Tub-to-Shower Conversion in Country Club, FL: What It Costs and How Long It Takes
A tub-to-shower conversion in Country Club, FL typically runs $3,500-$10,000 and takes 5-10 business days from permit approval to final inspection. Most homeowners keep the existing drain location and wet-wall layout, which keeps the timeline tight and the price toward the lower end. Call (844) 665-0162 and we’ll walk your exact layout and give you a written estimate with no obligation.
Country Club’s housing stock shapes this job more than most homeowners expect at first. The CBS tract homes built here between 1985 and 2005 - the vast majority of what we work on - were designed around tub-centric bathrooms with 60-inch alcove rough-ins and cast-iron or steel tubs set on slab. Converting them means working within concrete, block, and sometimes post-Andrew structural upgrades that don’t exist just a few miles north in Broward County.
How We Handle Tub-to-Shower Conversion Start to Finish
We’ve refined this into five clear stages so you know what’s happening, what you’re deciding, and when we’ll need access.
Stage 1: On-site measure and scope lock (Day 1, 1-2 hours)
We photograph the existing tub, measure the alcove or surround, locate the drain, and test water pressure. Here’s where you decide: keep the drain where it is, or relocate it for a curbless or center-drain design? Relocation adds $800-$2,400 but opens up walk-in and aging-in-place configurations. We also flag any electrical that needs GFCI relocation or vent-fan upgrades. You’ll have a written estimate before we leave.
Stage 2: Permit pull and material order (Days 2-7, homeowner downtime)
We submit to Miami-Dade Building and submit HOA architectural review if your community requires it. Many Country Club subdivisions do. Material lead times vary: a standard fiberglass or acrylic surround ships in 3-5 days; custom tile or a Kohler Choreograph system can run 2-3 weeks. We don’t demo until materials are on-site and permits are in hand.
Stage 3: Demo and rough-in (Days 8-10, 1-2 days on-site)
Out comes the tub, the surround, and often the drywall or cement board behind it. If we’re keeping your drain location, this stage moves fast. If we’re cutting slab for a drain move, we coordinate around the water table - trenching in Country Club’s wet season (May through October) can mean dewatering that adds a half-day. We rough in new valves, test lines, and inspect before closing walls.
Stage 4: Waterproofing, surround, and fixture set (Days 11-14, 2-3 days on-site)
This is where your material choice shows. A direct-to-stud acrylic unit goes up in hours. Custom tile with Schluter-Kerdi or Laticrete Hydro Ban waterproofing takes 2-3 days: float, tile, grout, seal. We set your valve trim, showerhead, and any grab bars or corner shelves. You do a walk-through before we seal everything.
Stage 5: Final inspection and closeout (Day 15, 2-4 hours)
Miami-Dade inspects for plumbing and, if we touched structure or electrical, for those trades too. We pass the certificate to you, handle the HOA completion letter if required, and haul every scrap. You’re left with a shower that meets current HVHZ-adjacent code - important if you ever sell or refinance.
The Choices That Shape Your Tub-to-Shower Conversion
Every option below is a real fork in the road we’ve walked homeowners through on Country Club jobs. Here’s what each costs you in dollars and daily use:
- Acrylic or fiberglass surround ($3,500-$5,500 range): Lightweight, mold-resistant, installed fast. The trade-off is limited style range and a 10-15 year lifespan before surface wear shows. Best for rental properties or homeowners who want function over form and minimal downtime.
- Tile with cement board or foam-board waterproofing ($5,500-$8,500 range): Infinite design flexibility, 20+ year durability, and higher resale appeal. The trade-off is maintenance - grout needs sealing every 1-2 years in South Florida’s humidity - and a longer install. We typically spec porcelain over ceramic for Country Club’s hard water.
- Solid-surface panel system like Kohler Choreograph or Swanstone ($6,000-$9,500 range): Seamless walls, no grout to maintain, modern matte or textured finishes. The trade-off is higher material cost and fewer local installers who work with it daily. We do - it’s become popular for homeowners aging in place.
- Keep existing drain vs. relocate ($0 vs. $800-$2,400): Keeping it means a faster, cheaper job with a standard 36×60 or 32×60 footprint. Relocating opens curbless entry, larger format tile without slope compromises, and ADA-compliant thresholds. In Country Club’s slab-on-grade homes, drain moves mean concrete cutting - we map rebar and post-tension cables before any blade touches the floor.
- Fixture grade - Moen, Kohler, or Delta builder lines vs. designer series ($200-$1,200+): Builder-grade valves and trim last 10-15 years and carry solid warranties. Designer lines add finish options (brushed gold, matte black) and heavier metal castings. We install what you spec - no proprietary lock-ins.
What Tub-to-Shower Conversion Costs in Country Club, FL
| Component | Price Range |
|---|---|
| Basic tub-to-shower conversion (keep drain, acrylic surround) | $3,500-$5,500 |
| Mid-range conversion (tile surround, standard fixtures) | $5,500-$7,500 |
| Full reconfiguration (drain move, curbless, custom glass, premium fixtures) | $7,500-$10,000 |
Five variables push you up or down this range:
1. Existing condition. A steel tub in a 1987 CBS home often comes out in pieces with significant surround damage. A 2002 fiberglass unit might pop out clean. We won’t know until we’re eyes-on, but we price both scenarios in our estimate.
2. Drain and plumbing location. Keeping the wet wall and drain saves $800-$2,400. Moving either means concrete work, permit amendments, and sometimes a second inspection.
3. Material grade and waterproofing system. Acrylic vs. tile vs. solid-surface spans roughly $2,000 in material and labor difference at the shower footprint we typically see in Country Club’s 60-inch alcoves.
4. Permit scope and HOA requirements. Miami-Dade permits for a wet-area remodel run $250-$600 depending on trade involvement. HOA architectural review can add 1-3 weeks to the front end - not a dollar cost, but a timeline cost worth planning around.
5. Electrical or vent upgrades. Older Country Club baths sometimes lack GFCI protection at the vanity or have vent fans ducted into attic space. Code-correcting these adds $300-$900 but protects your inspection pass.
Our written estimates include demo, disposal, rough plumbing, waterproofing, surround installation, fixture set, permit fees, and final inspection. What they don’t include: custom glass enclosure (we quote separately after tile is set, since measurements must be final), vanity or floor tile outside the wet area, or mold remediation if we find it behind walls. We photograph and stop for your decision if we hit anything unexpected.
What Country Club Homes Specifically Add to This Job
Country Club isn’t a generic Miami suburb - it’s a specific patch of late-80s-to-mid-90s development on the edge of the Everglades drainage basin, and that geography changes how we bid and build tub-to-shower conversions here.
The CBS tract homes we work on most - particularly in communities off NW 186th Street and around Country Club Middle School - were built as Miami-Dade’s building code was rewriting itself after Hurricane Andrew. Homes permitted before 1994 often have tub surrounds glued to drywall with no cement backer, no vapor barrier, and cast-iron drains that have corroded at the slab interface. We’ve opened walls in these houses and found the studs behind the tub wet for years. That discovery doesn’t derail the project, but it adds $400-$1,200 in rot repair and proper cement-board or foam-board waterproofing that a 2002 build wouldn’t need.
Then there’s the permit reality. Country Club sits inside Miami-Dade County’s High-Velocity Hurricane Zone, the strictest wind-load jurisdiction in the country. For a tub-to-shower conversion, this matters most if your job touches a window, an exterior wall, or any structural member - and in a small bathroom, that’s more common than you’d think. We handle the HVHZ compliance documentation so your inspection doesn’t stall. Homeowners who’ve worked with Broward County contractors before are sometimes surprised by the extra layer; we’ve been pulling Miami-Dade permits long enough to build it into our timeline from day one.
The water table is the other local factor we plan around. Country Club’s porous Miami Limestone sits 18-24 inches below grade in the wet season. Any drain relocation that requires trenching gets scheduled for drier months when possible, or we spec a dewatering plan that protects the slab’s integrity. It’s not a dealbreaker, but it’s a detail that separates a Country Club-specific estimate from a template pulled from Fort Lauderdale.
Many homeowners doing a tub-to-shower conversion here are also addressing exterior concerns - Metal Roofing in Country Club or Tile Roofing in Country Club often comes up in the same conversation, especially for pre-1994 homes where a roof project triggers full NOA compliance upgrades. As your single-source contractor, we can sequence interior and exterior work so you’re not juggling separate crews.
Serving Country Club, FL - Our Local Coverage Area
We’re based in the Country Club area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Tub-to-Shower Conversion in Country Club
From permit approval to final inspection, 5-10 business days for a standard conversion keeping the existing drain and wet wall. Add 3-7 days if we’re relocating plumbing, cutting slab, or waiting on HOA architectural review - common in Country Club’s deed-restricted communities. Call (844) 665-0162 and we’ll estimate your specific timeline after a 20-minute walkthrough.
Yes - Miami-Dade County requires a plumbing permit for any wet-area fixture change, and if we touch electrical (GFCI, vent fan, lighting) or structure, those trades need permitting too. We pull everything and schedule inspections. The permit fee typically runs $250-$600 depending on scope, and we include it in your written estimate.
Usually yes, and that’s the most common approach we use in Country Club’s 60-inch alcove tubs. The existing drain and valve locations work for a standard 36×60 or 32×60 shower pan or curbed base. If you want a curbless walk-in or a larger format, we may need to relocate the drain - we decide together after measuring slope, slab thickness, and your mobility needs.
$3,500 is the floor for a straightforward swap: remove tub, install direct-to-stud acrylic surround, keep drain and valve locations, reuse or replace with builder-grade fixtures, pass inspection. That assumes no hidden rot, no electrical upgrades, and no HOA delays. We hit this number regularly on post-2000 builds with clean demo. Call (844) 665-0162 for an exact quote - estimates are free.
Our workmanship warranty covers installation and waterproofing. Manufacturer warranties apply to your specific materials - typically 10 years on acrylic surrounds, limited lifetime on Kohler and Moen valves, and 25 years on Schluter waterproofing systems. We register all warranties in your name and leave you with documentation, not just a handshake.
Ready to Convert Your Tub to a Shower in Country Club?
Call (844) 665-0162 for a free on-site estimate. Raymond Estevez or a member of our Bathroom Remodeling crew will walk your bathroom, measure the alcove, check drain and valve access, and email you a written estimate within 24 hours. If your tub-to-shower conversion is part of a full Bathroom Remodeling in Country Club project, we’ll sequence it with flooring, vanity, and any exterior work so you’re not living in a construction zone longer than necessary.
Written by Raymond Estevez, Owner at Groundwork Construction Co., serving Country Club and South Florida homeowners since 2015.