Vanities, Tile & Fixtures in Lantana - Same-Day Service, Done Right the First Time

Vanities, Tile & Fixtures in Lantana: What’s Included, How Long It Takes, and What You’ll Pay

Vanities, tile & fixtures in Lantana covers the replacement of bathroom cabinetry, wall and floor tile, and all plumbing fixtures (toilet, faucet, shower valve, tub if kept) within an existing bathroom footprint. Most projects we handle in Lantana run 5 to 10 working days from demo to final inspection, with a typical investment of $9,000-$28,000 depending on material grade and whether plumbing stays put. Call (844) 665-0162 and we’ll walk through your specific layout - estimates are free and on-site.

Call (844) 665-0162

How We Handle Vanities, Tile & Fixtures from First Measurement to Final Walkthrough

This isn’t a full bathroom remodel. We’re not moving walls or reconfiguring the drain line. But the sequence still matters, especially in Lantana’s older CBS homes where what we find behind the tile often dictates the next step.

Day 1: Protect and demo. We tent the work area, shut water at the street if the original valve won’t hold, and strip tile, vanity, fixtures, and backing board down to the block or studs. In Lantana’s 1950s-1970s stock, we often find original cast-iron drains, corroded copper supplies, or prior handyman patches that need addressing before anything new goes in. This stage takes one day unless we hit a structural surprise.

Day 2-3: Rough plumbing and electrical. If you’re keeping the toilet, sink, and tub/shower in their existing locations, this is usually minor: new stops, maybe a pressure-balancing valve upgrade, and GFCI protection if the original circuit lacks it. If you want a wall-hung vanity or a vessel sink, we rough in the blocking and drain modification now. Homeowner decision point: do you want the medicine cabinet hardwired with LED, or battery-operated? Do you want a comfort-height toilet, which may require flange adjustment?

Day 4-6: Tile installation. Floor tile goes first, then wall tile after a 24-hour cure. In Lantana’s humid coastal air, we use modified thinset with extended open time and seal cementitious backer with a liquid membrane - the salt air here finds any gap. For shower walls, we specify porcelain or ceramic with a water absorption rate under 0.5%; natural stone looks beautiful but demands sealing every 6-12 months in this climate, and most homeowners we work with in 33462 prefer the lower maintenance. Grout day is day 6, with 24 hours before foot traffic.

Day 7-8: Vanity, fixtures, and trim. Vanity gets leveled on the newly tiled floor (critical - Lantana’s older slabs often have pitch issues), countertops templated if stone or quartz, fixtures set and pressure-tested. We run every joint, check for weeps in the shower pan if accessible, and verify the exhaust fan actually vents outside, not into the attic where we’ve found it in too many local homes.

Day 9-10: Paint, hardware, punch list, and inspection if required. Palm Beach County may want to see the plumbing and electrical if permits were pulled - more on that below. Final walkthrough with the homeowner, care instructions for grout and stone if applicable, and we collect the final draw.

You’ll make the most consequential decisions at two points: material selection before we order (2-3 week lead time for most vanities and tile), and layout confirmation at rough-in. Change orders after tile starts are expensive - we flag this early so there are no surprises.

The Material and Configuration Choices That Shape Your Bathroom

• Furniture-style vs. built-in vanity. Furniture-style pieces with legs work well in Lantana’s smaller 1950s bathrooms where a to-the-floor cabinet can feel heavy, but they offer less storage and may require wall reinforcement for the top. Built-in vanities with drawer stacks maximize storage in tight footprints. KraftMaid and Wellborn both offer semi-custom sizing that helps us hit odd dimensions without filler strips.
• Countertop material. Quartz (Cambria, Silestone, Caesarstone) resists etching and never needs sealing - worth the premium in a secondary bath that gets heavy use. Solid surface is repairable but scratches easier. Natural marble is stunning and we install it when asked, but we warn Lantana homeowners: the salt air plus hard water from the Floridan Aquifer leaves etch marks fast.
• Tile body and format. Large-format porcelain (12×24 or 24×48) minimizes grout joints and reads modern, but demands a flatter substrate - Lantana’s older slabs often need self-leveling compound, adding $400-$800. Subway tile is forgiving of wall irregularities and costs less installed, but the grout maintenance is real. For shower floors, mosaic sheets with more grout lines provide better slip resistance.
• Fixture finish and valve type. Brushed nickel and matte black hide water spots better than polished chrome in our hard water. Pressure-balancing valves are code-minimum; thermostatic valves cost more but hold temperature within 1 degree - worth it if this bath serves children or elderly family members.
• Toilet configuration. Standard 12-inch rough-in fits most Lantana homes, but we’ve found 10-inch and 14-inch in additions and prior renovations. Comfort height (17-19 inches to the seat) is increasingly standard; wall-hung carriers save floor space but require in-wall tank systems that add $600-$1,200.

What Vanities, Tile & Fixtures Costs in Lantana, FL

Five factors push you toward the high or low end of that range:

1. Existing condition. Demo that reveals rotten subfloor, active leaks behind tile, or galvanized plumbing that must be replaced adds $2,000-$6,000 quickly. We see this in roughly one-third of Lantana’s 1960s-1970s bathrooms.

2. Material grade. A big-box vanity with cultured marble top runs under $1,000 installed. A KraftMaid or Wellborn semi-custom cabinet with Cambria quartz and a frameless mirror can push $5,000-$7,000 for the vanity alone.

3. Tile complexity. Straight stack 12×24 on a flat wall is efficient. Herringbone patterns, niches, bench seats, or mosaic floors add labor hours and waste.

4. Plumbing relocation. Keeping everything where it is saves $1,500-$4,000. Moving a toilet flange or converting a tub to a curbless shower (not what this page covers, but adjacent) triggers structural and drainage work.

5. Permit scope. Palm Beach County requires permits for plumbing and electrical changes; if your project triggers flood-elevation review, costs and timeline extend. We pull the FEMA map and property appraiser records before quoting so this surfaces early, not mid-project.

Our written estimates itemize labor, material allowances, permit fees, and a contingency line for concealed conditions. What’s not included: homeowner-supplied fixtures (we warranty what we source), temporary bathroom arrangements, or post-project deep cleaning.

What Lantana’s Housing Stock and Coastal Position Mean for This Job

Lantana’s homes - mostly concrete block stucco built between the 1950s and 1970s, many within a few blocks of the Intracoastal - present specific conditions for vanities, tile & fixtures work that inland contractors sometimes miss.

The salt-laden air here corrodes exposed metal faster than you’d expect. We specify stainless or hot-dipped galvanized fasteners for every vanity anchor, cabinet hardware, and shower door track. Standard zinc-plated screws that hold up fine in Greenacres or Lake Worth can show rust within two years this close to the water. Same for the plumbing: brass and copper hold up, but we’ve replaced too many cheap chrome-plated angle stops that failed at the threads.

Electrical panels in this era’s housing stock are often 100-amp services with no spare capacity. Adding a heated floor, hardwired LED mirror, or towel warmer may require a subpanel upgrade - we check the load calculation during estimate, not after demo. And the original jalousie windows common in Lantana’s 1960s stock mean the bathroom may lack proper exhaust ventilation; we often recommend upgrading to a code-compliant vent fan (50 CFM minimum, ducted outside) as part of the fixture package.

The flood-code issue is real and specific to Lantana’s low-lying position. A straightforward vanities, tile & fixtures refresh rarely triggers Palm Beach County’s 50% substantial improvement threshold on its own. But if this work is part of a full Bathroom Remodeling in Lantana that includes flooring throughout, window replacement, and electrical upgrades, the cumulative cost can cross that line - especially on lower-assessed waterfront properties. We pull the property appraiser value and run the math before any contract is signed. A $15,000 bathroom on a $120,000 assessed home is 12.5%, no problem. The same job on a $220,000 home that’s simultaneously getting a roof and kitchen? That’s where we need to look carefully.

Homeowners in the Hypoluxo Island or Lantana Heights areas often pair interior updates with exterior work; we also handle Tile Roofing in Lantana and Specialty Roofing in Lantana for clients who want one contractor managing every phase. Our Bathroom Remodeling crew coordinates directly with our exterior teams when projects overlap.

We cover all of Lantana and the surrounding Lake Worth, Greenacres corridor - the 33462 ZIP and adjacent areas.

Frequently Asked - Vanities, Tile & Fixtures in Lantana

Ready to Update Your Lantana Bathroom?

Call (844) 665-0162 for a free, on-site estimate for vanities, tile & fixtures in Lantana. Raymond Estevez or a senior project lead will walk your space, measure, flag any concealed conditions we’ve learned to spot in local housing stock, and deliver a written estimate within 48 hours. No pressure, no deposit required to get started - just specific numbers you can compare.

Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Lantana and South Florida.