Sliding & Patio Doors in Hollywood, FL - Timeline, Cost, and What to Expect
Sliding and patio door installation in Hollywood typically runs $4,500-$15,000 depending on size, material grade, and whether you’re replacing an existing unit or cutting a new opening. Most retrofits we handle in Hollywood take 1-2 days once materials arrive; new openings or structural modifications add 3-5 days including inspection scheduling. Call (844) 665-0162 and we’ll walk through your exact opening, show you the brand options that carry Miami-Dade NOA approval for this HVHZ zone, and put together a written estimate with no obligation.
Hollywood’s mix of 1960s concrete block bungalows and 1990s planned-community homes means we’re often fitting modern sliding systems into openings that weren’t built for today’s frame depths or impact-rated glass thickness. The job isn’t just about the door itself - it’s about matching the assembly to the wall construction, the exposure, and the permit path.
How We Handle Sliding & Patio Doors - Start to Finish
We’ve refined this into five clear stages so you know what’s happening and when you need to make decisions.
Stage 1: Opening assessment and measurement (Day 1, 1-2 hours)
We measure the rough opening, check the header condition, and determine whether we’re working with a standard 6-foot or 8-foot slider, a multi-panel wall system, or converting a window to a door. In Hollywood’s older CBS homes near Hollywood Boulevard and Federal Highway, we regularly find original steel lintels with corrosion bleed - something that has to be addressed before the new frame goes in. You’ll decide at this stage whether you want to keep the existing opening size or expand it, which triggers structural engineering.
Stage 2: Product selection and permit submission (1-2 weeks lead time)
This is where you choose frame material, glass package, hardware finish, and screen type. We spec from Andersen, Pella, Marvin, Milgard, Jeld-Wen, Simonton, PGT, and CGI - all with HVHZ-listed options. For Hollywood’s barrier island homes in 33019, we typically steer toward aluminum-clad wood or thermally broken aluminum with stainless fasteners to fight salt-air corrosion. We submit permits to Broward County with Miami-Dade NOA documentation; standard replacements move faster, new openings require structural plans.
Stage 3: Demo and rough prep (Day 1 of install, 3-6 hours)
We remove the old unit, protect flooring, and expose the rough opening. If we’re dealing with post-Andrew construction in western Hollywood ZIPs like 33029, the framing and moisture barrier are usually straightforward. In 33020 and 33021, we often find original stucco returns that need re-tying and supplemental flashing to meet current HVHZ attachment schedules. You’ll see the condition before we proceed - no hidden surprises.
Stage 4: Installation and weather sealing (Day 1-2, 6-10 hours)
The new frame gets leveled, shimmed, and fastened per the NOA fastener schedule - typically #10 or #12 stainless screws at 6-inch centers into the concrete block or wood framing. We flash the pan, seal the perimeter with backer rod and polyurethane, and install the operable panels. For impact-rated units, we verify the laminated glass label matches the NOA. You test the operation before we move to finish.
Stage 5: Trim, interior finish, and inspection (Day 2-3, 3-5 hours)
We install interior casing or drywall return to match your existing, address any stucco patching on the exterior, and clean the site. Broward inspectors verify NOA compliance, fastener spacing, and egress operation. We don’t consider the job closed until you sign off on smooth roll, clean lock engagement, and proper drainage.
The Sliding & Patio Door Options You’ll Actually Choose Between
Every decision affects price, maintenance, and how the door performs in Hollywood’s specific conditions. Here’s what the choice looks like in practice:
- Vinyl frames ($-$$) - Best thermal performance for the dollar, zero paint maintenance, but limited color options and thinner wall sections that can feel less substantial on large openings. We see these spec’d most often in western Hollywood tract homes where the HOA doesn’t mandate a specific exterior look. Not ideal for direct oceanfront exposure in 33019.
- Aluminum frames ($$-$$$) - Strong, slim sightlines, excellent for maximizing glass area. Standard aluminum corrodes in salt air; we only spec thermally broken aluminum with anodized or Kynar finishes for Hollywood’s coastal zone. PGT and CGI both make HVHZ-rated aluminum sliders that hold up on the barrier island.
- Aluminum-clad wood ($$$-$$$$) - The interior wood warmth with exterior aluminum protection. Marvin and Andersen both offer HVHZ-listed options. Higher maintenance than vinyl, but the aesthetic upgrade is significant and the thermal break performs well. Popular in Hollywood Hills and Emerald Hills renovations where the interior finish matters.
- Impact vs. non-impact glass (+$800-$2,500 per unit) - Hollywood’s HVHZ status means impact-rated laminated glass is required for most replacements unless you’re pairing with approved shutters. We almost always spec impact glass; the incremental cost is offset by eliminated shutter maintenance and the structural confidence it provides.
- 2-panel vs. multi-slide vs. lift-slide ($$$-$$$$$) - Standard 2-panel sliders handle 6-8 foot openings. Multi-slide systems stack or pocket for 12-20 foot walls; lift-slide hardware (Marvin, Pella) reduces operating effort on heavier panels. These upgrades make sense for Hollywood homes doing full rear-wall renovations or pool-area openings.
- Screen options - Standard fiberglass mesh, BetterVue for visibility, or retractable screens that store in the jamb. Retractables add $400-$900 but eliminate the visual clutter of a fixed screen - worth considering for homes where the door faces the Intracoastal or a landscaped courtyard.
What Sliding & Patio Doors Cost in Hollywood, FL
For the Hollywood market, sliding and patio door installation ranges from $4,500 for a standard vinyl 2-panel replacement to $15,000+ for a multi-slide aluminum-clad system with impact glass and integrated retractable screens.
| Project Type | Typical Range |
|---|---|
| Standard 6 ft vinyl slider replacement | $4,500 - $6,500 |
| 8 ft aluminum thermally broken, impact glass | $7,500 - $10,500 |
| Aluminum-clad wood, impact rated | $9,000 - $13,000 |
| Multi-slide or lift-slide system (12+ ft) | $12,000 - $15,000+ |
| New opening cut (structural, with permits) | Add $3,000 - $6,000 |
Five factors push you toward the high or low end:
1. Existing condition of the opening. A clean replacement into a post-1992 frame with intact moisture barrier moves fast. A 1960s CBS opening with corroded steel lintel, failed stucco returns, or water intrusion into the block cells adds demo and remediation.
2. Structural modification. Widening an opening requires a new header sized for HVHZ wind loads - engineered drawings, permit revision, and inspection. We see this most in east Hollywood ranch conversions where homeowners want to open the rear wall to a pool deck.
3. Material grade and brand tier. A Simonton vinyl slider with impact glass sits at a different price point than a Marvin aluminum-clad lift-slide. Both are legitimate choices; the right one depends on your exposure, aesthetic goals, and how long you plan to own the home.
4. Glass specification. Impact-rated laminated glass with Low-E and argon fill is standard for us in Hollywood, but upgrades to triple-pane, tinted, or patterned glass add cost. The barrier island’s direct sun exposure makes Low-E coating worth the incremental spend for energy performance.
5. Permit scope and inspection path. Standard replacement permits in Broward run $150-$400. New openings or structural modifications trigger plan review fees and extended timelines. The Miami-Dade NOA documentation requirement means we can’t substitute a standard Florida Product Approval - the materials have to be right from the start.
Our written estimates include the door unit, hardware, installation, flashing, trim, permit fees, and cleanup. What’s typically separate: stucco or siding repair beyond the immediate opening, interior drywall or flooring remediation, and any electrical relocation for nearby switches or outlets.
What Hollywood Homes Specifically Do to This Job
Hollywood sits entirely within Florida’s High Velocity Hurricane Zone, sharing that designation only with Miami-Dade County. Every sliding or patio door we install here must carry a Miami-Dade Notice of Acceptance with explicit HVHZ listing - a requirement invisible on standard Florida Product Approval searches. Contractors coming from Palm Beach County or Orlando routinely get caught at the Broward permit desk when their spec’d materials lack this certification, killing schedules by weeks while replacements are sourced. We verify NOA compliance before we quote.
The housing stock splits the job type. In eastern and central Hollywood - the 33020, 33021, 33023 ZIPs along Federal Highway and south toward Hollywood Boulevard - we’re working on 1950s-1970s CBS homes built for the Northeast snowbird market. These often carry original jalousie windows, steel sliders with corroded tracks, and openings that predate modern impact requirements. The work is remediation and upgrade: removing failing units, addressing block moisture intrusion, and installing HVHZ-compliant assemblies that weren’t imagined when the home was built.
West of I-75 in 33024-33029, the 1980s-2000s planned communities present cleaner replacements into standard openings with current framing. But even here, the salt-air exposure from the Atlantic - particularly for homes with pool decks that channel wind-borne moisture - drives us toward stainless fasteners and anodized or Kynar finishes over standard painted aluminum.
For the barrier island strip in 33019, separated from the mainland by the Intracoastal Waterway, Florida’s Coastal Construction Control Line adds a DEP permit layer that inland Broward projects never see. We’ve learned to factor that timeline into projects on Ocean Drive or the side streets between A1A and the water. The corrosion rate on standard aluminum framing there forces shorter replacement cycles; we spec accordingly.
Homeowners in Hollywood often pair exterior door upgrades with Iron Fence in Hollywood installations for pool enclosures, or Fence Repair in Hollywood when they’re addressing the full property perimeter. If you’re considering sliding and patio doors as part of a full exterior envelope project, see our broader Windows & Doors in Hollywood scope page, or explore how our Windows & Doors crew coordinates with roofing and siding work across Hollywood and neighboring areas.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Sliding & Patio Doors in Hollywood
Most replacements finish in 1-2 days once materials arrive. New openings or structural modifications take 4-7 days including Broward permit scheduling and inspection. Call (844) 665-0162 and we’ll confirm your specific timeline after seeing the opening.
Yes. Broward County requires permits for all door replacements, and HVHZ-listed products with Miami-Dade NOA documentation are mandatory. We handle permit submission, plan review coordination, and inspection scheduling as part of our standard process.
Often yes, if you’re staying within the existing structural bay. We regularly expand 6-foot openings to 8 feet without touching utilities. Moving beyond the bay or cutting into a wall with interior plumbing stacks requires relocation - we’ll flag that in the initial assessment before you commit.
Impact-rated glass adds roughly $800-$2,500 per opening depending on size. In Hollywood’s HVHZ zone, non-impact glass paired with shutters is technically permissible but rarely practical; the shutter maintenance and aesthetic compromise make impact glass the better long-term value for most homeowners.
Manufacturer warranties on the door unit typically run 10-20 years on frames and 20 years on glass, depending on brand and tier. Our installation workmanship is covered for the period specified in your written estimate. We register all warranty documentation with the manufacturer and provide you copies for your records.
Ready to Move Forward on Your Sliding & Patio Doors?
Call (844) 665-0162 to schedule a free on-site estimate in Hollywood. We’ll measure your opening, assess the wall condition, show you the HVHZ-approved options that fit your exposure and budget, and deliver a written estimate with no pressure. Most estimates go out within 24 hours of the visit.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Hollywood and South Florida homeowners since our founding.