PGT Kitchen Remodeling in South Florida, FL

PGT Kitchen Remodeling: The South Florida Owner’s Guide

PGT kitchen remodeling in South Florida typically runs $14,000-$45,000 for a full renovation, with most projects completed in 4-8 weeks depending on material lead times and permit scope. We stock and install PGT windows and doors as part of kitchen remodels across Broward, Miami-Dade, and Palm Beach counties, and we can usually get your project moving within days of your call. Homeowners usually discover their PGT products need attention when they feel drafts near the sink window, spot condensation between impact-rated glass panes, or realize the casement over the breakfast nook won’t seal tight anymore - all signs that South Florida’s salt air and UV exposure have done their work.

Call (844) 665-0162

Which PGT Models This Applies To

PGT’s window and door lineup breaks into three main series we regularly integrate into South Florida kitchen remodels: the WinGuard aluminum and vinyl impact lines, the EnergyVue vinyl series, and the architectural-grade PGT Custom Windows. The critical compatibility gotcha is frame depth. WinGuard aluminum frames run 2-5/8 inches deep, while EnergyVue vinyl frames are 3-1/4 inches - swap them without adjusting the rough opening and your drywall returns won’t sit flush. Check the etched marking in the glass corner or the AAMA label on the frame header for the series code (WGA, WGV, ENV, or PC for Custom).

We source PGT products through authorized distribution, not gray-market channels. For kitchen remodels where the existing PGT unit is discontinued, we’ll match the sight lines and performance spec rather than force a mismatched replacement. Our KraftMaid and Wellborn cabinet lines pair with PGT windows regularly - we’ve learned which stool profiles and casing widths play nice with each frame series. You choose the brand, we handle the build.

Signs Your PGT Kitchen Remodeling Is Failing

• Draft around the window frame even when locked tight. The weatherstrip has compressed or the interlock rail has worn down from repeated cycling. In South Florida, salt particulates accelerate this - we see it first on east-facing kitchen windows catching morning marine air.
• Fog or moisture between impact glass panes. The insulating glass unit (IGU) seal has failed. PGT’s WinGuard units use a dual-seal system, but once breached, the desiccant saturates and the view turns milky. This won’t fix itself and degrades the impact rating.
• Crank handle spins without moving the sash. The operator gearbox has stripped, common on PGT casements after 8-12 years of heavy use. The operator arm may also have jumped its track from corrosion buildup in the hinge channel.
• Water staining on the sill or drywall below. Weep holes are clogged with debris, or the sloped sill pan wasn’t flashed correctly during original install. South Florida’s driving rains expose this fast - particularly during summer storms out of the southeast.
• Frame corner gaps or sealant separation. Thermal expansion cycles have stressed the frame joints, or the original sealant has UV-degraded. PGT vinyl frames move more than aluminum; without proper backer rod and sealant, gaps open within 5-7 years in full sun exposure.

Replacement Cost & What’s Included

What drives the range? Frame material (aluminum vs. vinyl), glass spec (impact-rated vs. non-impact, though South Florida code usually mandates impact), and whether we’re working within existing openings or reframing for a new layout. Our quotes itemize PGT product, rough carpentry, trim integration with your cabinetry, and finish sealant - no lump-sum mystery. We’re an independent service provider, not affiliated with PGT, which means we specify what your project actually needs rather than what’s moving in a distributor’s warehouse this month.

DIY or Call Us?

There’s a clear line here. A homeowner can safely check weep holes for debris, verify the lock engages fully, or photograph the AAMA label for us - that’s useful intel. But removing a PGT impact-rated window or door involves structural support, proper flashing integration with your home’s weather barrier, and code-compliant fastening patterns that vary by wind zone. Get the install wrong and you’ve compromised the impact rating that your insurance and building department care about. The same goes for electrical rough-in if you’re moving outlets or lighting as part of the kitchen reconfiguration - that’s licensed work in South Florida jurisdictions.

We’ve seen the aftermath of DIY window swaps where the homeowner skipped the sill pan or used the wrong sealant backer. Do it right the first time or you’ll do it twice - and the second time always costs more. Call (844) 665-0162 and we’ll walk through what’s actually involved before you commit.

FAQs