Simonton Bathroom Remodeling in South Florida, FL

Simonton Bathroom Remodeling: The South Florida Owner’s Guide

Simonton bathroom remodeling in South Florida typically runs $9,000-$28,000 for a full renovation, with partial updates like shower replacements starting at $3,000-$8,500. We stock Simonton-compatible enclosures, frames, and hardware, and most South Florida homeowners get same-day measurement and next-day install scheduling. Most people realize something’s wrong when their shower door won’t seal against humidity, the vinyl frame warps from our relentless sun, or hardware corrodes faster than expected.

Call (844) 665-0162

Which Simonton Models This Applies To

Simonton’s bathroom line centers on the Reflections 5500 and 5300 series for framed enclosures, plus the Prism and DaylightMax collections for semi-frameless and frameless applications. The critical compatibility gotcha in South Florida: the 5500 series uses a proprietary 2-inch wall jamb profile that doesn’t interchange with standard 1.75-inch aftermarket frames, so measure before ordering any “universal” replacement. Check the etched logo in the glass corner or the stamped model number on the bottom rail - if that’s worn off, measure jamb depth and hinge hole spacing (3.5 inches center-to-center on 5500 hardware).

We’re an independent service provider, not affiliated with Simonton. For OEM versus quality aftermarket, we source from CRL and Prime-Line for hardware that matches Simonton’s stainless and brushed-nickel finishes without the 3-week factory lead time. Their vinyl glazing beads, though? Only OEM holds up to our UV index - aftermarket vinyl gets brittle in 18 months on a south-facing bathroom in Coral Gables or Fort Lauderdale.

Signs Your Simonton Bathroom Remodeling Is Failing

• Water pooling outside the shower curb. The vinyl sweep or drip rail has hardened or cracked, usually from chlorine and salt air accelerating deterioration. In South Florida, we see this fail in 4-6 years instead of the 10-year spec.
• Door drags or won’t close flush. Hinge pins corrode from our humid, salt-laden air, or the wall jamb shifts as stucco settles in the heat cycle. The frame itself may be square; the mounting is what’s moved.
• Visible frame separation or vinyl discoloration. UV degradation hits white and almond frames hardest - they yellow and become brittle. Once you see chalking on the surface, the structural integrity is already compromised.
• Glass chips at the hinge or sweep contact points. This means the grommet or bushing has worn through, metal is contacting glass, and catastrophic failure is coming. Don’t wait on this one.
• Constant mildew behind the frame. The butyl sealant has dried out, which happens faster in bathrooms that aren’t mechanically ventilated - common in older South Florida homes with original exhaust fans.

Replacement Cost & What’s Included

What drives the range: enclosure size (standard 60-inch versus custom neo-angle), glass thickness (3/8-inch tempered adds 30% over 1/4-inch), and whether we’re matching existing tile or opening the wall for plumbing access. We quote parts and labor separately so you see where your money goes. Every installation carries our workmanship warranty; manufacturer defects go through Simonton’s own coverage.

DIY or Call Us?

You can safely check the model stamp, measure your opening, and verify whether water damage has reached the subfloor by pressing firmly on the curb with a screwdriver handle. What goes wrong fast: tempered glass weighs 60-80 pounds per panel and explodes into granules if you torque a hinge wrong or chip an edge. The wall jamb must be plumb within 1/8 inch across 72 inches, or the door will bind forever. And that butyl sealant? One gap and you’re growing mold in the studs.

We’ve replaced three homeowner DIY attempts this year in Broward County alone. Do it right the first time or you’ll do it twice - and the second time always costs more. Call (844) 665-0162 and we’ll measure, spec, and install it without the guesswork.

FAQs