Andersen Driveway & Pavers in South Florida, FL

Andersen Driveway & Pavers: The South Florida Owner’s Guide

Andersen paver driveways and hardscape systems installed in South Florida typically run $7,000-$18,000 for a complete paver driveway, with individual paver replacement or repair sections starting around $400-$1,800 depending on access and matching requirements. We stock Andersen-compatible paver units, edge restraints, and bedding materials on our trucks across Broward and Miami-Dade counties, and most paver repairs or section replacements are completed same-day. Most homeowners notice trouble when individual pavers start rocking under tire weight, when joint sand washes out after our summer downpours, or when edge restraints pull away from the bedding course - all signs that the interlock system is compromised and water is getting underneath.

Call (844) 665-0162

Which Andersen Models This Applies To

Andersen’s hardscape line spans multiple series, and the part you need depends on when your driveway or patio was installed. The Andersen Permeable Series (2016-present) uses a 80mm thickness with a proprietary lug-and-groove edge profile that doesn’t interchange with standard rectangular pavers. The Andersen Classic Cobble and Tumbled Estate lines (still common in Coral Gables and Pinecrest installations from the 2010s) use a 60mm thickness but with a beveled edge radius of 3/16-inch - tighter than Belgard or Tremron equivalents. Check the underside of a lifted paver for the stamped “AND” mark and a two-digit year code; if you see “AND-18,” you’ve got the permeable line with the deeper lug.

Here’s where homeowners get tripped up: the color batch. Andersen runs production in dye lots, and South Florida’s UV exposure fades even sealed pavers unevenly. We always pull a spare from an inconspicuous corner - usually near the garage slab edge - to match against current stock or factory order. OEM Andersen pavers are available through their distribution network with a 4-6 week lead time for discontinued colors. We also source from Belgard and Tremron when the homeowner wants a functional match without the OEM premium, particularly for repairs under $2,000 where perfect color continuity isn’t the priority. Groundwork Construction Co. of South Florida is an independent contractor and not affiliated with Andersen - we source what’s right for your job, not what’s convenient for us.

Signs Your Andersen Driveway & Pavers Is Failing

• Rocking or wobbling pavers underfoot or under tire. This means the bedding sand has eroded or compacted unevenly, breaking the interlock that distributes load across adjacent units. In South Florida, this usually traces to poor initial compaction or organic debris breaking down in the joint sand.
• Joint sand washing out in sheets after rain. Our afternoon deluges will exploit any gap in the seal or polymeric sand installation. Once water flows through instead of across, it carries bedding material with it and creates voids beneath the pavers.
• Edge restraints pulling away from the pavement edge. Plastic or aluminum edging spikes work loose in our sandy soils, especially where irrigation oversaturates the base. The pavers follow outward, and the whole field loses structural integrity from the perimeter inward.
• Efflorescence blooming as a white haze across the surface. Calcium hydroxide migrating from the concrete base or bedding material - common in Andersen installations over poured concrete rather than open-graded base. It’s cosmetic but signals moisture is trapped in the system.
• Sunken or humped sections near downspouts or irrigation heads. Water volume overwhelms the base compaction in those zones. In Weston and Plantation, we see this where builders routed roof runoff directly onto paver fields without drainage planning.

Replacement Cost & What’s Included

What drives the range: paver availability (discontinued Andersen colors require factory order or acceptable substitute), base condition (if we lift pavers and find saturated, contaminated bedding, we strip to compacted gravel and rebuild), and access (tight courtyards in Coconut Grove or gated communities in Boca Raton add labor hours). Every quote breaks out parts, labor, and disposal. We warranty our installation workmanship; manufacturer material warranties run through Andersen or the substitute brand’s program directly.

DIY or Call Us?

There’s a honest line here. A homeowner can safely check for loose pavers, photograph the underside markings, and clear joint sand down to 1-inch depth for inspection. What goes wrong fast: lifting pavers without understanding the base layer, which in South Florida should be 4-6 inches of compacted #57 stone over stabilized subgrade. Disturb that bedding without re-compacting in lifts, and you’ll have a wobble patch that grows every rainy season. Polymeric sand installation looks simple but demands completely dry pavers, dry forecast, and precise watering activation - we’ve been called to redo DIY sand jobs where the homeowner created a haze that’s now bonded to the surface.

And here’s the thing Raymond Estevez will tell you straight: “Do it right the first time or you’ll do it twice - and the second time always costs more.” If you’re matching Andersen pavers from a 2014 installation, or if the sunken area is spreading, call (844) 665-0162. We’ll pull a paver, check the base, and give you a number that accounts for what we’re actually finding - not a lowball that balloons once we’re halfway in.

FAQs