs home, measure your existing kitchen, check your electrical and plumbing conditions, and deliver a written estimate with line-item pricing. No pressure, no deposit required to get the number. Call (844) 665-0162 or reach out through our site to schedule. Most homeowners who are also updating bathrooms ask about Full Bathroom Remodeling in Miami Springs or Walk-In Showers & Shower Remodeling in Miami Springs during the same visit, and we can scope both while we’re there. Our Kitchen Remodeling crew works across Miami Springs and the surrounding area, and we’re familiar with the specific conditions these older homes present.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Miami Springs since our founding.