How Much Does Door Installation Cost in Loxahatchee, and How Soon Can It Start?
Door installation in Loxahatchee typically runs $450-$1,800 for a standard prehung entry door and $800-$3,200 for impact-rated or wind-load-rated units, with most residential jobs completed in one to two days once materials arrive. For homes in The Acreage and surrounding unincorporated areas, we factor in Palm Beach County’s dual-agency permitting when the project ties into any structural or envelope work. Call (844) 665-0162 and we’ll walk through your exact opening, the rating you need, and whether your job triggers a county permit or a straightforward replacement.
What Happens During Door Installation - Start to Finish
We break every door installation into five clear stages so you know what’s happening, what you’re deciding, and how long each piece takes.
Stage 1: Site measure and product lock (Day 1, 60-90 minutes)
We measure the rough opening, check plumb and level, and photograph the existing frame, threshold, and surrounding trim. You’ll decide on door material, impact rating, finish color, hardware style, and whether you want the sidelight or transom replaced at the same time. For Loxahatchee homes built in the 1985-2005 wave, we often find original jambs set directly into block or frame construction with minimal flashing - something we’ll flag now so it doesn’t surprise us later.
Stage 2: Ordering and permit pull (3-10 business days)
Standard prehung units from Jeld-Wen or Masonite ship in 3-5 days. Impact-rated doors from PGT or CGI, or architectural-grade Marvin or Andersen units, typically run 2-4 weeks. If your job requires a Palm Beach County permit - any structural modification, new opening, or conversion to impact-rated in a wind-borne debris region - we submit now and coordinate the inspection schedule. For simple like-for-like replacements in existing openings, many Loxahatchee jobs skip permitting entirely.
Stage 3: Demo and prep (2-4 hours on install day)
We remove the old door, frame, and hardware, then inspect the rough opening for rot, termite damage, or settling cracks common in The Acreage’s 30-40-year housing stock. If the sill pan or flashing failed, we cut back siding or stucco as needed and install new waterproofing. This is where we discover whether the previous installer used proper shims and sealant - too often, they didn’t.
Stage 4: Hang, shim, and seal (3-5 hours)
We set the prehung unit level and square, shim behind each hinge location, and fasten through the jamb into framing with structural screws. For impact-rated installations, we use longer fasteners and reinforced strike plates per the manufacturer’s Miami-Dade or Florida Product Approval. We spray-foam the gap, install the threshold with silicone bedding, and hang your chosen hardware. You’ll test the swing, latch, and deadbolt before we move on.
Stage 5: Trim, paint, and final walk (1-2 hours)
Interior casing and exterior brickmold go in last, with paint or stain touch-ups to match. We clean the site, haul the old door, and run through our checklist: weatherstripping compression, threshold drainage slope, lockset function, and warranty registration. Most door installations in Loxahatchee wrap by late afternoon.
The Door Options You’ll Actually Choose Between
- Fiberglass skin with steel frame: The practical default for Loxahatchee entry doors. Resists dents, humidity, and UV better than steel alone. Smooth or wood-grain texture; paint holds well. Mid-range cost, 15-20 year realistic lifespan. Best for homeowners who want reliability without premium pricing.
- Steel slab with thermal break: Stronger security, better insulation value, but dents permanently and can rust at the bottom if the threshold drains poorly. The Acreage’s wet-season saturation makes this a concern for doors close to grade. Budget-friendly, but requires vigilant maintenance.
- Solid wood (mahogany, walnut, oak): Unmatched appearance, can be refinished repeatedly, but expands and contracts aggressively in South Florida humidity. Needs covered entry or deep overhang to survive. Higher cost, higher maintenance, unmatched character.
- Impact-rated fiberglass or aluminum: Required by Florida Building Code in wind-borne debris regions if you’re within one mile of the coast, and strongly advisable anywhere in Palm Beach County for garage-to-house doors and primary entries. Tested to withstand missile impact at 50 feet per second. Adds $300-$1,200 per opening but may reduce insurance premiums.
- Multi-point locking hardware vs. standard deadbolt: Multi-point systems bolt the door at three or five points into the frame, critical for impact-rated units and any door over 8 feet tall. Adds $150-$400. Standard deadbolts suffice for basic replacements.
- Prehung vs. slab-only: Slab-only means reusing your existing frame - rarely worth it if the jamb is original to a 1990s Loxahatchee build. Prehung gives you a factory-square unit with integrated sill and weatherstripping. We recommend slab-only when the frame is newer and perfectly sound.
What Door Installation Costs in Loxahatchee, FL
Most residential door installations we complete in Loxahatchee fall between $450 and $3,200 per opening, with the majority clustering in the $650-$1,400 range for standard prehung replacements and $1,200-$2,800 for impact-rated upgrades.
| Scope | Typical Range |
|---|---|
| Standard prehung entry door, existing opening | $450-$1,100 |
| Prehung with sidelight or transom replacement | $900-$1,800 |
| Impact-rated entry door, prehung | $1,200-$2,800 |
| Impact-rated with multi-point hardware | $1,600-$3,200 |
| New opening cut, structural header required | $2,000-$4,500+ |
Five variables push your number up or down:
1. Existing condition of the frame and opening. Rot, termite damage, or settling cracks in The Acreage’s older stock add $200-$800 for reframing, sistering studs, or sill replacement.
2. Material grade and brand tier. A Masonite fiberglass unit costs roughly half a comparable Marvin or Andersen architectural line. You choose the brand, we handle the build.
3. Impact rating and code requirements. Florida Product Approved doors carry a premium but may be non-negotiable depending on your wind zone and insurer.
4. Structural modifications. Widening the opening, moving a door to a new wall, or adding a transom means headers, permits, and inspections - typically $800-$2,500 above base.
5. Trim, paint, and hardware finish. Custom stain-matching, extensive stucco repair, or upgrading to smart locksets adds $150-$600.
Our written estimates include the door unit, delivery, demo, installation, insulation, trim, hardware hang, and haul-away. They don’t include permit fees (if required), exterior paint or stucco repair beyond basic touch-up, or electrical work for new doorbell or smart lock wiring.
What Loxahatchee Homes Specifically Do to This Job
The Acreage isn’t Boca Raton, and door installation here carries constraints that coastal crews routinely miss.
Permitting runs through Palm Beach County’s unincorporated building department, not a city office. For straightforward like-for-like replacement in an existing opening, no permit typically applies. But if you’re upgrading to impact-rated in a home that didn’t originally have it, converting a window to a door, or modifying the rough opening, we pull a county permit and schedule the rough and final inspections. Because Loxahatchee properties rely on private wells and septic, any project that affects the building envelope or footprint can trigger a Florida Department of Health review - a dual-agency process that adds 2-3 weeks and catches out-of-area contractors off guard.
The housing stock tells its own story. Most homes in The Acreage went up between 1985 and 2005, and their original doors are now 20-35 years old. We regularly find steel slabs rusting at the bottom from wet-season splashback, fiberglass skins delaminating from UV exposure on west-facing entries, and original jambs set without proper sill pans - a detail that wasn’t consistently enforced until the 2000s. The shallow water table, sometimes just 2-3 feet below grade, means grade-level doors sit in more hydrostatic pressure than east-county homes, accelerating threshold and sill rot.
Wind loading matters even inland. Loxahatchee sits outside the strictest coastal wind-borne debris zone, but gusts from tropical systems and afternoon thunderstorms still test poorly secured doors. We see garage-to-house doors that failed to latch properly during Hurricane Irma’s feeder bands, and we spec impact-rated or heavily reinforced units for any door that protects a conditioned space or serves as a safe-room access point. Homeowners often pair exterior door upgrades with Chain Link Fence in Loxahatchee or Vinyl Fence in Loxahatchee projects to lock down the full perimeter before storm season.
Finally, the large-lot, low-density character means our crew travels between tool staging and the house more than on compact suburban jobs. We build that into our scheduling, but it also means we can park a material trailer on-site without neighbor complications - useful when a custom Marvin or Pella unit arrives crated and needs protected storage before install.
Serving Loxahatchee, FL - Our Local Coverage Area
We’re based in the Loxahatchee area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Door Installation in Loxahatchee
Most door installations in Loxahatchee finish in one day; two days if we’re reframing the opening or waiting for paint to cure between coats. Custom or impact-rated units may add a week for material lead time. Call (844) 665-0162 and we’ll confirm your product’s availability.
Not for a like-for-like replacement in the same opening. You do need a Palm Beach County permit if you’re changing the opening size, converting to impact-rated from non-rated, or installing a new door where none existed. We’ll tell you during the estimate which path your job requires.
Yes, if we’re working in an existing opening. The door itself doesn’t involve plumbing or electrical. If you’re relocating the door to a new wall, we may need to reroute wiring or avoid plumbing stacks - something we map with a stud-finder and, if needed, a exploratory cut before quoting.
A standard prehung fiberglass unit in an existing, sound opening, with basic hardware and no trim upgrades. That typically hits the $450-$750 range in Loxahatchee. Going lower usually means slab-only reuse of a compromised frame, which we don’t recommend on 30-year-old homes.
The door manufacturer covers product defects - typically limited lifetime on fiberglass doors, 10-20 years on steel, 1-5 years on finishes. Our installation workmanship is warranted against leaks, operational failure, and hardware malfunction for the period we specify in your written estimate. We register your product warranty and leave you the documentation.
Get Your Free Estimate for Door Installation in Loxahatchee
We’ll come to your property in The Acreage or surrounding Loxahatchee, measure your opening, check the existing frame condition, and walk through material options from our curated brand roster - you choose what fits your home and budget, we handle the build. Call (844) 665-0162 to schedule. Most estimates take 30 minutes, and you’ll have a written quote within 24 hours.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Loxahatchee and South Florida homeowners from our Fort Lauderdale base.