Fast, Reliable Kitchen Remodeling Across Margate
Kitchen remodeling in Margate typically runs $14,000-$45,000 for a full renovation, and most projects take 6-10 weeks from permit to final inspection. We serve Margate from our Fort Lauderdale base, and our crews know the city’s 1965-1978 CBS slab homes inside out - the 100-amp panels, the galvanized plumbing, the identical floor plans repeated across Oriole Estates and the 55+ communities near Atlantic Boulevard. If you’re planning a kitchen overhaul in Margate, call (844) 665-0162 for a free estimate. We’ll walk your job site, flag the code issues before demolition starts, and schedule every trade so you’re not living with a torn-up kitchen for months.
Why Groundwork Construction Co. of South Florida Is Margate’s Preferred Kitchen Remodeling Company
We’ve remodeled kitchens across Margate’s planned communities and villa neighborhoods, from the original ranch homes off Rock Island Road to the townhome clusters near Margate Boulevard. Our customers here tend to be direct - they want one contractor who handles the electrical upgrade, the plumbing repipe, and the finish carpentry without passing blame between subs.
That single-source approach matters in Margate because these homes share DNA. The same developer floor plans repeat block after block. When our team learns where the galvanized stubs run in a 1973 CBS ranch, we know what the next three neighbors’ walls hold too. That pattern knowledge saves days of exploratory demolition and protects your budget from surprises.
We’re also realistic about Margate’s permit environment. Broward County’s post-Hurricane Andrew wind-load code is among the strictest in the nation. Any structural alteration - even removing a non-load-bearing wall - triggers inspections that add time but protect your home’s insurability and resale value. We build that timeline into every estimate so you’re not caught off guard.
Raymond Estevez, who leads Groundwork Construction Co., personally reviews every Margate kitchen remodel before it hits the permit desk. That oversight means your plans pass inspection the first time, not after costly revisions.
Our Kitchen Remodeling Services in Margate
Full Kitchen Remodeling
A full kitchen remodel in Margate starts with what you can’t see. In a 1972 CBS ranch near Coconut Creek Parkway, that means verifying whether your 100-amp panel can handle a modern appliance package, and whether galvanized supply lines behind the drywall need replacement before the first cabinet goes in. We handle the full scope - demolition, electrical and plumbing rough-in, drywall, flooring, cabinetry, countertops, backsplash, and final trim - with one project manager accountable from start to finish. Our Kitchen Remodeling team coordinates every trade so you’re not chasing five different contractors through your living room.

Cabinets & Countertops
We don’t lock you into a single cabinet line. In Margate, we install KraftMaid and Wellborn cabinetry across multiple price tiers, from stock options that refresh a rental kitchen to semi-custom layouts with soft-close drawers and pull-out pantries. For countertops, Cambria, Silestone, and Caesarstone engineered quartz handle Margate’s humidity better than porous natural stone - no sealing, no staining, no swelling when the afternoon thunderstorms spike indoor moisture. Granite remains available for homeowners who want the veining and don’t mind annual maintenance. You choose the brand and material; we template, fabricate, and install to spec.

Kitchen Design & Layout
Design in Margate works within real constraints. Those 1970s kitchens were compact - often 10×10 or 12×12 with minimal wall space for cabinetry. We reconfigure layouts to gain function without blowing out structural walls that trigger wind-load re-engineering. Island additions are popular in Margate’s open-concept conversions, but we check floor slab conditions first; that high water table means drain runs for prep sinks need proper venting and grade, or you’ll fight sewer gas and slow drains forever. Our design process includes a structural review before you fall in love with a layout we can’t permit.

Backsplash, Tile & Flooring
Florida humidity kills cheap materials. We specify porcelain tile and luxury vinyl plank rated for high-moisture environments, with mortar and adhesive systems that won’t release when Margate’s summer humidity climbs past 80 percent. Backsplash installation runs $800-$2,500 depending on tile selection and linear footage. For flooring, we remove original vinyl or terrazzo, assess the slab for moisture intrusion, and install products that won’t buckle when the afternoon storms roll through.

Small & Partial Kitchen Remodels
Not every Margate kitchen needs a gut job. Cabinet refacing, countertop replacement, and appliance upgrades refresh the space without the permit complexity of structural work. Partial remodels start around $9,000 and typically finish faster - good news if you’re prepping a rental unit near State Road 7 or refreshing a home before listing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We work with 50+ recognized brands across every category, and we don’t substitute without your approval. In Margate kitchens, that means KraftMaid or Wellborn cabinetry, Cambria or Silestone quartz, and tile from manufacturers with Florida-approved moisture ratings. Our relationships with these suppliers mean faster lead times for Margate customers - no waiting eight weeks for a cabinet shipment while your kitchen sits torn apart. We also partner with prefab innovators including Mighty Buildings and Boxabl for homeowners considering ADU additions alongside their kitchen work, expanding what’s possible on the same property without bringing in a separate contractor.
Common Kitchen Remodeling Problems We See in Margate Homes
- Original electrical panels maxed by modern loads. That 100-amp Federal Pacific or Zinsco panel from 1973 can’t handle a Sub-Zero, induction cooktop, and microwave drawer simultaneously. We upgrade to 200 amps before finish work begins, not after the breaker trips mid-dinner party.
- Galvanized plumbing behind kitchen walls. These pipes corrode from the inside. We’ve opened walls in Oriole Estates to find flow restricted to a pencil-width stream. We repipe to copper or PEX before closing walls - one trip, done right.
- Humidity-damaged cabinetry and substrates. Margate’s coastal climate destroys particleboard and MDF within a year if not properly sealed. We specify plywood-box cabinetry with moisture-resistant finishes, not the budget options that swell and delaminate.
- Improper island drain venting in high water table conditions. That beautiful prep sink backs up because the drain line wasn’t vented correctly for Margate’s saturated soils. We engineer drainage that works with local conditions, not against them.
Pricing for Kitchen Remodeling in Margate, FL
A typical kitchen remodel in Margate runs $14,000-$45,000 depending on scope, material selections, and whether code-driven electrical or plumbing upgrades are needed. Small kitchen remodels and partial renovations start at $9,000. Here’s how specific line items break down for the local market:
| Service | Price Range in Margate |
|---|---|
| Kitchen Remodel (full) | $14,000 - $45,000 |
| Small Kitchen Remodel | $9,000 - $20,000 |
| Cabinet Installation | $4,000 - $13,000 |
| Countertop Installation | $2,000 - $6,500 |
| Backsplash Installation | $800 - $2,500 |
| Kitchen Island Installation | $3,000 - $10,000 |
What drives cost? Electrical panel upgrades add $2,500-$5,000. Galvanized plumbing replacement runs $1,500-$4,000 depending on linear footage. Structural wall removal with Broward County engineering and wind-load compliance adds $3,000-$8,000. We itemize every line in your estimate - no vague allowances that balloon later. Call (844) 665-0162 for an exact quote; estimates are free.
We Also Serve Cities Near Margate
Our crews work throughout northwest Broward County, including Kitchen Remodeling in Margate and surrounding cities. We regularly handle projects in Pompano Beach, Coconut Creek, North Lauderdale, and Coral Springs - the same CBS housing stock, the same code requirements, the same pattern knowledge that speeds every job.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Kitchen Remodeling in Margate
Almost certainly yes. A 1972 Margate home typically has a 100-amp panel that was already undersized when installed, and modern appliance loads - induction cooktops, microwave drawers, beverage centers - will overload it. We inspect your panel during the estimate and include any upgrade in the scope so you’re not mid-project with an inspector red-tagging the job. Call (844) 665-0162 and we’ll verify your service size on the first visit.
You can, but Broward County requires engineered plans and wind-load compliance inspection for any structural alteration on these 50-year-old homes. Many walls in these ranches are load-bearing or contain tie-beam connections that resist hurricane forces. We bring in a structural engineer, pull the proper permit, and sequence the work so your home never loses structural integrity. Skipping this step triggers stop-work orders and expensive re-engineering - we’ve seen it happen to homeowners who went with unpermitted contractors.
Most full kitchen remodels in Margate take 6-10 weeks from permit approval to final inspection. Electrical and plumbing upgrades add 1-2 weeks. Broward County’s inspection schedule typically adds 3-5 business days total across the project. We build this timeline into your contract and coordinate trades to minimize downtime - no disappearing crews or weeks between phases.
Only if your remodel includes window replacement or structural changes that affect the exterior envelope. For a straight kitchen gut with no window work, standard interior finishes apply. But if you’re expanding the kitchen footprint, adding a pass-through, or replacing that 1970s aluminum window above the sink, current Florida Building Code requires impact-rated or protected openings in the hurricane zone. We specify Andersen, PGT, or CGI impact-rated windows when needed, and we handle the product approval documentation for permit.
Margate’s flat, low-lying position means a water table often 12-24 inches below grade, which limits drain slope and venting effectiveness. Older homes also have galvanized drain lines that corrode internally, and original kitchen sinks were rarely vented to modern standards. During a remodel, we run camera inspections, replace deteriorated drains, and properly vent new fixtures so drainage works with local soil conditions - not against them.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Margate and South Florida homeowners since our founding.