Fast, Reliable Windows & Doors Across Margate
Window and door replacement in Margate typically runs $4,500-$25,000 depending on whether you’re updating standard vinyl units or upgrading to full hurricane-impact systems across a 1970s CBS ranch. Most Margate projects we handle are completed in 2-5 days once materials arrive, with permits pulled through Broward County’s strict post-Andrew code cycle. Call (844) 665-0162 for a free, on-site estimate - we measure, spec, and coordinate HOA approvals so you don’t have to juggle multiple points of contact.
We’ve worked the length of Margate Boulevard, from the 55+ communities near Oriole Golf Course down through the PUDs off Atlantic Boulevard, and the pattern is remarkably consistent: original aluminum sliders, hollow-core block construction, and HOAs that want advance notice before any exterior alteration. That repetition is actually an advantage. A crew that knows the standard 1970s window buck sizes and door jamb depths in these homes can quote impact replacements with near-zero field surprises, which matters especially for seasonal residents who need the job done right before they head north for the summer.
Why Groundwork Construction Co. of South Florida Is Margate’s Preferred Windows & Doors Company
Raymond Estevez built Groundwork on the idea that homeowners deserve one accountable team and genuine material choice, not a contractor who pushes whatever’s in the warehouse. In Margate, that means we show up with Andersen, Pella, Marvin, and Milgard samples, plus impact-rated options from PGT and CGI that satisfy Broward County’s wind-load requirements. You choose the brand, we handle the build.
Our response time to Margate runs same-day or next-day for consultations, since we’re based in Fort Lauderdale and regularly route crews through the Coral Springs-Margate corridor. We’ve replaced windows in the Coral Bay Villas, updated sliders in the Palm Springs 55+ community, and handled full impact conversions in the townhouse clusters off Rock Island Road. That density of local work means our permit expediters know Broward County’s inspection schedule, and our crews don’t waste time figuring out whether your home has the 5⅝-inch or 7¼-inch window buck common to that era.
Seasonal residents particularly value this predictability. You’re not here to babysit a construction crew. We coordinate HOA submissions, schedule inspections around your travel dates, and install battery-backup hardware where it makes sense for homes that sit vacant four months a year.
Our Windows & Doors Services in Margate
Window Installation
New window installation in Margate almost always means removing original 1970s aluminum single-pane units and upgrading to vinyl or impact-rated frames that meet current code. The flat, low-slab construction common here means sill pan flashing has to handle intense rain events without drainage backup - a detail we spec differently than we would for homes on higher, sloped sites in Coral Springs or Parkland. In Margate’s 55+ communities, we also prioritize smooth-operating hardware and easy-clean tilt-in designs for second-story units.
Door Installation
Entry door replacement in Margate runs into the same HOA notification requirements as windows, particularly in planned communities where front elevations must maintain visual consistency. We handle fiberglass and steel options from Jeld-Wen and Therma-Tru that replicate the original door profiles while adding impact glass and reinforced jambs. For interior doors, the 1970s hollow-core slabs common here are straightforward swaps, though we often widen openings for accessibility upgrades requested by aging-in-place residents.
Window Replacement
A typical window replacement project in Margate costs $4,500-$15,000, with most 1,200-square-foot CBS ranches falling in the $7,000-$11,000 range for standard vinyl double-hungs. The value proposition here is straightforward: original single-pane aluminum frames leak conditioned air, allow moisture intrusion that warps tracks and robs jambs, and offer zero protection in a storm. We replaced a single-story CBS ranch’s original aluminum sliders with impact-rated units in the Margate PUDs off Margate Boulevard, coordinating with the HOA and sizing the windows to the neighborhood’s standard 1970s openings. Our techs used belt-drive openers with battery backup and simple keypads for the owner, who’s away in Pittsburgh for four months each year, so the home stays closed up but accessible and secure.
Impact Windows & Doors
Impact window installation in Margate runs $8,000-$25,000 for a full-home conversion, and it’s not optional on any permitted job. Broward County’s post-Hurricane Andrew building code requires wind-load compliance on all structural alterations, which means original non-impact windows must be replaced with rated products that pass missile-impact and cyclic pressure testing. We source from PGT, CGI, and Andersen Stormwatch lines, with options ranging from standard white vinyl to architectural-grade aluminum clad in bronze or black finishes that satisfy HOA color restrictions.
Impact sliding glass doors are a particular focus in Margate, where the 1970s floor plans typically feature 6-foot or 8-foot patio openings leading to screened lanais. These original units are almost always non-impact, single-pane aluminum with corroded rollers and failed weatherstripping. Our replacements include heavy-duty stainless steel roller systems and multi-point locking hardware that meets both code and insurance requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We don’t stock proprietary products or push whatever’s moving slow in the warehouse. Our Windows & Doors team works with Andersen, Pella, Marvin, Milgard, Jeld-Wen, Simonton, PGT, and CGI - eight distinct product lines spanning mainstream vinyl through architectural-grade wood and aluminum, plus Florida-specific impact-rated systems. For Margate homeowners, this means you can match a budget-friendly Simonton double-hung in a rental property with a PGT WinGuard impact slider in your primary residence, all through the same contractor relationship. We maintain local supplier relationships in Broward County, so most standard sizes arrive in 2-3 weeks rather than the 6-8 week lead times common for special-order architectural units.
Common Windows & Doors Problems We See in Margate Homes
- Fine sand and moisture infiltration under original single-pane sliders. Margate’s flat terrain and intense rain events drive water and grit under the worn weatherstripping of 1970s aluminum sliders, warping tracks and causing sticking that gets worse every wet season. The original design never accounted for decades of UV degradation on vinyl glazing beads and corroded aluminum frames.
- Cracked original glass and rotted wood jambs on CBS homes with added trim. Many Margate ranches had wood jamb extensions added during 1980s or 1990s renovations, and these have succumbed to termites and moisture while the concrete block itself remains sound. The cracked single-pane glass is a safety hazard and a guaranteed wind-load failure point in any storm.
- Non-impact windows and doors that fail current Broward County code. When you sell or refinance, the buyer’s inspector and their insurance underwriter will flag original non-impact glazing. We’ve seen deals delayed because a seller didn’t realize their 1972 sliders needed full replacement to satisfy current wind-load requirements.
- HOA coordination gaps in PUDs and 55+ communities. Margate’s planned developments require architectural review before exterior alterations, and some boards meet only monthly. Starting the HOA packet before ordering windows prevents the 4-6 week delays that strand homeowners with open walls and pending inspection schedules.
Pricing for Windows & Doors in Margate, FL
These are the ranges we see on actual Margate projects, accounting for Broward County permit fees, wind-load engineering, and the standard 1970s opening sizes that predominate here:
| Service | Typical Range in Margate |
|---|---|
| Window Replacement (standard vinyl) | $4,500 - $15,000 |
| Impact Window Installation (full home) | $8,000 - $25,000 |
What moves you within these ranges? Frame material (vinyl vs. aluminum clad vs. wood), glass package (standard double-pane vs. impact-rated laminated), and the condition of existing openings. A 1970s CBS ranch with original aluminum in standard sizes and sound block framing sits at the lower end. Custom shapes, enlarged openings, or homes with deteriorated wood bucks requiring reframing push toward the higher end. We don’t quote over the phone - every Margate home needs field measurement to confirm buck size, squareness, and structural condition. Estimates are free. Call (844) 665-0162 to schedule.
We Also Serve Cities Near Margate
Our crews route daily through the central Broward corridor. We handle Windows & Doors in Margate and neighboring Pompano Beach, Coconut Creek, North Lauderdale, and Coral Springs with the same pattern knowledge of mid-century CBS construction and Broward County’s unified building code. Whether you’re in a 1960s Pompano Beach bungalow or a 1980s Coral Springs two-story, the permit process and wind-load requirements are consistent - and so is our approach.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Windows & Doors in Margate
Yes, nearly all Margate planned communities and 55+ developments require architectural review committee approval before exterior window or door changes. We prepare the HOA packet with product cut sheets, color samples, and installation details as part of our standard process, and we recommend submitting 30-45 days before your target install date since many boards meet monthly. Call (844) 665-0162 and we’ll walk through your specific community’s requirements during the estimate.
No, original 1970s aluminum frames in Margate’s CBS homes are not structurally rated for impact loads and must be fully removed. The replacement includes new impact-rated frames anchored to the concrete block with stainless steel fasteners, plus sill pan flashing and proper drainage that the original installation lacked. This is why a full replacement costs more than a retrofit - but it’s also why it passes Broward County inspection and qualifies for insurance discounts.
Original non-impact windows left unattended degrade faster than occupied homes because there’s no climate control fighting humidity, and small leaks go unnoticed until they cause jamb rot or interior damage. For seasonal residents, we recommend completing impact replacement before the home is closed up for summer - the laminated glass and sealed frames handle temperature swings and storm pressure far better than original single-pane units. Our battery-backup keypad entry systems also let property managers or family access the home without spare keys sitting in mailboxes.
All door replacements in Margate require a Broward County building permit if they’re exterior units, and PUDs add the HOA architectural layer but not a separate municipal permit. The county inspector will verify impact rating, proper fastening to block, and egress compliance on bedroom doors. We pull permits as part of every project and schedule inspections around your availability - critical for snowbirds who need the job finished before travel dates.
A typical 1,200-1,500 square foot 1970s Margate ranch with standard-sized openings runs $7,000-$14,000 for vinyl replacement windows, or $12,000-$22,000 for full impact-rated conversion. The 1970s construction actually helps control costs - the uniform window buck sizes and absence of custom shapes mean we can use stock sizes rather than special-order units. Call (844) 665-0162 for an exact quote based on your home’s specific opening count and condition.
Written by Raymond Estevez, Owner at Groundwork Construction Co. of South Florida, serving Margate and central Broward County homeowners with full-scope residential construction since our founding.