How Much Do Cabinets & Countertops Cost in Palm Springs, FL?
Cabinets and countertops in Palm Springs typically run $4,000-$19,500 for the combined installation, with most kitchen projects landing in the $8,000-$14,000 range depending on material grade and whether existing plumbing stays put. A straightforward cabinet swap with stock boxes and laminate counters can finish in under a week. Call (844) 665-0162 and we’ll walk your space, measure precisely, and deliver a written estimate with line-item pricing, usually within 48 hours.
How We Handle Cabinets & Countertops - Start to Finish
We’ve refined this process across hundreds of Palm Springs kitchens, mostly in those 1950s-1970s CBS ranch homes where the original cabinets are hanging on by their last corroded screws. Here’s exactly how your project moves.
Stage 1: Site measure and decision lock (Day 1)
Raymond Estevez or our lead carpenter walks the kitchen with a laser measure and level. We’re checking for out-of-plumb walls, uneven terrazzo or tile floors, and whether that soffit above your cabinets is hiding ductwork or just empty space. You’ll decide right then: keep the existing footprint or shift the sink, range, or island. Moving plumbing or electrical adds 2-3 days and $800-$2,500, so this choice sets everything downstream.
Stage 2: Demo and substrate inspection (Days 2-3)
We pull the old boxes, countertop, and backsplash. In Palm Springs, we almost always find moisture damage where the sink cabinet meets the slab, plus corroded fasteners from decades of humidity. We inspect the wall framing, especially behind range hoods where blocking may be missing for modern cabinet heights. If we find rot, we photograph it, stop, and quote the repair before proceeding. No surprises on the final invoice.
Stage 3: Cabinet install and adjustment (Days 4-6)
Stock or semi-custom boxes go in first, shimmed to level across those uneven older floors we measured. We use KraftMaid or Wellborn depending on your spec - both handle South Florida’s humidity better than budget imports with particleboard cores. Doors and drawer fronts get hung last, after the countertop template, so we can adjust reveals if the stone overhangs slightly.
Stage 4: Countertop template and fabrication (Day 6, plus 7-10 business days offsite)
We template with digital or physical methods depending on the material. Cambria quartz gets laser-templated for precision; solid surface or laminate can use stick templates. Fabrication happens offsite while your kitchen remains functional with temporary plywood counters if needed. Edge profiles, sink cutouts, and cooktop openings get finalized now - changes after this point cost you a new slab.
Stage 5: Countertop install, plumbing reconnect, and final punch (Days 17-19)
The stone arrives on A-frames, we silicone and mechanically fasten to the base cabinets, reconnect your sink and faucet, and seal all seams. We test every drawer, adjust soft-close mechanisms, and run the dishwasher through a cycle to confirm no leaks. You’re left with a clean kitchen and a binder with care instructions, manufacturer warranties, and our project photos.
The Cabinet and Countertop Choices You’ll Actually Decide Between
Most Palm Springs homeowners freeze at the showroom. Here’s the honest breakdown of what each choice costs you in dollars and daily use.
- Stock cabinets (KraftMaid Canvas or similar): $120-$180 per linear foot. Pre-sized boxes, limited finishes, 3-4 week lead times. Best for rental properties or flipping the 1,100-square-foot ranches near Lake Worth Road. The thermofoil faces hold up to humidity but can delaminate near stovetops after 5-7 years.
- Semi-custom cabinets (Wellborn or KraftMaid Select): $200-$350 per linear foot. Adjustable depths, 40+ finishes, soft-close standard. This is our sweet spot for owner-occupied Palm Springs homes - you get drawer organizers, pull-out trash, and proper plywood boxes without the 8-week wait of full custom.
- Laminate countertops (Formica, Wilsonart): $25-$45 per square foot installed. Seamless, hundreds of patterns, but the substrate swells if water penetrates the edge. Fine for utility rooms or tight budgets; we don’t recommend them for sink runs in humid kitchens.
- Quartz (Cambria, Silestone, Caesarstone): $75-$150 per square foot installed. Non-porous, no sealing, handles red wine and bleach spills without staining. Cambria’s Brittanicca and Torquay patterns dominate our Palm Springs installs - they read like marble without the etching anxiety. The trade-off: outdoor kitchens and west-facing windows can yellow some lighter colors over years of UV exposure.
- Natural stone (granite, marble, quartzite): $60-$200 per square foot installed. Granite is bulletproof but busy; marble etches with lemon juice; quartzite splits the difference but needs annual sealing. We steer Palm Springs clients toward honed or leathered finishes - polished surfaces show every water spot in hard-water areas.
- Edge profile: Eased or pencil edges cost nothing extra; ogee, waterfall, or mitered builds add $30-$60 per linear foot. In compact Palm Springs kitchens, we often recommend a simple 1.5-inch mitered edge on quartz - it reads thick and custom without the waterfall price.
What Cabinets & Countertops Cost in Palm Springs, FL - And What Moves the Number
For cabinet and countertop work in Palm Springs, expect $4,000-$19,500 all-in. Here’s where your project lands on that spectrum:
| Project Scope | Typical Range |
|---|---|
| Small kitchen, stock cabinets + laminate counters | $4,000-$7,500 |
| Mid-size kitchen, semi-custom cabinets + quartz counters | $8,000-$14,000 |
| Large or open kitchen, semi-custom + premium quartz or granite | $12,000-$19,500 |
Five variables push you high or low:
1. Kitchen footprint: A 10×10 galley in a 1955 Palm Springs ranch runs half the linear footage of a 1980s expanded kitchen with an island and pantry wall.
2. Existing condition: Those original cabinets often hide corroded wall studs and moisture-wicked drywall. Remediation adds $500-$2,000.
3. Plumbing and electrical relocation: Keeping the sink under the window costs nothing. Moving it to the island for open-concept flow runs $800-$2,500 in a slab-on-grade CBS home where we can’t access from below.
4. Material grade: The jump from stock to semi-custom cabinets typically doubles the cabinet line item. Quartz over laminate adds $2,000-$4,000 on a standard kitchen.
5. Permit scope: In Palm Springs, pulling a permit for cabinets and countertops alone is rare - but if your project triggers county inspection (see below), permit fees and required upgrades add $400-$1,500.
Our written estimates include demolition, disposal, cabinets, counters, install, plumbing reconnect, and basic backsplash removal. What’s typically separate: permit fees, structural repairs, new appliances, and any flooring work beyond the cabinet footprint.
What Palm Springs Homes Specifically Do to This Job
Palm Springs isn’t like Greenacres or Lake Worth Corridor. This village’s core housing stock - concrete block ranches built from the 1950s through 1970s - predates modern Florida Building Code wind-mitigation standards, and that changes everything about how we bid and build cabinets and countertops here.
Pull nearly any significant renovation permit in Palm Springs, and Palm Beach County’s post-Hurricane Andrew code adoption kicks in. We’ve seen kitchen cabinet jobs on streets like Purdy Lane and Kirk Road balloon when the inspector flags the original jalousie windows as non-compliant with current wind-load requirements. Suddenly your cabinet install is sequenced around a whole-house fenestration project, with drywall repair, exterior patching, and re-inspection delays.
The CBS construction itself creates quirks. Walls are often out of plumb by 3/8-inch or more, and the terrazzo floors common in these homes can be crowned or settled unevenly. We shim and scribe every cabinet box rather than trusting the wall, which takes longer but prevents the “floating toe kick” look you see in rushed installs. Humidity’s relentless here too - we spec plywood-box cabinets over particleboard every time, because we’ve opened too many Palm Springs kitchens where the cheap stuff has turned to oatmeal behind the sink.
Homeowners in the older sections near 10th Avenue North should also budget for the unexpected. That soffit above your cabinets? It might contain asbestos-wrapped ductwork from 1962. We test before we cut, and we build that contingency into our timeline so you’re not living with plywood counters for three extra weeks.
If you’re considering this as part of a full Kitchen Remodeling in Palm Springs, we’ll coordinate the cabinet and countertop phase with our Kitchen Remodeling crew so you’re not managing multiple trades. And since we cover Palm Springs from our Fort Lauderdale base, we’re familiar with the village’s specific inspection routes and typical hold points.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Cabinets & Countertops in Palm Springs
Most projects finish in 2-3 weeks from demo to final plumbing reconnect, with 7-10 business days of that being offsite countertop fabrication. If your project triggers Palm Beach County’s mandatory window or wind-mitigation upgrades, add 1-2 weeks for inspection sequencing. Call (844) 665-0162 and we’ll assess your specific timeline during the free estimate.
Pure cabinet and countertop replacement with no plumbing relocation typically doesn’t require a permit in Palm Beach County. However, because Palm Springs’ 1950s-1970s housing stock often triggers broader code compliance during any permitted work, we evaluate permit strategy case by case. If you’re already pulling a permit for electrical or structural work, we’ll bundle the cabinet scope to avoid a second inspection cycle.
Yes, and this is the most cost-effective approach in Palm Springs’ older CBS homes where plumbing is embedded in the concrete slab. Keeping the existing “wet wall” configuration saves $800-$2,500 and avoids the risk of hitting embedded pipes. We template countertops precisely around your current sink and cooktop cutouts.
Refacing runs 60-70% of replacement cost but only works if your cabinet boxes are structurally sound. In Palm Springs, we find that 40% of the original cabinets from the 1960s and 1970s have moisture-damaged bottoms, corroged hanging rails, or particleboard that’s degraded past saving. We inspect before recommending either path - no point in veneering a rotted box.
Manufacturer warranties cover material defects: KraftMaid and Wellborn offer limited lifetime warranties on cabinet boxes and hardware; Cambria, Silestone, and Caesarstone warranty their quartz for 10 years to 25 years depending on the product line. Our installation workmanship is covered for one year, and we’ll return to adjust hinges, re-caulk seams, or address any settlement issues at no charge. Call (844) 665-0162 to discuss warranty specifics for your material choices.
Get Your Free Estimate for Cabinets & Countertops in Palm Springs
We’ll measure your kitchen, inspect the existing conditions, and deliver a written estimate with line-item pricing for cabinets, countertops, and any anticipated repairs. Most Palm Springs estimates are ready within 48 hours of our site visit. Call (844) 665-0162 or request your appointment online. Homeowners often pair kitchen updates with Walk-In Showers & Shower Remodeling in Palm Springs or a Tub-to-Shower Conversion in Palm Springs - ask about scheduling multiple scopes with one crew.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Palm Springs and South Florida.