Tremron Kitchen Remodeling: The South Florida Owner’s Guide
Tremron kitchen remodeling in South Florida typically runs $14,000-$45,000 for a full project using Tremron hardscape materials integrated with interior finishes, and we can start design walkthroughs within 48 hours. Most homeowners find us after their existing kitchen’s connection to outdoor living spaces starts cracking, shifting, or draining poorly - especially where Tremron paver patios meet kitchen door thresholds. In Coral Gables and Pinecrest, we regularly see settlement issues where the original contractor didn’t account for South Florida’s seasonal water table swings.
Which Tremron Models This Applies To
Tremron doesn’t manufacture kitchen cabinets or appliances - they’re one of the largest paver and hardscape producers in Florida, with their product lines showing up in kitchen-adjacent outdoor spaces: pool decks, patios, walkways, and drive-that connect directly to kitchen entrances. The relevant series for kitchen remodeling integration are the Olde Towne, Stonehurst, AquaPave permeable pavers, and Granite Series coping and treads.
To identify what you’ve got, flip a loose paver or check your installation paperwork for the Tremron stamp - it’s molded into the edge on every piece made after 2018. The color code matters for matching: South Florida’s UV exposure fades the Sierra and Sunset colorways differently than Granite or Charcoal, so a replacement section needs the original batch reference or a skilled eye match. We stock samples from current production runs and can source legacy colors through Tremron’s Jacksonville distribution center, though discontinued blends may need a full patio section replacement to avoid patchwork.
Groundwork Construction Co. of South Florida is an independent contractor - we’re not affiliated with Tremron, but we’ve installed their products across Broward, Miami-Dade, and Palm Beach counties for years.
Signs Your Tremron Kitchen Remodeling Is Failing
- Pavers settling or rocking at the kitchen threshold. The bedding layer underneath has eroded, usually from poor drainage planning during original installation. South Florida’s afternoon downpours wash out sand base material if edge restraints weren’t properly pinned.
- White haze or efflorescence blooming across the surface. Calcium salts are migrating through the concrete matrix - common in Tremron’s standard pavers installed without a vapor barrier over high water table soil. It won’t damage structural integrity, but it signals moisture management failure that can reach interior flooring.
- Chipped corners at the kitchen door swing radius. These are high-traffic impact zones. Tremron’s Olde Towne tumbled edge hides wear better than their smooth-faced Granite Series, which shows every forklift scrape and dropped grill.
- Weeds or grass growing between joints. Polymeric sand has degraded, or the original installer used plain mason’s sand. In South Florida’s growing season, this accelerates fast and lifts pavers out of plane.
- Standing water 30 minutes after rain. Grade has reversed toward the kitchen foundation, or the original pitch was too shallow for Florida’s sheet-flow intensity. This is the one that rots door frames and invites termites.
Replacement Cost & What’s Included
| Scope | Price Range in South Florida |
|---|---|
| Full kitchen remodel with Tremron patio integration | $14,000 - $45,000 |
| Small kitchen remodel | $9,000 - $20,000 |
| Countertop installation (Cambria, Silestone, or Caesarstone) | $2,000 - $6,500 |
| Backsplash installation | $800 - $2,500 |
| Kitchen island installation | $3,000 - $10,000 |
| Tremron patio section repair/replacement only | $3,500 - $11,000 |
The wide range on full kitchen projects comes down to three things: whether we’re moving plumbing or electrical, whether cabinetry is KraftMaid, Wellborn, or a custom line, and how much structural work the Tremron-adjacent exterior needs. We don’t quote by square foot - we price by the actual tasks and materials your job requires. Every estimate breaks out labor, materials, and permits separately. You choose the brand, we handle the build.
DIY or Call Us?
There’s honest work a handy homeowner can do: pull a paver to check the base material, verify edge restraint condition, or measure grade with a 4-foot level. But the moment you’re cutting concrete pavers with a wet saw near a kitchen door frame, or regrading against a stucco exterior, the risk of water intrusion damage far exceeds any savings.
We’ve been called in after DIY paver resets in Weston and Plantation where the homeowner trapped moisture against the sill plate - $8,000 in rot repair that a proper installation would have prevented. Raymond’s rule: “Do it right the first time or you’ll do it twice - and the second time always costs more.” For a free estimate on your Tremron-integrated kitchen project, call us at (844) 665-0162.
FAQs
Properly installed Tremron pavers last 25-30 years in South Florida, though the surface seal and joint sand need refresh every 3-5 years given our UV and rainfall intensity. Call (844) 665-0162 for an exact assessment of your installation’s condition - estimates are free.
Isolated settlement can be spot-repaired if the base material is salvageable and you can match the paver color; widespread failure or discontinued colorways usually mean a larger section replacement. Call (844) 665-0162 and we’ll pull a test paver to give you a straight answer.
A contained hardscape repair takes 2-3 days; a full kitchen remodel with exterior integration runs 6-10 weeks depending on permit timing in your municipality. Call (844) 665-0162 for a schedule based on your specific scope.
We maintain relationships with Tremron’s Jacksonville distribution yard and can pull current production within a week; legacy or custom color matches may take 2-3 weeks. Call (844) 665-0162 to check availability for your specific color code.
Written by Raymond Estevez, Owner & General Contractor, Groundwork Construction Co. of South Florida at Groundwork Construction Co. of South Florida, serving South Florida and nearby areas.