Kitchen Design & Layout in Lantana, FL - What It Costs and How Long It Takes
Kitchen design and layout in Lantana typically runs $14,000-$45,000 depending on whether you’re reconfiguring within existing walls or relocating plumbing, electrical, and structural elements. Most projects move from measured drawings to permit-ready plans in 2-4 weeks, with construction lasting 6-10 weeks after approvals. Call (844) 665-0162 and we’ll walk your space, pull the flood map, and give you a written estimate with no pressure.
How We Map Out a Kitchen Design & Layout Project, Start to Finish
We break every kitchen design and layout job into five clear stages. You know what you’re deciding, what we’re handling, and where the timeline can stretch or compress.
Stage 1: Site measure and as-built documentation (Day 1)
We show up with laser measures, a camera, and a checklist. We record every wall, window, door, soffit, and utility location. In Lantana’s 1950s-1970s CBS homes, we’re especially careful to note the electrical panel size and the slab elevation relative to grade. That same day, we pull the Palm Beach County property appraiser record and check the FEMA flood map for your parcel. If your assessed value is low and your renovation scope is broad, we need to know now whether we’re looking at a standard remodel permit or a substantial improvement trigger that forces flood-elevation compliance. You decide: are you open to relocating the sink, range, or island, or do you want to keep utilities where they are?
Stage 2: Conceptual layout and traffic-flow planning (Days 2-7)
We draft two or three layout options in CAD: typically a work-triangle variation, a galley-style efficiency plan, and an island-forward configuration if space allows. For Lantana’s smaller post-war kitchens, often 10×10 or 10×12, the island option sometimes requires stealing square footage from an adjacent laundry or Florida room. You decide: which layout fits how you actually cook and gather? We don’t move to refined drawings until you’ve settled on a direction.
Stage 3: Material and fixture selection (Days 8-14)
This is where the numbers harden. Cabinetry grade, countertop material, appliance package, and flooring selection drive 60% of the final cost. We bring samples to your home: door styles, quartz chips, tile boards. You decide: KraftMaid or Wellborn for cabinetry? Cambria, Silestone, or Caesarstone for countertops? We price each tier so you see the spread. This stage takes longer if you’re comparing appliance packages or if we need to source impact-rated windows as part of the scope.
Stage 4: Permit drawings and submission (Days 15-28, variable)
We produce structural, electrical, and plumbing plans to Palm Beach County’s current code, including wind-load and impact-rated opening requirements where the kitchen connects to exterior walls. For homes near the Intracoastal, we spec stainless or hot-dipped galvanized fasteners and hurricane strapping that won’t corrode in salt air. If your project triggers substantial improvement review, we add flood-elevation documentation and engineer sign-off. Permit turnaround in Palm Beach County is typically 10-15 business days for standard remodels, longer if flood compliance enters the picture.
Stage 5: Construction and final inspection (6-10 weeks)
Demo, rough-in, inspection, close-in, finish. We coordinate our own crews for carpentry and finish work; licensed trades handle electrical, plumbing, and mechanical. You do a walk-through at rough-in to confirm outlet and switch locations before drywall. Final inspection clears us for appliance hookup and your punch list.
The Layout and Material Choices That Move Your Price
- Keep utilities in place vs. relocate: Moving the sink, range, or dishwasher means new supply lines, drain runs, and venting. In Lantana’s older CBS homes with concrete slabs, relocating plumbing often requires cutting the slab and repouring, adding $2,500-$6,000. Keeping the “wet wall” where it is keeps you at the lower end of our range.
- Stock vs. semi-custom vs. custom cabinetry: Stock cabinets (KraftMaid’s standard lines) run $150-$300 per linear foot installed. Semi-custom with modified heights and depths pushes $400-$700. Fully custom, built-to-fit odd ceiling lines or integrated appliance panels, starts at $800. For Lantana’s 8-foot ceilings and occasional soffits, semi-custom usually solves the fit without the full custom premium.
- Quartz vs. granite vs. solid surface: Cambria and Caesarstone engineered quartz runs $75-$125 per square foot installed, non-porous and consistent in pattern. Natural granite varies more in slab availability and sealing requirements. Solid surface (Corian-type) costs less but scratches more easily. In a salt-air environment, none of these surfaces corrode, but the metal clips and brackets underneath do, so we spec stainless or coated supports.
- Island configuration: A fixed island with storage and overhang seating adds $3,000-$10,000 depending on size, electrical run for outlets, and whether we need to reinforce the slab. A peninsula attached to existing cabinetry costs less and avoids structural questions.
- Flooring continuity vs. transition: Running new tile or LVP continuous into adjacent living areas looks better but adds material and labor. Keeping a transition strip at the kitchen threshold saves 15-20% on flooring cost.
Homeowners often pair a kitchen design and layout overhaul with Vanities, Tile & Fixtures in Lantana to keep material palettes consistent across the house. And if you’re considering a Small Bathroom Remodels in Lantana, we can sequence both projects under one permit package and one crew rotation.
What Kitchen Design & Layout Costs in Lantana, FL
| Scope Level | Typical Range | What It Includes |
|---|---|---|
| Layout refresh, stock cabinets, surfaces in place | $14,000-$22,000 | Same-footprint redesign, stock or entry semi-custom cabinetry, quartz or laminate countertops, new backsplash, standard appliances |
| Mid-range reconfiguration, semi-custom, island add | $22,000-$35,000 | Relocated appliances or expanded footprint, semi-custom cabinetry, stone countertops, island with electrical, updated lighting plan |
| Full gut, custom cabinetry, structural changes | $35,000-$45,000+ | Wall removal or addition bump-out, custom cabinetry, premium stone, built-in appliances, permit-intensive flood compliance if triggered |
Five variables push you up or down this range. First, square footage: a 150-square-foot galley kitchen simply has less material cost than a 250-square-foot open plan. Second, utility relocation: every moved drain or gas line adds rough-in and inspection cycles. Third, material grade: the jump from entry quartz to Cambria’s designer lines is real. Fourth, structural work: removing a load-bearing wall requires an engineer’s letter and a beam package, typically $3,000-$8,000. Fifth, permit scope: if your project crosses Palm Beach County’s substantial improvement threshold, flood-elevation compliance can add $10,000-$30,000 in elevation, fill, or foundation work. That’s why we pull the flood map and assessed value before you sign anything.
A written estimate from us includes demolition, rough and finish carpentry, electrical and plumbing rough-in, cabinetry and countertop installation, flooring, backsplash, painting, and final cleanup. It does not include appliances, which you purchase separately and we receive and install; permit fees, which vary by scope; or temporary kitchen setup, which most homeowners handle with a microwave and folding table in the garage.
What Lantana’s Older Housing Stock Means for Your Kitchen Layout
Lantana’s homes, mostly built between the 1950s and 1970s, were designed for a different era of cooking and living. The typical kitchen we see on Hypoluxo Island or along Ocean Avenue is 100-140 square feet, closed off from the living area, with a single doorway and a window over the sink that may or may not be impact-rated. The electrical panel is often 100 amps, original to construction, with no room for a dedicated refrigerator circuit or GFCI protection. The slab sits at or slightly below Base Flood Elevation, especially west of Dixie Highway toward the Intracoastal.
This housing stock shapes what kitchen design and layout can realistically achieve. Opening the kitchen to the living room usually means dealing with a load-bearing wall and, if that wall contains original jalousie windows, replacing them with impact-rated alternatives per current Palm Beach County wind code. The salt air here is relentless; we’ve opened walls where the original galvanized hurricane straps were reduced to rust dust. We spec stainless or hot-dipped galvanized hardware on every project now, not as an upgrade but as baseline.
The flood-code dynamic is the one that catches homeowners off guard. A 1,200-square-foot CBS home near the water with an assessed value of $180,000 hits the substantial improvement threshold at $90,000 in construction costs. A kitchen design and layout project at $35,000, plus a roof replacement and a bathroom update, can push the 12-month cumulative total over that line. Once crossed, the permit becomes a new-construction flood event, and the finished floor must rise above Base Flood Elevation. We’ve seen contractors skip this check, get three months into a project, and have the county flag it at inspection. We pull the map and the numbers before we quote. It’s not extra service; it’s the minimum competence a Lantana project demands.
If your kitchen redesign is part of a full Kitchen Remodeling in Lantana that includes exterior work, our Kitchen Remodeling crew coordinates with our roofing and window teams so you’re not managing multiple contractors.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Kitchen Design & Layout in Lantana
Typically 8-14 weeks total: 2-4 weeks for design, permits, and material selection, then 6-10 weeks of construction. Flood-compliance projects or HOA review in waterfront communities like Hypoluxo Scrub can add 2-4 weeks. Call (844) 665-0162 and we’ll give you a realistic timeline for your specific property.
Yes, if you’re moving walls, utilities, or any structural element. Palm Beach County requires permits for electrical, plumbing, and structural changes; even cabinet replacement without utility work sometimes triggers review if impact-rated openings are involved. We handle permit submission as part of our scope. The permit fee is separate from our estimate and typically runs $500-$1,500 depending on valuation.
Often, yes, and that’s the most budget-friendly path. We can rotate the appliance triangle, add an island with a prep sink if you’re on a slab with accessible chase ways, or reconfigure storage and workflow within the existing wet wall. Keeping the sink, dishwasher, and range in place saves $2,500-$6,000 in rough-in costs. We’ll show you both options so you can decide.
We find out before you sign anything. We pull your FEMA flood zone designation and Palm Beach County assessed value during our first site visit. If the math is close, we design to stay under the 50% threshold or we price the elevation work upfront so there are no surprises. A contractor who doesn’t check this is gambling with your budget. Call (844) 665-0162 and we’ll run the numbers for your address.
Our workmanship is backed by a standard one-year warranty on installation and assembly. Cabinetry, countertops, and appliances carry their own manufacturer warranties, which we register for you. We use name-brand products specifically so those manufacturer warranties are real and transferable, not placeholder promises. If something fails, you call us, not a 1-800 number.
Get Your Kitchen Design & Layout Estimate in Lantana
We’ll walk your space, measure every wall, check your flood zone and assessed value, and deliver a written estimate with real numbers and a real timeline. No deposit to talk, no pressure to decide. Call (844) 665-0162 or fill out our contact form to schedule your free on-site consultation for kitchen design and layout in Lantana.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Lantana and South Florida homeowners since our founding.