Door Installation in Royal Palm Beach, FL: What It Costs and How Long It Takes
Door installation in Royal Palm Beach typically runs $1,200-$4,500 per opening for standard residential replacement, with most projects completed in one to three days depending on whether we’re swapping a slab or reframing the entire rough opening. Call (844) 665-0162 for a free on-site estimate and we’ll measure, spec, and price it while you watch. Most Royal Palm Beach homeowners who call us are dealing with original 1980s hollow-core interior doors that have warped in the humidity, or they’re finally replacing aging exterior doors that predate current wind-load requirements.
How We Handle Door Installation From First Measurement to Final Walkthrough
We’ve refined our process across hundreds of Royal Palm Beach projects, mostly in the village’s original 1970s-1990s neighborhoods where the same construction patterns repeat. Here’s what actually happens:
Stage 1: Site measure and opening assessment (30-60 minutes, day of estimate)
We measure the rough opening, not just the door slab. In Royal Palm Beach’s CBS homes, we check for settled framing, moisture intrusion at the sill, and whether the existing jamb is integral to the stucco finish. You’ll decide right then: same-size replacement or reframe for a larger unit. We photograph the opening, note any electrical or HVAC conflicts, and confirm whether we’re working with a standard 2/4 or 2/6 wall thickness. Most CBS construction here is 2/4 with 1-inch rigid foam, but we’ve seen variations.
Stage 2: Product selection and permit pull (3-7 business days)
You choose your door, frame material, and hardware. We handle Palm Beach County permitting, which is required for any exterior door replacement that changes the opening size or involves impact-rated product. Interior door swaps typically don’t need permits unless you’re in one of Royal Palm Beach’s stricter HOAs with architectural review requirements. We’ll know which applies based on your address. You approve the final shop drawing before we order.
Stage 3: Demo and prep (2-4 hours, day 1 of install)
We protect floors, remove the old unit, and expose the rough opening. In older Royal Palm Beach homes, this is where we often find the real work: rotted sill plate from years of splash-back, termite-damaged king studs, or original framing that’s out of plumb by half an inch. We call you over before proceeding if the scope changes. Demo includes responsible disposal; we haul the old door away same-day.
Stage 4: Installation and integration (3-6 hours, day 1 or extending to day 2)
We set the prehung unit or hang the slab, shim to plumb, and secure with appropriate fasteners for CBS construction. For exterior work, we integrate the new door with your existing weather barrier, which in Royal Palm Beach’s older stock is often minimal or degraded. We install proper sill pan flashing, backer rod, and sealant. Hardware goes in last. If you’re pairing this with Windows & Doors in Royal Palm Beach as part of a full exterior update, we sequence the work to maintain weather protection throughout.
Stage 5: Trim, paint, and final inspection (2-4 hours, final day)
Interior casing or exterior trim goes on, paint touch-up, and hardware adjustment. For permitted exterior work, we schedule Palm Beach County’s required inspection. You walk the job with us, we verify operation, weather-stripping compression, and lockset function. Final payment is due at substantial completion unless we’ve arranged milestone billing for a larger project.
The Door Choices You’ll Actually Decide Between
Every door installation in Royal Palm Beach involves trade-offs between cost, durability, and code compliance. Here’s what we see homeowners weighing:
- Slab-only vs. prehung unit: Slab replacement is cheaper ($150-$400 for the door, plus labor) but only works if your existing jamb is square, plumb, and undamaged. In Royal Palm Beach’s aging stock, we recommend prehung 80% of the time. Prehung runs $400-$1,200 for the unit plus installation, but you get a factory-aligned jamb, integrated sill, and warranty.
- Steel, fiberglass, or solid wood exterior: Steel is strongest for security and lowest cost ($300-$800), but dents and can rust at the bottom if splash-back is chronic. Fiberglass ($600-$1,500) mimics wood grain, won’t rot, and handles Royal Palm Beach’s humidity cycles well. Solid wood ($800-$2,500+) looks premium but requires maintenance; we rarely spec it for full sun exposures here.
- Impact-rated vs. standard exterior: If you’re in a designated wind-borne debris region or your insurance requires it, impact-rated doors with laminated glass are non-negotiable. They run 40-60% more than standard. Many Royal Palm Beach homeowners are upgrading to impact as part of insurance-mandated mitigation retrofits. Our Windows & Doors crew can coordinate this with window replacements.
- Hollow-core vs. solid-core interior: Hollow-core ($50-$150) is fine for closets and low-traffic bedrooms. Solid-core ($150-$400) dampens sound and feels substantial; we spec it for master suites, home offices, and anywhere you want privacy. MDF solid-core is standard; if you want paint-grade smoothness without grain telegraphing, it’s the right choice.
- Standard height vs. 8-foot or custom: Royal Palm Beach’s 1980s ranch homes typically have 6/8 doors. Taller units look contemporary but require reframing and often drywall repair above. Budget an extra $400-$800 for the reframe plus finishing.
What Door Installation Costs in Royal Palm Beach, FL
For door installation in Royal Palm Beach, expect to pay:
| Interior prehung, hollow-core, standard size | $350-$700 |
| Interior prehung, solid-core, standard size | $550-$1,100 |
| Exterior prehung, steel, non-impact | $1,200-$2,200 |
| Exterior prehung, fiberglass, non-impact | $1,800-$3,200 |
| Exterior impact-rated, fiberglass or steel | $2,800-$4,500+ |
| Reframe rough opening (add to above) | $400-$900 |
| Relocate plumbing/electrical in wall (if needed) | $500-$1,500 |
Five factors push your number up or down:
Existing condition of the opening. A clean swap into a square opening is straightforward. Settled framing, water damage, or termite repair adds $300-$1,200.
Wall thickness and construction type. Royal Palm Beach’s CBS homes with stucco exteriors require different trim integration than frame construction. Thick stucco returns or specialty trim add material and labor.
Permit and inspection scope. Exterior door replacements with reframe or impact rating require Palm Beach County permits ($150-$400 depending on valuation) and a scheduled inspection. We include permit fees in our written estimate.
Hardware and accessories. Builder-grade brushed nickel handles are standard. Smart locks, multipoint locking systems, or custom finishes add $200-$800.
Coordination with other trades. If your door installation is part of a larger project, say, alongside Chain Link Fence in Royal Palm Beach or Vinyl Fence in Royal Palm Beach for a full property refresh, we sequence efficiently. Standalone door work carries minimum mobilization costs.
Our written estimates include the door unit, installation labor, basic trim, hardware, permit fees if applicable, and haul-away. Paint, wall repair beyond the immediate opening, and electrical or plumbing relocation are typically separate unless specified.
What Royal Palm Beach’s Housing Stock Does to Every Door Job
Royal Palm Beach’s master-planned neighborhoods, from the original village core near Crestwood Boulevard to the later phases south of Southern Boulevard, present a remarkably consistent construction profile. Nearly every home is CBS on slab, built between 1975 and 1999, with original hollow-core interior doors and early aluminum-frame exterior units that are now past functional life.
The village-wide HOA infrastructure is the variable that surprises newcomers. Unlike neighboring Royal Palm Beach unincorporated areas such as The Acreage, where property owners face minimal exterior restrictions, Royal Palm Beach proper enforces architectural covenants through multiple master associations. Exterior door color, style, and sometimes even hardware finish require pre-approval. We’ve had jobs delayed two weeks because a homeowner submitted after ordering. We now pull HOA docs as standard practice before finalizing specs.
The insurance angle is equally specific to this market. Citizens Property Insurance and other carriers writing in Palm Beach County increasingly require proof of opening protection for renewal. A non-impact exterior door on a 1987 CBS home can trigger a deficiency notice. We’re seeing more Royal Palm Beach homeowners replace doors not because the old one failed, but because the inspector flagged it. The work then qualifies for wind mitigation credits that can offset the project cost over several renewal cycles.
Finally, the humidity. Royal Palm Beach sits inland but the water table is high and seasonal saturation is real. Exterior door sills without proper pan flashing and sealant detail fail prematurely. We spec marine-grade sealants and back dam details as standard, not upgrades.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Door Installation in Royal Palm Beach
Most standard door installations are completed in one day. A straightforward interior prehung swap takes 2-3 hours. Exterior replacements with trim integration run 4-6 hours. Jobs requiring reframe, stucco repair, or permit inspection extend to two or three days. Call (844) 665-0162 and we’ll give you a specific timeline for your opening.
Interior door replacements typically do not require permits. Exterior door replacements need a Palm Beach County permit if you’re changing the opening size, installing an impact-rated product, or altering the structural framing. We pull permits as part of our standard exterior door installation process and include the fee in your estimate.
Sometimes. If your desired wider door fits within the existing rough opening after removing trim, yes. If the rough opening itself needs expansion, we check for plumbing stacks, HVAC ducts, or electrical runs in the adjacent wall cavity. In Royal Palm Beach’s CBS construction, these are often surface-mounted or in soffits, which helps. We’ll know for certain after our site measure.
For interior hollow-core doors with minor cosmetic damage, repair can make sense. For exterior doors with compromised weather-stripping, warped frames, or non-impact glass in a wind-borne debris region, replacement is almost always the better investment. A new prehung exterior door with proper flashing solves the problems that band-aid repairs only postpone.
Our installation workmanship is warranted for one year. The door unit itself carries the manufacturer’s warranty, which varies by brand and product line, typically ranging from limited lifetime on fiberglass skins to 10-20 years on steel. Hardware warranties are separate and range from 5 years to lifetime depending on the manufacturer. We register all warranties and provide you the documentation at final walkthrough.
Get Your Free Door Installation Estimate in Royal Palm Beach
Call (844) 665-0162 to schedule a free on-site estimate for door installation in Royal Palm Beach. Raymond Estevez or a member of our project team will measure your opening, review your options, and deliver a written estimate with line-item pricing before we leave. Most estimates take 30-45 minutes. We’re available weekdays and Saturdays.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Royal Palm Beach and South Florida.