Patios, Walkways & Pool Decks in The Acreage, FL - Cost, Timeline & What to Expect
Patios, walkways, and pool decks in The Acreage typically run $3,500-$11,000 for paver patio installation, with pool decks and multi-surface walkway systems often landing in the higher half of that range depending on size and prep needs. Most projects we handle here take 5-10 business days from excavation to final sand-set, though the wet season can push start dates if the water table is running high. Call (844) 665-0162 and we’ll walk your lot, check drainage patterns, and give you a written estimate with line-item pricing.
How We Build Patios, Walkways & Pool Decks in The Acreage
We break every hardscape project into five clear stages so you know what’s happening, what you’re deciding, and when we’ll need access to the property.
Stage 1: Site walk and utility clearance (Day 1)
We mark out the footprint with you on-site, then call in a private utility locate if there’s any question about well lines, septic drain fields, or buried electrical runs to outbuildings. In The Acreage, that 1.25-acre spacing between structures, wells, and drain fields isn’t just good practice - it’s Palm Beach County setback law. We verify distances before we touch dirt. You’ll decide on final dimensions and surface elevation at this stage. This takes a half day.
Stage 2: Excavation and subgrade prep (Days 1-2)
We cut to depth - typically 7-9 inches for patios and walkways, deeper for vehicular pool decks if you’re running equipment over them. Here’s where The Acreage’s high water table matters: if we hit saturation within 18-24 inches of grade, we’ll bring in engineered fill and compact in lifts rather than risk a floating slab later. You’ll decide whether to add French drains or channel drains if we spot pooling patterns. This stage runs 1-2 days depending on access and soil conditions.
Stage 3: Base installation and compaction (Days 2-3)
We lay geotextile fabric, then build up with crushed concrete or limestone aggregate in 4-inch lifts, compacting each layer with a plate compactor. Pool decks get a thicker base - often 10-12 inches - because the freeze-thaw cycle isn’t the enemy here, but root intrusion and seasonal soil movement are. You’ll choose edge restraint type: concrete haunch, aluminum, or plastic, depending on whether you want a clean line or plan to plant against it. One to two days.
Stage 4: Paver laying and cutting (Days 3-5)
We set pavers to pattern, cut in borders and around pool coping, then check plane with a string line every few feet. Walkways get tighter joint spacing for foot traffic; pool decks get slightly wider joints with polymeric sand for drainage and to handle the chlorine wash-down. You’ll make the final call on any field cuts or pattern adjustments once you see the layout dry. Two to three days for most residential jobs.
Stage 5: Compaction, sanding, and seal (Days 5-6)
We vibrate the pavers into the bedding layer, sweep in polymeric sand, wet-activate it, and apply sealer if you’ve opted for it. Pool decks almost always get sealed - the salt and chlorine environment in The Acreage will etch unsealed concrete pavers within two seasons. We schedule your final walkthrough and cover maintenance timing. One day, with a 24-hour cure before foot traffic.
The Material Options You’ll Actually Choose Between
Not all pavers suit every application. Here’s what we most often quote for patios, walkways, and pool decks in The Acreage, with the honest trade-offs:
- Concrete pavers (Belgard, Tremron, Techo-Bloc): The standard for most patios and walkways. Run $4-$8 per square foot material-only. Hold color well in Florida UV, but unsealed surfaces will fade slightly by year five. Good for homeowners who want pattern variety without premium cost. We stock multiple thicknesses - 60mm for foot traffic, 80mm if you’re running light equipment across a pool deck pad.
- Natural stone travertine: Stays cooler underfoot than concrete, which matters for pool decks in The Acreage where there’s little shade on open acreage lots. Runs $8-$14 per square foot material. Porous, so it needs sealing every 18-24 months. Best for homeowners prioritizing barefoot comfort and a softer aesthetic. We source from quarries with consistent veining to avoid the patchwork look.
- Porcelain pavers: Near-zero water absorption, so they won’t stain from pool chemicals or the iron-rich well water common in The Acreage. $10-$16 per square foot. Thinner profile (20mm) means they install faster but require a perfectly flat base - any waviness telegraphs through. Ideal for modern pool decks with clean sight lines.
- Permeable paver systems: Required by some newer Palm Beach County developments for stormwater management. Higher upfront cost ($6-$12 per square foot) but eliminates runoff issues on properties where the water table already sits high. We open-grade the base and skip the fines so water percolates through. Worth considering if your lot has seasonal standing water.
- Pool coping options: Bullnose concrete, travertine, or porcelain - each matched or contrasted to the deck field. You’ll decide on overhang depth (typically 1.5-2 inches) based on your pool shell edge and whether you want a seamless pour or a defined border.
We don’t push one material over another. We lay samples on your actual dirt, let you walk them in afternoon sun, and quote from there.
What Patios, Walkways & Pool Decks Cost in The Acreage, FL
For paver patio installation in The Acreage, expect $3,500-$11,000. Pool decks and multi-surface walkway systems with steps, lighting, or retaining elements typically land at $7,500-$18,000.
Five variables move you up or down that range:
- Square footage and shape complexity: A 200-square-foot straight patio at grade is at the low end. A 600-square-foot pool deck with radius cuts, raised planters, and integrated steps pushes toward the top.
- Existing condition and demo: Removing old concrete, dealing with tree roots, or hauling off a previous deck adds $1,000-$3,500. We price this separately so you see it.
- Material grade and source: Standard concrete pavers versus imported travertine or large-format porcelain can double material cost alone.
- Drainage and fill requirements: Properties near the Loxahatchee Slough with seasonal saturation may need 6-12 inches of engineered fill and geogrid. That’s labor and material that flat, well-drained lots don’t need.
- Permit scope and inspections: Palm Beach County requires permits for pool decks and any hardscape over 120 square feet attached to the home. We pull permits, but the schedule depends on inspector availability - and in The Acreage, that means planning around drive times.
Our written estimates include: materials, base prep, labor, edge restraint, polymeric sand, and one-year workmanship coverage. They do not include: tree removal, well or septic relocation, irrigation repair, or permit fees (typically $150-$400 for this scope).
What The Acreage Specifically Does to This Job
The Acreage isn’t Royal Palm Beach or Wellington, and building here means respecting that difference from the first shovel.
Every lot sits on 1.25 acres with private well and septic - no municipal hookups. That means your patio or pool deck can’t encroach on setback lines between your home, wellhead, and drain field. We’ve seen homeowners buy paver materials from big-box stores only to learn their dream pool deck violates county separation requirements. We measure first, design second.
The housing stock here is overwhelmingly CBS construction from the mid-1980s through early 2000s. Many of those homes are now hitting the age where original pool decks have cracked from root intrusion or poor base prep, and original patios were poured as thin slabs without reinforcement. We demo more failing concrete in The Acreage than in most Palm Beach County markets - not because the work was bad originally, but because thirty years of Florida sun and seasonal water table fluctuation expose every shortcut.
Permits pull through Palm Beach County’s unincorporated office, not a city hall. Inspectors cover a sprawling grid with long distances between calls. Locals know to schedule early in the week; a Thursday inspection request can slip to Monday if routing doesn’t work out. We build that buffer into our timelines so you’re not waiting on a county truck while your base sits exposed.
The water table sits 18-24 inches below grade through the wet season. That doesn’t stop work, but it changes how we prep. We bring in fill earlier, compact more aggressively, and sometimes delay starts by a few days if a heavy rain event just saturated the subgrade. Rushing this stage guarantees settling and lippage within two years.
Serving The Acreage, FL - Our Local Coverage Area
We’re based in the The Acreage area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Patios, Walkways & Pool Decks in The Acreage
Most patios, walkways, and pool decks we build in The Acreage take 5-10 business days from excavation to completion, assuming Palm Beach County inspections stay on schedule. Pool decks with custom coping or integrated steps tend toward the longer end. We’ll give you a fixed timeline with your written estimate, and we don’t start until permits are in hand.
Yes, if the hardscape exceeds 120 square feet or attaches to your home. Pool decks always require permitting in Palm Beach County. We handle the application, the drawings, and the inspection scheduling. Because The Acreage is unincorporated, everything routes through the county - and inspector drive times mean we book early-week slots whenever possible. Call (844) 665-0162 and we’ll confirm whether your specific scope triggers permitting.
Almost always, yes - The Acreage’s 1.25-acre lots typically provide enough separation that we can design around existing wellheads and drain fields without relocation. We verify setback distances during our site walk before we finalize any layout. Moving a well or septic is rare for patio and pool deck scope; if it’s necessary, we’ll flag it immediately and price it separately.
Repairing cracked, settled concrete is usually a short-term fix that costs 40-60% of replacement but lasts half as long. For pool decks in The Acreage with root damage or base failure, we typically recommend full removal and proper paver installation - the freeze-thaw risk is low here, but seasonal water table movement will reopen patched cracks within a season or two. We’ll quote both paths honestly if you want to compare.
We back our workmanship with a one-year coverage on base prep, drainage, and installation quality. Material warranties come from the manufacturer - Belgard, Tremron, and Techo-Bloc each carry their own product guarantees against defect. Sealer applications, if you opt for them, typically carry a separate 2-3 year performance warranty from the sealer manufacturer. We document all of this in your project folder before we start.
Get Your Free On-Site Estimate in The Acreage
We’ll walk your lot, check drainage, verify setback clearances, and leave you with a written estimate that breaks out materials, labor, and timeline. No deposit to schedule the visit. Call (844) 665-0162 or reach out through our The Acreage service page. If you’re also considering a full outdoor overhaul, our Driveway & Pavers in The Acreage page covers the complete hardscape scope, and our Driveway & Pavers crew handles everything from entry drives to pool surrounds. Many homeowners tackling exterior work pair this with ADU Site Prep & Utilities in The Acreage or wrap it into a larger renovation with Full Kitchen Remodeling in The Acreage - one contractor, every phase, built to spec.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving The Acreage and South Florida.