Wood Fence in Andover, FL: What It Costs and How Long It Takes
A wood fence in Andover, FL typically runs $3,500-$9,000 for a standard residential installation, with most projects completed in 2-4 business days once permits clear. We use pressure-treated southern yellow pine or cedar, set in concrete footings engineered for South Broward’s high water table and hurricane wind loads. Call (844) 665-0162 and we’ll walk your property with you, mark the line, and give you a written estimate before we leave.
How We Build a Wood Fence - Start to Finish
Every wood fence we install in Andover follows a five-stage sequence. Homeowners know exactly where we are, what we’re doing, and what decision they need to make next.
Stage 1: Site survey and layout (Day 1, 2-3 hours)
We walk the property with you, locate utilities, confirm property lines, and flag any drainage or grade issues. In Andover’s 33023 ZIP, we regularly find shallow water tables - sometimes 2-3 feet down - so we plan post depth and concrete volume accordingly. You’ll decide fence height, gate placement, and whether you want the “good side” facing in or out. We mark everything with spray paint and stakes so you can visualize the line before we dig.
Stage 2: Permitting and HOA notification (3-10 business days, parallel to prep)
We pull the Broward County permit and submit HOA paperwork if your Andover neighborhood requires it. Most wood fences under 6 feet clear quickly, but we never start without the green tag. While we wait, we order materials to spec - never generic “fence-grade” lumber from a big-box store. You choose your wood species and picket style during this window; once ordered, changes cost time and money.
Stage 3: Demolition and excavation (Day 1 of construction, 4-6 hours)
If we’re replacing an existing fence, we remove it entirely - posts, concrete, and all - and haul it off. New installs start with augering post holes to 24-30 inches deep, depending on wind-load engineering for our HVHZ jurisdiction. The soil in older Andover lots often hides sprinkler lines, shallow coaxial cable from the 1980s, or undocumented drainage pipes from previous owners. We hand-dig around suspected utilities rather than risk a cut.
Stage 4: Post setting and framing (Days 1-2)
We set 4×4 posts in concrete rated for wet conditions, bracing plumb until cure. Then we install the horizontal rails - typically 2x4s for 4-foot fences, 2x6s for 6-foot privacy styles - with galvanized fasteners rated for exterior use. In Andover’s open, flat lots with little windbreak, we sometimes add a mid-span post or diagonal bracing on runs over 80 feet. You’ll see the skeleton go up; this is your last chance to adjust gate swing or add a cap rail.
Stage 5: Pickets, gates, and finish (Days 2-3)
We install pickets with consistent gaps for expansion, hang gates with adjustable hinges and quality latches, and apply sealant if specified. A standard 150-linear-foot privacy fence in Andover gets roughly 250-300 pickets. We walk the line with you, check every gate for smooth operation, and clean the site. Final Broward County inspection typically happens within 48 hours of our call.
The Wood Fence Options You’ll Actually Choose Between
- Pressure-treated southern yellow pine: The practical standard. ACQ-treated for termite and rot resistance, typically #2 grade or better. Costs less upfront, takes stain well, and lasts 12-15 years in South Florida if resealed every 2-3 years. The trade-off: it checks and cracks over time, and the greenish tint from treatment fades unevenly for the first few months.
- Western red cedar: Naturally rot-resistant without chemical treatment, lighter weight, straighter grain. Runs roughly 30-40% more than pine but needs less maintenance and weathers to a silver-gray if left unstained. Best for homeowners who want the look and don’t mind the premium. Not all HOAs in Andover allow the natural weathered look; check your covenants.
- Picket style - dog-ear, flat-top, or French gothic: Dog-ear is most common in Andover’s 1950s-1970s neighborhoods; it reads traditional without being fussy. Flat-top suits modern renovations. French gothic adds cost per picket but dresses up street-facing installations. Your HOA may mandate one style for front-yard visibility.
- Privacy vs. semi-privacy vs. shadowbox: Full privacy (tight pickets, no gaps) blocks sightlines and some wind but acts like a sail in our hurricane gusts - we engineer posts closer together. Semi-privacy with 1-inch gaps bleeds air through and costs slightly less in materials. Shadowbox looks finished from both sides, ideal if you’re splitting cost with a neighbor.
- Cap rail, post caps, and trim: A 2×6 cap rail protects end grain from rain intrusion and gives a fence a deliberate look. Post caps are decorative until they’re functional - in Andover’s sun, they slow the checking that starts at post tops. We stock simple pyramid caps; custom copper or solar caps you source yourself.
What Wood Fence Costs in Andover, FL
| Project scope | Typical range |
|---|---|
| Standard wood fence (150 linear ft, 6 ft privacy) | $3,500 - $6,500 |
| Large property or premium cedar upgrade | $6,500 - $9,000 |
| Gate addition (each) | $350 - $800 |
| Removal and haul-away of existing fence | $400 - $1,200 |
Five variables move your number within that range. Linear footage is obvious - we measure twice, but the math is the math. Existing fence removal adds labor and disposal; concrete-encrusted posts from a 1990s installation take longer than we hope. Grade and drainage work - if your Andover lot slopes or holds water after rain, we may need stepped construction or French drain coordination. Wood species and grade - cedar over pine, clear over knotty - shifts material cost significantly. Permit complexity - straightforward residential permits clear fast, but corner lots or drainage easements in Broward County can trigger review cycles that add time, not always money.
Our written estimate includes posts, concrete, lumber, fasteners, gates with hardware, and standard cap rail. It does not include HOA application fees, sprinkler line relocation (we’ll flag it and quote separately), or premium stains applied after installation. We can recommend painters who specialize in exterior wood if you want pro finishing.
What Andover Homes Specifically Mean for This Job
Andover sits within ZIP 33023 in Broward County - one of Florida’s High-Velocity Hurricane Zone jurisdictions - and that status changes how we build every wood fence here. The Florida Building Code requires that any fence over 6 feet or any fence with concrete footings in an HVHZ county meet wind-load standards that interior-state contractors often underestimate. We engineer post spacing, embed depth, and concrete volume for 140-mph gust exposure, not the 90-mph tables you’ll find in standard carpentry guides.
The housing stock matters too. Andover’s concentration of 1950s-1970s CBS homes means we’re frequently fencing properties with original slab foundations, mature oak canopies whose root systems interfere with post lines, and decades of homeowner-added irrigation that nobody mapped. We’ve hit unmarked gray-water lines on three jobs in the past two years alone. The water table here - 2-5 feet below grade - means post holes want to fill with groundwater before concrete sets; we pump and pour same-visit, never leave an open excavation overnight.
Permitting in Broward County is thorough but predictable if your paperwork is clean. Inspectors verify post depth, concrete cure evidence, and setback from drainage easements. If your Andover neighborhood has an active HOA, front-yard fence materials and heights often face additional restrictions; we handle both sets of approvals as part of a full Fence Installation in Andover project.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Wood Fence in Andover
Most wood fence projects in Andover take 2-4 days of actual construction once the permit is released. Permitting itself adds 3-10 business days depending on Broward County’s current queue. Call (844) 665-0162 and we’ll check current turnaround times when we quote.
Yes - Broward County requires permits for any fence with concrete footings or exceeding 6 feet in height, which covers nearly all residential wood fences we install. We pull the permit as part of our standard process; you don’t visit the county office yourself. Our Fence Installation crew handles the paperwork and schedules inspection.
Usually, yes - we design post placement to avoid known sprinkler zones, and we hand-dig cautiously around suspected lines. If we hit an unmapped line (common in Andover’s older lots), we stop, show you the damage, and can coordinate a repair with our landscaping contacts or yours. We don’t bury surprises.
Cedar lasts longer with less maintenance and weathers more attractively, but pressure-treated pine properly sealed every 2-3 years gives you 12-15 solid years at significantly lower upfront cost. For rental properties or budget-focused renovations in Andover, pine is the rational choice. For your own home where you’ll see it daily, cedar’s premium often pays off in satisfaction.
We warranty our workmanship - post plumb, gate operation, structural integrity - for two years. Wood itself is an organic material; we don’t warranty against natural checking, warping, or decay that occurs without maintenance. We document proper care at handoff, and we’re available for maintenance calls. Many homeowners pair their fence project with Paver Driveways in Andover or Concrete Driveways & Concrete Work in Andover to coordinate the full exterior upgrade under one contractor.
Get Your Andover Wood Fence Estimate
We’ll walk your property, confirm measurements, check for utilities and drainage, and leave you with a written estimate - no deposit required to schedule, no pressure to decide on the spot. Call (844) 665-0162 or request a callback. Most Andover wood fence projects can start within two weeks of estimate approval.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Andover and South Florida homeowners with full-scope residential construction from driveway to roofline.