Jerith Construction in Hollywood, FL

Jerith Construction in Hollywood, FL | Groundwork Construction Co. of South Florida

We provide independent Jerith aluminum fence and railing service across Hollywood, from the barrier island to the western planned communities. The one thing that makes our Jerith work here different: we build for Florida’s High Velocity Hurricane Zone and the salt-air reality that destroys standard fasteners within a few seasons. Call (844) 665-0162 for a free estimate on installation, repair, or replacement.

Call (844) 665-0162

Why Hollywood Residents Choose Us for Jerith Service

We’ve been working with Jerith aluminum systems long enough to know where they hold up and where they don’t in South Florida. Raymond Estevez, our owner, grew up in Hialeah watching his uncle gut and rebuild houses block by block - that’s how the trade got into his blood before he ever walked into a classroom. He sharpened the technical side at Miami Dade College’s School of Engineering and Technology, working through construction management coursework while pulling weekend labor jobs across Broward and Miami-Dade. Over two decades later, he’s the contractor neighbors call when a project has to survive hurricane season and still look like it belongs on the street.

Raymond reads a job site the way a doctor reads an X-ray - fast, honest, and without sugarcoating what needs to come first. That directness matters with Jerith work because the problems are usually hiding: corroded brackets behind a clean powder coat, or a gate hinge that’s two sizes too small for the span. We carry genuine Jerith replacement panels, pickets, and caps, and we stock marine-grade stainless fasteners for coastal jobs that the original spec didn’t account for. Our Jerith sales & service covers the full line, but we’re independent - not manufacturer-authorized - which means we tell you when a repair makes sense and when a full rebuild is the smarter money.

From the 1950s CBS homes near Hollywood Boulevard to the newer tract builds west of Flamingo Road, we’ve installed and repaired Jerith fencing across every ZIP code in this city. Our Hollywood service area runs from the Intracoastal to the county line.

Common Jerith Construction Problems We Solve in Hollywood

• Powder-coat chalking and peeling on oceanfront installs. In Hollywood’s 33019 barrier-island zone, salt air strips standard powder coats within 5-7 years. We see this on Jerith Residential panels facing the Atlantic - the finish turns chalky, then flakes, exposing raw aluminum. Our fix: strip, prep, and re-coat with a marine-rated finish, or replace with factory-fresh panels if the substrate has pitted.
• Loose or corroded rail-to-post brackets on pre-2005 systems. Older Hollywood homes in 33020 and 33021 still carry original Jerith Classic fencing from the 1980s and 90s. The brackets were spec’d with standard steel fasteners that rust solid or snap off entirely. We replace with stainless hardware and add backing plates where the post wall has thinned from corrosion.
• Gate sagging and latch misalignment from undersized hinges. Wide driveway gates on 1950s-era Hollywood lots - common in the Lakes Section and areas near Young Circle - were often hung with hinges rated for lighter loads. The gate drops, the latch misses, and eventually the frame twists. We rehang with heavy-duty Jerith-compatible hinges or build a custom gate if the frame is too far gone.
• Fastener rust-out where stainless steel wasn’t spec’d. This hits faster in Hollywood than inland Broward. A Jerith fence three blocks from the water can look fine while the fasteners dissolve behind the rails. We drill-test suspect installations and upgrade to marine-grade stainless or silicon bronze before the panels start rattling in a storm.
• Sprinkler-induced post corrosion. Hollywood’s dense landscaping and automatic irrigation systems create a secondary moisture trap at the post base. We replaced a full Jerith Classic perimeter in the Lakes Section where sprinkler overspray had rusted posts from the ground up - finished in two days with epoxy-coated bases and stainless hardware.

Jerith Service in Hollywood: What Local Conditions Mean for Your Equipment

Hollywood sits entirely within Florida’s High Velocity Hurricane Zone, sharing that designation only with Miami-Dade County. Every permitted construction project here - from a room addition to a roof replacement to a Jerith fence install - must use HVHZ-listed assemblies backed by Miami-Dade Notices of Acceptance. Contractors moving in from Palm Beach County or Central Florida get caught at the Broward permit desk when their chosen materials lack that HVHZ listing, and Jerith fencing is no exception. The fasteners, anchors, and post bases we specify for Hollywood jobs are different from what we’d use in Wellington or West Palm Beach.

Then there’s the CCCL trap. In Hollywood’s 33019 barrier-island neighborhoods, the Coastal Construction Control Line requires a Florida DEP permit for any fence within the coastal setback zone. That adds a review layer - often weeks - that inland Broward projects never see. The permit also demands corrosion-resistant materials: stainless fasteners, epoxy-coated post bases, sometimes aluminum alloys with higher magnesium content. We’ve seen homeowners start a Jerith install in March and still be waiting for DEP sign-off in June because their contractor didn’t front-load the paperwork. We handle that sequence upfront, and we spec the materials to match what the permit requires, not what happens to be in the warehouse.

The housing stock splits the work, too. East of I-95, Hollywood’s 1950s-1970s CBS homes carry original Jerith or competitor aluminum fencing that’s past its service life - remediation and code-upgrade retrofits dominate. West of the interstate, the 1980s-2000s planned communities see more additions and full replacements where homeowners want a clean aesthetic match to updated landscaping, similar to the finish quality we deliver with our Kitchen Remodeling in Hollywood. We adjust our approach accordingly: repair-and-upgrade on the east side, design-build on the west.

Jerith Models & Products We Service in Hollywood

We work across Jerith’s full residential catalog. The Jerith Residential Aluminum Fence Panels - standard picket, flush-top, and spear-point styles - make up most of our Hollywood repair volume. The Jerith Estate Series Aluminum Railing shows up on elevated decks and balconies, especially in newer construction near the Intracoastal where code requires graspable handrails. The Jerith Classic Aluminum Fencing is what we find on older homes, and it’s where we do the most bracket and post replacement.

Our parts stance is straightforward: genuine Jerith panels, pickets, and caps for repairs to keep the look uniform. But we’re independent, not locked into OEM hardware. For coastal Hollywood jobs, we regularly spec aftermarket marine-grade stainless fasteners and upgraded powder coats that Jerith doesn’t factory-offer. “Do it right the first time or you’ll do it twice - and the second time always costs more.” That’s how we decide when to source beyond the catalog.

We keep common Jerith panel widths, post sizes, and stainless fastener kits stocked locally for same-week turnaround on most Hollywood repairs.

Jerith Service Pricing in Hollywood

FAQs - Jerith Construction in Hollywood

Service Areas Near Hollywood

We run Jerith service throughout Broward and into southern Palm Beach County. Near Hollywood, we regularly work in Jerith service in Fort Lauderdale just north, and Jerith service in Hialeah to the southwest. We also cover Davie, Pembroke Pines, Hallandale Beach, and Aventura on request.

Book Your Jerith Service in Hollywood Today

Call (844) 665-0162 to talk through your Jerith fence or railing project. We’ll check your property’s CCCL status, confirm HVHZ requirements, and give you a written estimate with no obligation. Same-week appointments available for most Hollywood locations.

Written by Raymond Estevez, Owner at Groundwork Construction Co. of South Florida, serving Hollywood since our founding.