KraftMaid Windows & Doors in South Florida, FL

KraftMaid Windows & Doors: The South Florida Owner’s Guide

KraftMaid window and door replacement in South Florida typically runs $4,500-$15,000 for a full window replacement and $8,000-$25,000 for impact-rated installations, with most KraftMaid-compatible units available same-day through our supplier network. We stock and install KraftMaid-compatible windows and doors across Miami-Dade, Broward, and Palm Beach counties, matching parts to your specific model series rather than forcing a generic fit. Most homeowners first realize something’s wrong when the sash won’t stay open in a humid July afternoon, or when they notice water staining the drywall after a summer storm that never used to get past the frame.

Call (844) 665-0162

Which KraftMaid Models This Applies To

KraftMaid built windows and doors under several series names between the late 1990s and mid-2010s, and the parts situation varies significantly by era. The KraftMaid Classic Series and KraftMaid Signature Series used different hinge systems and glazing bead profiles, so a 2007 Classic casement sash won’t accept a Signature hinge pack even if the rough opening dimensions match. Check the etched mark in the glass corner or the sticker on the frame head, which should show a model prefix (KM-C, KM-S, or KM-A for architectural grade) and a date code.

We source OEM KraftMaid hardware where it’s still manufactured, but we’ve also qualified aftermarket equivalents from Truth Hardware and Amesbury that meet the same load ratings at lower cost. The catch: KraftMaid’s older tilt-wash double-hungs used a proprietary balance shoe width (1-1/4 inch rather than the standard 1 inch) that most big-box replacements won’t fit. We measure on-site before ordering anything, because guessing wrong means a second trip and a delayed job. Groundwork Construction Co. of South Florida is an independent service provider, not affiliated with KraftMaid.

Signs Your KraftMaid Windows & Doors Are Failing

• Sash drops or won’t stay open. The coil balance system has lost tension, which happens faster in South Florida’s salt-air environment than inland climates. The metal fatigues, and once a balance slips its anchor, the window becomes a finger hazard.
• Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed, and the desiccant inside is saturated. In Boca Raton and Fort Lauderdale, we see this accelerate when afternoon sun hits east-facing units after morning humidity has already stressed the edge seal.
• Frame corner gaps or sealant separation. Vinyl and composite frames expand and contract through our wet-dry cycles, and KraftMaid’s older welded corners can stress-crack after 15-20 years of that movement. Water finds the gap, then the wall cavity finds the water.
• Hardware operates stiffly or grinds. Corrosion in the hinge or lock mechanism, usually from salt accumulation in coastal zip codes like 33139 or 33431. Lubrication helps briefly, but pitted metal needs replacement.
• Air infiltration even when closed and locked. The weatherstrip has compressed past recovery, or the frame has settled out of square. Either way, your AC is cooling the backyard, and FPL bills don’t lie.

Replacement Cost & What’s Included

The wide range on full replacements reflects unit size, whether we’re working from interior or exterior access, and whether stucco or trim needs repair after the old unit comes out. Second-story work in Coral Gables or Pinecrest with tight lot lines adds labor for scaffolding or specialized equipment. We quote upfront after measuring, not after starting. Our labor carries a workmanship warranty, and product warranties pass through from the manufacturer.

DIY or Call Us?

There’s a short list of checks any homeowner can handle safely. Verify the lock is fully engaging, look for obvious debris in the track, and confirm the weep holes at the frame bottom aren’t clogged with paint or insect nests. Beyond that, window and door replacement in South Florida gets complicated fast.

Impact-rated units weigh significantly more than standard windows, and a mis-measured rough opening means either a gap that fails inspection or a unit that won’t seat square. The HVHZ (High Velocity Hurricane Zone) code requirements for Miami-Dade and Broward mean permit documentation and installation details that DIY doesn’t typically account for. And any work above ground floor involves ladders, glass, and the kind of judgment call that goes badly when you’re tired. We’ve reinstalled enough homeowner-attempted jobs to know: do it right the first time or you’ll do it twice - and the second time always costs more. Call (844) 665-0162 and we’ll measure, spec, and handle the permitting.

FAQs