Cabinets & Countertops in Lantana - Same-Day Service, Done Right the First Time

What Cabinets & Countertops Installation Costs and Involves in Lantana

Cabinets and countertops in Lantana typically run $6,000-$19,500 combined, with most projects finishing in 5 to 10 business days once materials arrive. You’re looking at cabinet installation ($4,000-$13,000) plus countertop installation ($2,000-$6,500), though older Lantana kitchens often need electrical panel upgrades or wall prep that adds time and cost. Call (844) 665-0162 and we’ll walk through your exact layout and give you a written, itemized estimate - no charge for the site visit.

Call (844) 665-0162

How We Handle Cabinets & Countertops From First Measurement to Final Caulk

We’ve refined this into five clear stages so you know what’s happening and when you need to make decisions. Here’s how it actually plays out in a typical Lantana home.

Stage 1: Site measure and condition check (Day 1, 2-3 hours)

We show up with laser measures and a checklist built for South Florida’s older housing stock. In Lantana, that means we immediately inspect your electrical panel size, check whether your walls are true (1950s-1970s CBS construction often isn’t), and test for moisture behind existing cabinets - the salt air creeping in from the Intracoastal finds every gap. You’ll decide at this stage whether you’re keeping your footprint or moving appliances, because that determines our next step.

Stage 2: Material selection and order (Day 1-3, homeowner decision required)

This is where the timeline gets real. Stock cabinets ship in 1-3 weeks. Semi-custom runs 4-8 weeks. Fully custom or imported frames can stretch to 12-14 weeks. For countertops, quartz and granite slabs need template approval before fabrication - typically 5-10 business days after template, plus 1-2 weeks for slab procurement if your color isn’t in local inventory. We don’t order until you’ve signed off on every spec, because these are built to your kitchen, not warehouse stock.

Stage 3: Demo and rough prep (Day 1 of install, 4-8 hours)

We pull existing cabinets, countertops, sinks, and cooktops. Then we expose walls for inspection. In Lantana, this is where we often find corroded drywall behind sinks - that salt-laden air penetrates window and vent gaps over decades - or discover that original 1960s electrical can’t handle modern appliance loads. If we find it, we stop and show you before continuing. No hidden continuation on compromised substrate.

Stage 4: Cabinet install and countertop template (Days 2-4)

Wall cabinets go in first, then bases, then we verify level across every run. Lantana’s slab-on-grade construction settles; we shim and scribe to compensate. Once cabinets are secured, we template for countertops - either digital or physical depending on material complexity. This template gets sent to our fabricator with your approved edge profile, cutout locations, and splash specifications.

Stage 5: Countertop install, plumbing reconnect, and final details (Days 5-7, or day of countertop delivery)

Slabs arrive, we seam (if needed), install, seal natural stone, reconnect sinks and faucets, and caulk all transitions. You do a walkthrough with our lead carpenter. We leave with every cabinet door aligned, every drawer glide tested, and your countertop care instructions in hand.

The Cabinet and Countertop Choices That Actually Matter

Most homeowners freeze here because the options look endless. These are the real decisions that move your price and your daily experience:

• Stock vs. semi-custom vs. custom cabinets: Stock boxes (KraftMaid’s standard lines, Wellborn’s Select series) come in 3-inch width increments and limited finishes - fine for straightforward layouts, and they keep you toward the lower end of that $4,000-$13,000 range. Semi-custom lets you adjust heights, depths, and add organizational inserts; you’re paying for the fit and function in a non-standard Lantana kitchen. Full custom means any dimension, any wood species, any finish - necessary for historic restorations or complex angles, but the price climbs fast.
• Frameless European vs. framed American construction: Frameless gives you slightly more interior space and a cleaner, more contemporary look. Framed is more forgiving in older homes where walls aren’t plumb, which matters in Lantana’s 1960s and 1970s stock. We assess your walls before recommending.
• Quartz vs. granite vs. solid surface countertops: Engineered quartz (Cambria, Silestone, Caesarstone) is non-porous, consistent in pattern, and needs no sealing - ideal for busy Lantana households who don’t want maintenance. Granite carries natural variation and requires annual sealing, but handles heat better and offers slabs no factory can replicate. Solid surface (Corian and similar) repairs seamlessly and integrates sinks, but scratches more easily and doesn’t carry the resale weight of stone.
• Edge profile and backsplash integration: A standard eased edge costs nothing extra. Ogee, waterfall, or mitered edges add fabrication time and waste. If you’re doing a full-height quartz backsplash, we template it with the countertop for seamless joints; tile backsplashes get handled separately and can be added later.
• Hardware and interior fittings: Soft-close hinges and full-extension drawer glides aren’t universal - confirm they’re included in your cabinet spec, or budget $8-$20 per opening to upgrade. Pull-out trash, corner carousels, and drawer organizers add function but also cost; we map these to how you actually cook, not a showroom fantasy.

What Cabinets & Countertops Costs in Lantana, FL

Five variables push you toward the high or low end of these ranges. First, linear footage of cabinetry - a galley kitchen in a 1950s Lantana duplex runs toward the bottom; a sprawling U-shape with island in a renovated waterfront home hits the top. Second, whether you’re keeping appliances in place or relocating sinks, ranges, or dishwashers; moving plumbing or electrical adds $500-$2,500 per line. Third, material grade - the jump from entry-level stock to semi-custom with upgrades is often $3,000-$5,000 alone. Fourth, wall condition behind existing cabinets; we’ve stripped backsplashes in Lantana homes to find crumbling stucco or moisture damage that needs remediation before new cabinets hang. Fifth, permit scope - Palm Beach County requires permits for cabinet and countertop replacement if you’re touching electrical, plumbing, or load-bearing walls; we pull these and price the compliance into your estimate.

Our written estimates include demolition, disposal, cabinet and countertop supply, installation, basic plumbing reconnect, and final cleanup. They don’t include appliance costs, flooring replacement, or structural repairs discovered after demo - though we photograph and discuss anything unexpected before proceeding.

If this work is part of a full Kitchen Remodeling in Lantana, we bundle the pricing and sequence it with your other trades to avoid redundant mobilization.

What Lantana’s Housing Stock and Coastal Position Do to This Job

Lantana’s built environment shapes every cabinets and countertops project we take on here. The town sits almost entirely on post-WWII concrete block stucco homes from the 1950s through 1970s - flat roofs, jalousie windows, and electrical panels that predate modern hurricane and energy codes. That means we routinely open kitchens to find 100-amp service panels that can’t handle a modern refrigerator, dishwasher, and microwave simultaneously. We flag this in our initial estimate because upgrading to 200-amp service isn’t a “maybe,” it’s a requirement if you’re installing contemporary appliances.

The salt-laden air rolling off the Intracoastal, less than a mile away, attacks everything metal in these homes. We’ve pulled cabinets in Lantana to find hinge screws corroded to dust and wall studs with compromised fasteners. We spec stainless steel or hot-dipped galvanized hardware on every installation here - standard zinc-coated fasteners don’t survive. The same air penetrates window frames and vent gaps, so we inspect drywall behind sink bases for moisture intrusion before hanging new cabinets; installing over compromised substrate guarantees cabinet box failure within two years.

Then there’s the flood code reality that defines Lantana renovation. Because so much of this town sits in FEMA AE zones, any project that crosses Palm Beach County’s 50 percent “substantial improvement” threshold triggers full flood-elevation compliance - potentially requiring slab elevation. A seasoned Lantana contractor pulls the FEMA flood map and county appraiser records before quoting. We’ve seen straightforward kitchen cabinet and countertop replacements turn into elevation mandates because the homeowner had already done a roof replacement and bathroom update that, combined, crossed the threshold. We check this proactively so you’re not facing a five-figure surprise after demo starts.

Many homeowners tackling kitchen updates also ask us about Walk-In Showers & Shower Remodeling in Lantana or a Tub-to-Shower Conversion in Lantana - we coordinate both under the same permit and timeline when it makes sense.

Frequently Asked - Cabinets & Countertops in Lantana

Get Your Cabinets & Countertops Estimate in Lantana

Call (844) 665-0162 to schedule a free on-site estimate for cabinets and countertops in Lantana. We’ll measure your kitchen, assess wall and electrical condition, check your flood zone status if relevant, and deliver an itemized written quote within 48 hours. Our Kitchen Remodeling crew handles everything from material selection through final installation - one contractor, every phase, with the brands you choose.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Lantana and South Florida homeowners with full-scope residential construction.